Testing and Analysis Techniques for Safety Assessment of Rail Vehicles: The State-of-the-Art

The methods currently being used in North America, Britain and Europe for the safety assessment of rail vehicles are discussed. There is considerable disparity between the methods that have been developed in the different countries. These differences, and the possible reasons for them, are discussed in the paper. Finally, conclusions are drawn and some recommendations are made for the future direction of safety assessment methods.     

An integrated model system and policy evaluation tool for maximizing mobility under environmental capacity constraints: A case study in Dalian City,China

This paper presents an integrated model system for mobility maximization based on a quantified specification of environmental capacity, and evaluates policy interaction and effectiveness by simulating a number of policy scenarios. The system is designed to specify the maximum level of car ownership and number of trips by private and public modes subject to an environmental capacity constraint defined as the frontier emission under maximum system efficiency. Four types of hypothetical policies (population change, urban sprawl, land-use pattern and network improvement) are designed and the effects of 13 policy scenarios are simulated using data of Dalian City, China. Results reveal that the integrated model system reacts sensitively to policy interventions. The urban sprawl reflected in a changing residential distribution from central to suburban areas is most instrumental from the perspective of pollution alleviation. If the goal is to simultaneously reduce emissions while accommodating mobility, two combinational policy scenarios outperform all others.     

Estimation of the effects of aircraft noise on residential satisfaction

This study assesses the effects of aircraft noise on residential satisfaction, an important indicator of subjective well-being. A structural equation model is specified that estimates the relationships between objective variables, noise annoyance variables and residential satisfaction. Secondary data-analysis is used to estimate the model. The survey was conducted in 1996/1997 among the population living within a 25-km radius of Amsterdam Schiphol, the largest airport in the Netherlands. The effect of aircraft noise annoyance is found to be relatively small. In addition, the objective level of aircraft noise exposure is found to be a better predictor of residential satisfaction than its subjective counterpart. The most important determinants of residential satisfaction are found to be road traffic noise annoyance, age and neighbor noise annoyance.     

A New Explicit Algorithm for Bi-Phasic Mixture Flow in MIM

Metal injection moulding (MIM) is a new technology to manufacture small intricate parts in large quantity. Numerical simulation plays an important role in its development. To predict the specific segregation effect in MIM injection, mixture theory is adopted to model the injection flow by a bi-phasic model. This model conducts to the solution of two-coupled Stokes equations. It is an extremely computational consuming solution in the scope of the traditional algorithms, which induce a serious challenge to cost-effectivity of the MIM simulation. Referred to some methods proposed by Lewis in mono-phasic simulation and the implicit algorithms in MIM simulation, a new explicit algorithm is proposed and realized to perform efficiently this type of bi-phasic flow. Numerically this algorithm is devised to perform the simulation in a fully uncoupled manner except for a global solution of the pressure field in each time step. The physical coupling is taken into account in a sequential pattern by fractional steps. This special algorithm does not need any iteration, so it is straightforward and robust, suitable for MIM simulation and other sorts of simulations for multi-phasic flow.     

Comparison of advanced imputation algorithms for detection of transportation mode and activity episode using GPS data

Global Positioning System (GPS) technologies have been increasingly considered as an alternative to traditional travel survey methods to collect activity-travel data. Algorithms applied to extract activity-travel patterns vary from informal ad-hoc decision rules to advanced machine learning methods and have different accuracy. This paper systematically compares the relative performance of different algorithms for the detection of transportation modes and activity episodes. In particular, naive Bayesian, Bayesian network, logistic regression, multilayer perceptron, support vector machine, decision table, and C4.5 algorithms are selected and compared for the same data according to their overall error rates and hit ratios. Results show that the Bayesian network has a better performance than the other algorithms in terms of the percentage correctly identified instances and Kappa values for both the training data and test data, in the sense that the Bayesian network is relatively efficient and generalizable in the context of GPS data imputation.     

