Use of 3D compartment model for simplified full ship FE model. Part I: construction of FE model

Classification societies cannot cover the torsional strength assessment with simple empirical formula as the size of a containership increases drastically over 10 000 TEU in recent years. Torsional strength of a container ship is very difficult to estimate with an analytical method due to its alternatively varying cross sections, i. e. an open and a closed section. This article proposes an approach to construct a simplified FE model using a 3D compartment model available from the beginning of ship design process. The model is cut to pieces of lots of small pieces of lines by a set of transverse, longitudinal and horizontal planes. Two algorithms are developed for mesh generation of internal structures; one for assembling the broken lines into closed loops and the other for automatically generating mesh from the loops. Another algorithm is proposed to generate mesh for outer hull using outermost nodes of the FE model built for internal members. The validity of the simplified model is discussed along with a beam theory based approach in J Mar Sci Technol (2008)     

Characteristics of VIV in multi-degree-of-freedom tensioned beams using a numerical method

The object of this study is to analyze the characteristics of vortex-induced vibration of a slender marine structure with the numerical method. Applying a dynamic analysis method for a slender marine structure based on the 3D finite difference method, we carried out case studies for a tensioned beam model at a constant flow speed. The hydrodynamic forces, in the direction of inline and cross-flow, created by vortex shedding are simultaneously considered based on Morison equation. The frequency of force in the inline direction corresponding to the unstable zone is evaluated. An eigenvalue analysis for different flow speeds of a tensioned beam considering the effect of the tension increase due to the inline and cross-flow drag forces is performed. We found that a revision of the eigenvalue should be considered if the tension along a riser or beam is significantly affected by an environmental or functional load. From a trajectory on the XY plane it was shown that the riser did not move in an exact 8 shape for all flow conditions due to the phase angle difference between inline and cross-flow displacement. It is believed that the phase angles between inline and cross-flow displacements in high modes are different among the nodes.     

Comparison of driving characteristics between drivers in Korea and in the united states of America based on driver-vehicle interaction field database

Research and development involving intelligent vehicles of today is geared to safe, driver-friendly and sensitive vehicles that provide a driver with a pleasant and convenient driving environment while preventing him or her from possible risks of accident. In developing convenient and safe vehicles, research on drivers’ driving patterns, reactions and state characteristics depending on road conditions in actual field is essential in order to devise more driver-friendly intelligent vehicles. This paper describes how a driver-vehicle interaction (DVI) field database is built in order to obtain a driver’s input in normal road driving condition on highways, country roads, and city roads, and his or her state information, as well as data on the vehicle and traffic conditions. And the newly built database is compared with the RDCW FOT database established by UMTRI of the US for analysis to suggest that the driving tendencies of drivers in Korea and the road driving conditions are not the same as those in the US, reconfirming the need to establish a DVI field database, which will be used for the development of intelligent vehicles suitable for the Korean environment. The DVI data collected from actual driving in field are anticipated to be widely utilized as basic data for research on various intelligent driving safety systems, advanced driver assistance systems (ADAS) and human-vehicle interface (HVI) that are suitable for the driving environment in Korea.     

Enhanced selective forwarding scheme for alert message propagation in vehicular <Emphasis Type="Italic">ad hoc</Emphasis> networks

Vehicle-based applications were recently introduced to improve traffic safety and efficiency. These applications are classified into either safety-oriented or non-safety-oriented applications. Safety-oriented applications are typically provided by means of vehicle-to-vehicle (V2V) communications to support reliable and fast alert message propagation to all surrounding vehicles when an emergency occurs on the road. In vehicular ad-hoc network (VANET) broadcast-based packet forwarding is typically preferred for the propagation of urgent traffic-related information to all reachable nodes within a specified dangerous region. However, this approach may cause broadcast storm problems, which can lead to serious contention between transmissions from adjacent nodes. In this paper, we propose an alert message propagation scheme that is based on selective forwarding and aims to i) minimize the number of rebroadcasting nodes and ii) guarantee reliable and fast alert message delivery to all reachable nodes. Our scheme was evaluated using two different highway scenarios. The simulation results demonstrated that the performance of the proposed scheme was better than that of existing broadcast schemes in terms of the message delivery latency, the message delivery ratio, and the message rebroadcasting ratio.     

