Further study on the ultimate strength analysis of spherical pressure hulls

From a comparative study it is concluded that current design rules for the spherical pressure hull of manned submersible need to be updated and unified. In this paper, a series of spherical pressure hulls are calculated by nonlinear FEM. Based on these numerical results, the influence of critical arch length and the relationship of ultimate strength with t/R and structural imperfection are studied. Finally, empirical formulae for the ultimate strength of the titanium alloy spherical pressure hull of deep manned submersible based on numerical computations are given. The formulae can be used as the core equations to update current design rules.     

Meeting an 80% reduction in greenhouse gas emissions from transportation by 2050: A case study in California

This paper investigates how California may reduce transportation greenhouse gas emissions 80% below 1990 levels by 2050 (i.e., 80in50). A Kaya framework that decomposes greenhouse gas emissions into the product of population, transport intensity, energy intensity, and carbon intensity is used to analyze emissions and mitigation options. Each transportation subsector, including light-duty, heavy-duty, aviation, rail, marine, agriculture, and off-road vehicles, is analyzed to identify specific mitigation options and understand its potential for reducing greenhouse gas emissions. Scenario analysis shows that, while California’s 2050 target is ambitious, it can be achieved in transport if a concerted effort is made to change travel behavior and the vehicles and fuels that provide mobility. While no individual ‘‘Silver Bullet” strategy exists that can achieve the goals, a portfolio approach that combines strategies could yield success. The 80in50 scenarios show the impacts of advanced vehicle and fuels technologies as well as the role of travel demand reduction, which can significantly reduce energy and resource requirements and the level of technology development needed to meet the target.     

Modeling the structural relationships among short-distance travel amounts,perceptions, affections,and desires

Using structural equation modeling, the relationships among travel amounts, perceptions, affections, and desires across five short-distance (one-way trips of less than 100 miles) travel categories (overall, commute, work/school-related, entertainment/social/recreation, and personal vehicle) are examined. The models are estimated using data collected in 1998 from more than 1300 working commuters in the San Francisco Bay Area. A cross-model analysis reveals three robust relationships, namely: (1) myriad measures of travel amounts work together to affect perceptions; (2) perceptions are consistently important in shaping desires; and (3) affections have a positive relationship with desires. The second finding suggests that two individuals who travel the same objective amount may not have the same desire to reduce their travel: how much individuals perceive their travel to be is important. The third point argues that the degree to which travel is enjoyed is a key determinant of shaping desires to reduce travel: the more travel is enjoyed, the less the desire to reduce it.     

Shipping and investment incentives: a trilogy Part 2. Investment incentives for shipping

This paper concentrates on the shipping industry and considers the forms of fiscal and financial incentives which are used by different governments to promote or encourage investment in their shipping industry. The analysis reduces the various packages of investment incentives and loan arrangements to a common measurement—the net present value of the package—and uses this to draw international comparisons and rankings. The results are based on different values of rates of return in the shipping industry and under certain assumptions concerning the rate of inflation and the rate of discount. Differences in loan arrangements have also been incorporated. The particular results are valid only for the specified circumstances but the methodology is generally applicable.     

Use of a probabilistic particle tracking model to simulate the Prestige oil spill

A probabilistic particle tracking model is used to simulate the oil dispersion after the Prestige wreckage. This oil spill constitutes a suitable benchmark to analyze the capabilities of a probabilistic model, since the time elapsed from wreckage to oil landing (12 days) is much longer than the reliability time associated with forecast winds, usually on the order of 3–4 days. The particle model can be run in two different modes: real time mode (when existing reliable wind fields for the event under scope) and in probabilistic mode (in absence of reliable wind fields but with historical fields corresponding to a similar period). The validity of the particle model is first evaluated in a hindcast way, running the Prestige case with the wind fields corresponding to the period November 19 to November 30, 2002, which were not available at the moment of the wreckage. Calculations show the accuracy of the model to provide the right impact point and timing. The probabilistic model is then used to simulate the same event by means of historical data. The region where the oil landed is shown to be the area with the highest probability to be impacted.     