On the implementation of an auxiliary pantograph for speed increase on existing lines

The contact between pantograph and catenary at high speeds suffers from high dynamic contact force variation due to stiffness variations and wave propagation. To increase operational speed on an existing catenary system, especially for soft catenary systems, technical upgrading is usually necessary. Therefore, it is desirable to explore a more practical and cost-saving method to increase the operational speed. Based on a 3D pantograph–catenary finite element model, a parametric study on two-pantograph operation with short spacing distances at high speeds shows that, although the performance of the leading pantograph gets deteriorated, the trailing pantograph feels an improvement if pantographs are spaced at a proper distance. Then, two main positive effects, which can cause the improvement, are addressed. Based on a discussion on wear mechanisms, this paper suggests to use the leading pantograph as an auxiliary pantograph, which does not conduct any electric current, to minimise additional wear caused by the leading pantograph. To help implementation and achieve further improvement under this working condition, this paper investigates cases with optimised uplift force on the leading pantograph and with system parameter deviations. The results show that the two positive effects still remain even with some system parameter deviations. About 30% of speed increase should be possibly achieved still sustaining a good dynamic performance with help of the optimised uplift force.     

Practicability study on the suitability of artificial,neural networks for the approximation of unknown steering torques

For steer-by-wire systems, the steering feedback must be generated artificially due to the system characteristics. Classical control concepts require operating-point driven optimisations as well as increased calibration efforts in order to adequately simulate the steering torque in all driving states. Artificial neural networks (ANNs) are an innovative control concept; they are capable of learning arbitrary non-linear correlations without complex knowledge of physical dependencies. The present study investigates the suitability of neural networks for approximating unknown steering torques. To ensure robust processing of arbitrary data, network training with a sufficient volume of training data is required, that represents the relation between the input and target values in a wide range. The data were recorded in the course of various test drives. In this research, a variety of network topologies were trained, analysed and evaluated. Though the fundamental suitability of ANNs for the present control task was demonstrated.     

Design process to minimize roof surface defects using a flexural function and Finite Element analysis

The appearance and exterior precision of passenger cars aesthetics has become an important factor in the automotive industry. During vehicle assembly, the curvature of the roof can change slightly and create cosmetic defects that affect the exterior appearance. The critical factor causing curvature change on the roof is the thermally driven expansion of an elastomer-based mastic sealer which is applied between the exterior roof panel and support rail during the frame assembly process. Therefore the expansion of the mastic sealer was modeled to predict the curvature change in the roof panel. In order to evaluate the causes and predict the curvature change quantitatively, a Finite Element (FE) simulation of the oven heating and mastic curing was performed. Validation of the simulation model was performed by comparing the local deformation and amount of the curvature change on the roof obtained from the actual process. In order to minimize the curvature change, the Taguchi method was used in conjunction with the FE model where a total of eight factors were chosen to perform a sensitivity analysis. In order to exclude the deformation due to residual stress resulting from the oven process, it was selected as a noise factor. Response was taken as the maximum curvature change calculated by a flexural function which was used to distinguish absolute curvature that is not affected by the horizontal or vertical movement of roof panel. A total of 18 cases were analyzed with length of each sealer, pitch of sealer, and rail location being identified as the most influential factors affecting the curvature change. Using the optimum values, the amount of curvature change in the roof panel was reduced by 12 percent.     

Experimental study of EGR cooler regeneration aided by oxygen-fed NTP and air-fed NTP

Based on non-thermal plasma (NTP) technology fed by oxygen and air as the gas source respectively, the experimental system of exhaust gas recirculation (EGR) cooler regeneration was built to do a study at different regeneration temperatures. By measuring the concentration of main active substance and CO_x in regeneration process, the influence of temperature on regeneration aided by oxygen-fed NTP and air-fed NTP was investigated. The experimental results indicate that EGR cooler can be regenerated both by air-fed NTP and oxygen-fed NTP at a wide temperature range of 18 °C ～ 300 °C. By comparison of the regeneration with oxygen-fed NTP and air-fed NTP, it can be easily known that the regeneration effect is most remarkable at 150 °C with oxygen-fed NTP and at 120 °C with air-fed NTP. In addition, when the temperature is below 150 °C especially at 120 °C, the regeneration efficiency of air-fed NTP is lower than oxygen-fed NTP, nevertheless, when the temperature is above 150 °C, air-fed NTP has a superiority in regeneration and the higher the temperature is, the more obvious the superiority will be.