Optimization of blending oil with non-esterified biodiesel fuel using design of experiment at partial engine loads

Non-esterified bio-diesel fuel is more economically feasible than esterified one because of simple manufacturing process that only consists of filtering. Applicability of this fuel on diesel engine with electronic control system was tried and accomplished in a previous research. In this study, optimization adopting a fractional factorial design and response surface methodology was carried out at 25 % and 50 % of engine load in order to verify effectiveness of design of experiment for performance optimization of diesel engine. Pcr and IT mainly affected responses as specific fuel oil consumption and nitrogen oxides regardless of engine load according to the fractional factorial design. Estimations were 310.3 g/kWh of specific fuel oil consumption and 237 ppm of nitrogen oxides at 25 % load, and 233.2 g/kWh of specific fuel oil consumption and 730 ppm of nitrogen oxides at 50 % load according to the response surface methodology. As the results of verification tests, specific fuel oil consumption and NOx were respectively 300.4 g/kWh and 277 ppm at 25 % load, and 236.8 g/kWh and 573 ppm at 50 % load. Since there were small differences between estimations and verifications, adopting Box-Behnken method of the response surface methodology for performance optimization of diesel engine should be considered carefully.     

GROWTH DIFFERENTIATION FACTOR-5 STIMULATES THE GROWTH AND ANABOLIC METABOLISM OF ARTICULAR CHONDROCYTES

Growthdifferentiationfactor5(GDF5),also knownascartilage derivedmorphogeneticprotein1(CDMP1),isamemberofthebonemorphogenet icprotein(BMP)familywhichbelongstothe transforminggrowthfactorβ(TGFβ)superfami ly[1].GDF5isarelativelynewmemberofthe BMPfamily.LikeotherBMPs,implantationofre combinantGDF5caninduceectopiccartilagefor mationinmusculartissues.Thephysiologicalrole ofGDF5hasbeenreportedincludingregulationof myogenesis,regulationofchondrogenesis,bone morphogenesis,andneurondifferen…     

Development of evolutionary cone type LSD for SUV/RV utilizing the axiomatic approach and the ultrasonic nano crystal surface modification technology

Surface topology, cone angle and the forces acting on the cone of the clutch type limited slip differential (LSD) are major design parameters for the bias ratio and the noise condition. Therefore much research has been dedicated to these developments but the results have been used to submit patents. A new cone type limited slip differential for sport utility vehicles and recreational vehicles, which has a very simple structure and easy compliance with the vehicle performance, has been developed by the axiomatic approach and the ultrasonic nano crystal surface modification (UNSM) technology. The design criteria and optimal value of the design parameters are determined by the axiomatic approach utilizing CAE tools. Test methodologies in a test rig and in a vehicle were also developed. Test results showed good performance of bias ratio and noise level but durability is still under testing. This study is an extension of F2006P266, FISITA 2006.     

Sensor fusion-based lane detection for LKS+ACC system

This paper discusses the market trends and advantages of a safety system integrating LKS (Lane Keeping System) and ACC (Adaptive Cruise Control), referred to as the LKS+ACC system, and proposes a method utilizing the range data from ACC for the sake of lane detection. The overall structure of lane detection is the same as the conventional method using monocular vision: EDF (Edge Distribution Function)-based initialization, sub-ROI (Region Of Interest) for left/right and distance-based layers, steerable filter-based feature extraction, and model fitting in each sub-ROI. The proposed method adds only the system for confining lane detection ROI to free space that is established by range data. Experimental results indicate that such a simple adaptive ROI can overcome occlusion of lane markings and disturbance of neighboring vehicles.     

Model based burnt gas fraction controller design of diesel engine with VGT/Dual loop EGR system

-Recently, regulation of NOx and PM emission in diesel engines has become stricter and the EGR system has been expanded into a dual loop EGR system to increase EGR rate as well as to utilize exhaust gas strategically. In terms of engine combustion characteristics, burnt gas fraction is becoming an important factor of solving the NOx and PM emission reduction problem more efficiently but conventional controller focused only pressure and air flow rate targets. Unlike the previous studies, this paper describes a model based burnt gas fraction control structure for a diesel engine with a dual loop EGR and a turbocharger. Feedforward control inputs based on burnt gas fraction states aids in the precise control of diesel engines, especially in transient states by considering coupled behavior within the system. For the controller validation, a control oriented reduced order model of a diesel engine air management system is established to simplify the control input computation and its stability is proved by analysing the internal dynamics stability. Then, a sliding mode controller is designed and controller robustness at certain operating points is validated using an HiLS bench.     

Assessment of the transit ridership prediction errors using AVL/APC data

Transportation - The disparity between actual and forecasted transit ridership has been an important area of study and a concern for researchers for several decades. In order to decrease the...