Optimal Active Suspension Design Using a Frequency-shaping PID Filter

By the incorporation of frequency-shaping into the linear quadratic methods used in active suspension design it is possible to achieve improvements in both body frequency response and road-holding. The use of a PID filter for this purpose also leads to robustness of the system to disturbance forces. Zero steady-state deflections are achieved for applied body loads by the integral action with excellent attenuation of the transient response. The resulting system consists of a hydraulic actuator in parallel with a body spring of arbitrary stiffness and is optimal with equivalent full state feedback.     

Initial results from long-term measurements of atmospheric humidity and related parameters in the marine boundary layer at two locations in the Gulf of Mexico

Measurements of boundary layer moisture have been acquired from Rotronic MP-100 sensors deployed on two NDBC buoys in the northern Gulf of Mexico from June through November 1993. For one sensor, which was retrieved approximately 8 months after deployment, the post- and precalibrations agreed closely and fell well within WMO specifications for accuracy. The second sensor operated continuously from June 1993 to February 1997 (3.5 years). Buoy observations of relative humidity and supporting data were used to calculate specific humidity and the surface fluxes of latent and sensible heat. Specific humidities from the buoys were compared with observations of moisture obtained from nearby ship reports, and the correlations were generally high (0.7–0.9). Surface gravity wave spectra were also acquired. The time series of specific humidity and the other buoy parameters revealed three primary scales of variability, small (h), synoptic (days), and seasonal (months). The synoptic variability was clearly dominant and occurred primarily during September, October, and November. Most of the synoptic variability was due to frontal systems that dropped down into the Gulf of Mexico from the continental US followed by air masses which were cold and dry. Cross-correlation analyses of the buoy data indicated that: (1) the moisture field was highly coherent over distances of 800 km or more in the northern Gulf of Mexico; and (2) both specific humidity and air temperature served as tracers of the motion associated with propagating atmospheric disturbances. These correlation analyses also revealed that the prevailing weather systems generally entered the buoy domain from the South prior to September, but primarily from the North thereafter. Spectra of the various buoy parameters indicated strong diurnal and semidiurnal variability for barometric pressure and sea surface temperature (SST) and lesser variability for air temperature, wind speed and significant wave height. The surface fluxes of latent and sensible heat were dominated by the synoptic events which took place from September through November with the transfer of latent heat being primarily from the ocean to the atmosphere. Finally, an analysis of the surface wave observations from each buoy, which included calculations of wave age and estimates of surface roughness, indicate that major heat and moisture flux events coincide with periods of active wave growth, although the data were insufficient to identify any causal relationships.     

The Effect of Topboxes on Motorcycle Stability

Hot wire anenometry measurements have been made in the wake of a model motorcycle and rider mounted in a windtunnel. Only in tests with a topbox present is there clear evidence of eddy shedding. Calculations have been performed on the corresponding full-scale motorcycle to determine the frequencies of the weave and wobble modes. Comparison with the wake frequencies extrapolated to full size show that at speeds of 31-34 m/s they coincide with those of the wobble mode which is found to be efficiently coupled to the aerodynamic excitation.     

带功率因数补偿的单相半控桥整流器(一)

介绍了绘制正弦线电流的开关模式单相半控桥整流器,用它来获得功率因数补偿并保持直流环节电压的恒定.在该整流器中使用4个有源开关,以便在交流端电压上产生单极脉宽调制(PWM)电压波形.与中性点箝位变流器(NPC)相比,该整流器没有箝位二极管也能实现三点式PWM控制.控制电路采用两个控制回路:外部控制回路用比例积分电压控制器调整直流环节电压,采用相位闭环电路产生与电源电压同相的正弦波形来实现功率因数补偿.在内部控制回路中,用基于载波的电流控制器跟踪线电流信号.为补偿由于负载变化所引起的中点电压,控制电路采用中点电压补偿器.该整流器的交流侧可产生3个电压电平,并用计算机仿真与试验结果验证了控制算法的有效性.