Enhancement of NOx-PM trade-off in a diesel engine adopting bio-ethanol and EGR

For realizing a premixed charge compression ignition (PCCI) engine, the effects of bio-ethanol blend oil and exhaust gas recirculation (EGR) on PM-NOx trade-off have been investigated in a single cylinder direct injection diesel engine with the compression ratio of 17.8. In the present experiment, the ethanol blend ratio and the EGR ratio were varied focusing on ignition delay, premixed combustion, diffusive combustion, smoke, NOx and the thermal efficiency. Very low levels of 1.5 [g/kWh] NOx and 0.02 [g/kWh] PM, which is close to the 2009 emission standards imposed on heavy duty diesel engines in Japan, were achieved without deterioration of the thermal efficiency in the PCCI engine operated with the 50% ethanol blend fuel and the EGR ratio of 0.2. It is found that this improvement can be achieved by formation of the premixed charge condition resulting from a longer ignition delay. A marked increase in ignition delay is due to blending ethanol with low cetane number and large latent heat, and due to lowering in-cylinder gas temperature on compression stroke based on the EGR. It is noticed that smoke can be reduced even by increasing the EGR ratio under a highly premixed condition.     

Measurement of soot oxidation with No<Subscript>2</Subscript>-O<Subscript>2</Subscript>-H<Subscript>2</Subscript>O in a flow reactor simulating diesel engine DPF

Understanding the mechanism of carbon oxidation is important for the successful modeling of diesel particulate filter regeneration. Characteristics of soot oxidation were investigated with carbon black (Printex-U). A flow reactor system that could simulate the condition of a diesel particulate filter and diesel exhaust gas was designed. Kinetic constants were derived and the reaction mechanisms were proposed using the experimental results and a simple reaction scheme, which approximated the overall oxidation process in TPO as well as CTO. From the experiments, the apparent activation energy for carbon oxidation with NO₂-O₂-H₂O was determined to be 40±2 kJ/mol, with the first order of carbon in the range of 10∼90% oxidation and a temperature range of 250∼500°C. This value was exceedingly lower than the activation energy of NO₂-O₂ oxidation, which was 60±3 kJ/mol. When NO₂ exists with O₂ and H₂O, the reaction rate increases in proportion to NO₂. It increases nonlinearly with O₂ or H₂O concentration when the other two oxidants are fixed.     

Demonstration of vehicular visible light communication based on LED headlamp

With the emergence of LED lighting, IT convergence technology using the visible spectrum of LEDs, such as Visible Light Communication (VLC), has been highlighted. Among the many VLC applications, vehicular VLCs based on LED headlamps and transportation lighting infrastructure, such as street lamps, traffic lights, etc., are considered good alternatives for Intelligent Transportation Systems (ITS) or Active Safety applications. This paper introduces a demonstration system of vehicle-to-vehicle (V2V) VLC based on LED headlamps. By applying an inverse 4-PPM modulation scheme satisfying a 75 % dimming level under the light distribution regulation of LED headlamp, the proposed system showed its capability for V2V VLC with a 10 kbps data rate for more than 30 m under day time conditions. By measuring the BER performance according to distance, outdoor V2V VLC was possible for more than 30 m even in the day time.     

Laboratory alignment procedure for improving reproducibility of tyre wet grip measurement

Since 2012, the Korean and EU governments have been running a tyre labelling system. All tyres sold in Korea have to carry a label that displays information of two performance criteria: rolling resistance and wet grip. The rolling resistance of the tyres determines their fuel efficiency grading, and the wet grip of the tyres determines their braking safety grading. The rolling resistance and wet grip measurements must be reproducible, so the same tests on the same tyres in different laboratories must produce the same results to ensure a fair comparison between tyres from different suppliers. In addition, a good reproducibility of testing results prevents market surveillance authorities from obtaining results different from those provided by suppliers when testing the same tyres. The laboratory alignment procedure for the rolling resistance measurements was developed and published as the EU Commission Regulation No. 1235 in 2011. However, the laboratory alignment procedure for the wet grip measurements has not yet been developed. Therefore, there are many differences in the wet grip test results among test laboratories throughout the world. The new procedure that is proposed for the wet grip measurement alignment for tyre testing laboratories can improve the reproducibility of the wet grip testing results, and five laboratory alignment tests were carried out between KATECH and five other test laboratories in the world to evaluate the results of the proposed procedure.     

Numerical Study for Brake Squeal by Machining Patterns on Frictional Surface

Automotive brake noise has become a stubborn problem as automotive cars achieve higher driving torques, since that the increased torque induces the generation of severe noise dissipation during brake operation. Moreover, the global brake tuning market for achieving higher performance of the vehicle has expanded recently. The need to control the noise grows more in this connection. The tuning brake kits have employed cross-drilled and slotted machining pattern on the surface of the rotor. These designs have advantages to improve air ventilation, temperature control, and surface cleaning of brake pad. However, the effects of modal frequency by patterned rotor surfaces are rarely discussed, even if it is highly related with brake squeal phenomenon. Therefore, this study deals with the relationship between patterned surfaces and brake squeal through the numerical methods. The commercial software of a finite element analysis is employed for calculation by varying geometric design factors of each rotor pattern. As a result, the cross-drilled machining patterns are concluded to be an influential factor for in-plane mode frequency while the slotted patterns have more leverage for out-of-plane mode frequency.