A derived demand model of regional highway diesel fuel use

A regional, econometric model of heavy truck diesel fuel use is derived based on the theory of production. Input demand functions for new trucks and diesel fuel are specified and estimated. A simple, logistic scrappage model is estimated and used to estimate total heavy truck stocks and diesel-engine heavy truck stocks. Demand equations based on the AIDS almost ideal demand system flexible form cost function are estimated for new heavy truck demand and regional highway diesel fuel demand. New heavy truck demand is found to be elastic with respect to GNP, inelastic with respect to own price, and appears extremely sensitive to short term GNP trends. The short run price elasticity of diesel fuel demand is found to be very small.     

Tractor Handling during Control Loss on Sloping Ground

Tractor behaviour on sloping ground following a control loss due to rear wheel locking is examined. A mathematical model to predict the tractor trajectory is presented and the results obtained from this model are compared with those obtained from experiments with a remotely controlled tractor.

Reasonable agreement is reached between measured and predicted results - the discrepancies arise from limited tyre data or local random variations in slope, ground roughness or tyre/ground frictional values.

Within these limitations, the model is used to examine possible driver strategies following a control loss. Applying and maintaining full lock for this particular type of accident appears to improve safety; it certainly tends to avoid the worst situation in which the tractor accelerates backwards down the slope and reaches dangerously high speeds although inevitably it increases the likelihood of a low speed overturn.     

Federal ports policy

In contrast to the centralized port-planning framework that is utilized in some industrialized countries, the US relies on a complex and fragmented framework in which responsibility for the planning, development and operation of landside maritime infrastructure rests with State and local governments. It has been argued that the separation of the federal government from port policy was rooted in the port preference clause of the Constitution. This paper is an effort to determine whether the current decentralized port policy in fact stems from the Constitution and, to that end, reviews how over the years the US Supreme Court has construed the port preference clause in the Constitution. It was found that there is no evidence to support the assertion that the port preference clause has restricted the development of Federal port policy. Moreover, the decentralized and fragmented decision-making process that is evident today does not imply the absence of federal impact. Rather, it reflects federal involvement through multiple agencies and regulatory processes and is a conscious effort, consistent with other areas of transport infrastructure development, to retain local decision-making for infrastructure investments. It is concluded by raising the issue whether current federal involvement in ports (that is, existing federal port policy), through dredging, landside transportation improvements or subsidized capital, among other things, needs to be reappraised before a new round of capital intensive investment begins.     

A dynamic model of travel mode switching behaviour

An analogy is developed between individual traveler mode choice decisions and time-dependent product adoption processes in consumer behaviour. The structure of the adoption sequence is first described conceptually with reference to mode switch ing; this structure is then used to develop a simple mathematical model of mode switching behaviour over time. Factors to be considered in interpreting and operationalizing the model are then discussed at some length. The model appears too complex for direct mathematical solution except in the simplest cases; it may however, be amenable to numerical estimation, given empirical data on mode switching behaviour over time.     

Knock in dual-fuel diesel combustion with an E85 ethanol/gasoline blend by multi-dimensional simulation

In this paper, knocking combustion in dual-fuel diesel engine is modeled and investigated using the CFD code coupled with detailed chemical kinetics. The ethanol/gasoline blend E85 is used as the primary fuel in a dual-fuel combustion concept based on a light-duty diesel engine equipped with a common-rail injection system. The E85 blend is injected and well mixed with intake air in the intake manifold and is ignited by the direct injection diesel fuel. A 46-species, 187-reaction Multicomponent mechanism is adopted to model the auto-ignition process of the E85/air/diesel mixture ahead of the flame front. Based on the model validation, knocking combustion under boost and full load operating condition for 0 %, 20 %, 50 %, as well as 70 % E85 substitute energy is simulated. The effects of E85 substitute rate and two stage injection strategies on knock intensity, power output, as well as location of the auto-ignition initiation is clearly reproduced by the model. The calculation result shows that, for a high E85 rate of 50 % and 70 % with single injection strategies, the most serious knock and the origin of auto-ignition always occurs far away from where the flame of diesel spray is first generated, at the center of combustion chamber, due to higher pressure wave, relatively richer E85 mixture and longer distances of flame propagation. The two stage injection strategies with a small amount of diesel pilot injection ahead of the main injection primarily influence the ignition behavior of the directly injected fuel, leads to a lower pressure rise rate and a reduced propagation distance, both of which contribute to the attenuation of knock intensity for a higher E85 rate.     

Novel hybrid optimal algorithm development for DC motor of Automated Manual Transmission

A novel hybrid optimal algorithm for DC motor of electro-mechanical Automated Manual Transmission (AMT) is presented. It combines non-linear time optimal controller and optimal Linear Quadratic Regulator (LQR) consequently used at different shifting stages. The working principle and dynamic characteristics of the AMT system are firstly presented, and the model of the DC motor is analyzed in detail. The non-linear time optimal controller is designed to explore the potential of the motor and minimize the gear shifting time. While the optimal LQR is then adopted at the final shifting stage to avoid overshoot and increase system robustness. Based on the position control algorithm of the actuators, the coordinated shifting control strategy is also proposed. Both simulation and vehicle test results demonstrate that, this control algorithm could decrease the shifting time and improve the shift quality effectively.     

Bayesian game-theoretic approach based on 802.11p MAC protocol to alleviate beacon collision under urban VANETs

Vehicular Ad-hoc Networks (VANETs) facilitate the broadcasting of status information among vehicles. In the IEEE 802.11p/WAVE vehicle network environment, the strict periodic beacon broadcasting of safety messages requires status advertisement to assist drivers in maintaining safety. The beacon broadcasting is required for real-time communication, and for avoiding the degradation of communication channels in high vehicular density situations. However, a periodic safety beacon in the IEEE 802.11p/WAVE standard can only transmit packets on a single channel using the MAC protocol. In high vehicular density situations, the channel becomes overloaded, thereby increasing the probability of beacon collision, and hence reducing the influx of successfully received beacons, which increases the delay. Many studies have indicated that appropriate congestion control algorithms are essential to provide efficient operation of a network. In this paper, to avoid beacon congestion, we have considered game theoretic models of wireless medium access control (MAC) where each transmitter makes individual decisions regarding their power level or transmission probability. We have evaluated the equilibrium transmission strategies of both the selfish and the cooperative user. In such a game-theoretic study, the central question is whether Bayesian Nash equilibrium (BNE) exists, and if so, whether the network operates efficiently at the equilibrium point. We proved that there exists only one BNE point in our game and validated our result using simulation. The performance of the proposed scheme is illustrated with the help of simulation results.     

Design and simuation of a vehicle test bed based on intelligent transport systems

As growing demand of vehicle safety system, especially regarding intelligent transport systems (ITS), automotive manufacturers are focusing more on driving safety and efficient transportation for vehicle users. Many safety systems have been launched in the market recently so, it is important to evaluate the vehicle safety systems and ITS. The ITS based intelligent vehicle test bed was constructed to meet the growing demand of test and verification for such ADAS and ITS systems. First, this paper describes in detail concept of the test-bed. This test-bed is carefully designed to meet the requirements of ISO/TC204 standards. In order to verify the design of the test-bed, virtual test with driving siulator was processed on a virtual test tracks. This test-bed will be used to conduct testing on various ITS and ADAS technologies, such as adaptive cruise control (ACC), lane departure warning system (LDWS), cooperative intersection warning system as well as rollover stability control (RSC) and electronic stability control (ESC), etc.