大跨高墩预应力混凝土箱梁悬臂灌注快速施工技术

较详细地介绍了绵羊沟特大桥大跨度预应力混凝土箱梁悬臂浇筑施工技术。     

富水砂卵石地层盾构换刀方案

成都地铁1号线盾构隧道工程主要穿越地层为砂卵石地层,砂卵石对盾构机的刀具磨损较为严重,为保证盾构掘进的正常进行,需要频繁更换刀具。通过对成都地铁1号线施工中的几种盾构换刀方案进行比较,提出了富水砂卵石地质情况施工中合理换刀方案。     

高速铁路振动荷载作用下的土体动力响应及对下穿地铁隧道的影响分析

利用动力响应分析原理,通过有限元分析程序模拟某高速铁路现场条件,得出结构体的位移、速度及加速度时程曲线.通过对特征点的位移、速度及加速度的变化情况分析,评价在该高速铁路路基下修建下穿地铁隧道的可行性,得出下穿地铁隧道对该高速铁路后期运营的影响不大,可以满足各项指标要求;其主要的风险是施工期间的工程安全.     

Target priority determination methods by interval-valued intuitionistic fuzzy sets with unknown attribute weights

The paper aims at the problem of multi-targets threat degree being hard to be evaluated accurately in complex air defense battlefield environments. Combined with multi-sensors information fusion and interval-valued intuitionistic fuzzy sets (IVIFS) theories, the target priority determination is studied. The score and accuracy functions of IVIFS are improved with thinking about the hesitating information in order to increase the rationality. Then, the influence factors of target priority and the nonlinear relationship between the influence factors and target priority are analyzed. Next, the algorithms for calculating the factor weights and sensor weights are given. Based on the theory of IVIFS and technique for order preference by similarity to an ideal solution (TOPSIS), two methods of target priority determination based on the IVIFS and TOPSIS are proposed. At last, an application example verifies the effectiveness and flexibility of the proposed algorithms.     

基于物元分析法的公路桥梁损伤等级评定研究

在构建桥梁损伤等级评定指标体系的基础上，采用 AHP确定了各指标的权重，运用物元分析的方法建立了桥梁损伤等级评定的数学模型，并利用模型评定结果，得到了某桥梁的损伤等级。     

乾元公司铁路专用线场站模式探讨

目前,传统的铁路专用线建设模式是铁路专用线自接轨站接轨,通过区间正线引入厂区的建设模式,这种模式的区间正线受地形条件、厂区位置和沿线规划影响较大,这些影响将不可避免地导致铁路专用线建设工程投资的增加,如能根据运输性质考虑缩短区间正线长度,在接轨站旁边设装车作业站,将大大减少专用线工程投资.以乾元公司铁路专用线建设模式为例来研究铁路专用线场站模式,就如何在接轨站旁边设装车作业站,实现接轨站设备与铁路专用线共用进行探讨.     

Apoptin原核表达载体的构建及在大肠杆菌中的表达

目的构建Apoptin的原核表达载体,并制备抗原物质Apoptin融合蛋白。方法在获得Apoptin融合基因的基础上,成功构建了Apoptin的高效原核表达载体pET-28a( )-Apoptin,将该质粒转化至大肠杆菌E.coliBL21(DE3)受体菌中,以IPTG对其进行诱导表达,聚丙烯酰胺凝胶电泳分析目的蛋白。结果转化有Apoptin的原核表达载体pET-28a( )-Apoptin的大肠杆菌E.coliBL21(DE3)经IPTG诱导后,经SDS-PAGE分析,在相对分子质量约17 000的位置出现目的蛋白条带,大小与Apoptin融合蛋白一致。结论Apoptin原核表达载体pET-28a( )-Apoptin能够表达出Apoptin融合蛋白,为进一步的Apoptin研究和制备Apoptin抗体奠定了基础。     

用经济学的观点看集运企业发展Extranet的必要性

1Extranet简介 　　Extranet是Internet的一种应用,是将Internet的构建技术应用于企业间的系统.它是企业与其客户和其他企业相连来完成其共同目标的交互式网络,通过向一些主要的贸易伙伴添加外部链接来扩充内联网,这些贸易伙伴不限于原有组织的成员,可超出组织之外,特别是包括那些想与之建立联系的供应商和客户. 　　……     

Property Evolution of Sulphoaluminate Grouting Material under Pressure Circulation北大核心CSCD

Water-sealed underground oil tank projects are quite different from traditional underground projects since the water-sealing conditions are very strict and the difficulties caused by the geological specificity, structural specificity and construction specificity are key factors affecting the project. In light of the significant early initial setting time and rapid temperature increase of sulphoaluminate cement-based grouting material for a large domestic water-sealed underground oil tank with pressurized cyclic grouting, a laboratory grouting simulation is conducted. It is found that the properties of the sulphoaluminate cement-based grouting material are quite different under different pressure cycles, the hydration exothermic peak time gets shorter with an increase of circulation time, the compressive strength decreases with an increase of circulation time, and the longer the circulation time the more obvious the de-crease of compressive strength. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.