Vehicle interior noise model based on a power law

Identifying the components of a vehicle’s interior noise is important in many phases of the noise, vibration, and harshness (NVH) development process. Many test methods that have been widely used in the automobile industry to separate noise sources are based on system identification methods in the frequency domain. However, none of the frequency response function-based methods can directly estimate the wind noise component. In this article, an analytical model for the interior noise level based on a simple power law was developed. It was assumed that the mean squared acoustic pressure for the interior noise could be obtained by summing up those of the wind noise, road noise, and background noise. The wind noise and road noise were further assumed to depend only on wind speed and the vehicle’s driving speed, respectively, and to follow a simple power law. The resulting analytical model includes five parameters that can be optimized for the vehicle and the road. The validity of the model was verified by using data obtained from cruise tests performed on a proving ground for cruise speeds ranging from 40 km/h to 130 km/h. The model is applied to the overall and 1/3-octave bands of interior noise and is shown to describe the data trends fairly well. For the test vehicle used in the present work, the overall mean squared pressures for the wind and road noise components are shown to be proportional to the wind speed to the 5.8 power and to the driving speed to the 3.4 power, respectively.     

Parameter identification for a LuGre model based on steady-state tire conditions

The purpose of this study was to effectively identify parameters for a LuGre friction model based on experimental measures. In earlier work related to this study (Yang et al., 2009), which was based on the characters of polygonal wear (Sueoka and Ryu, 1997), we showed a frictional vibration model for a mass on a moving belt. This model reflected lateral vibrations caused by velocity and toe-in angle. An important aspect of the present study is the improved friction model. A previous friction model, which divided the process into four parts, expressed the sable excited vibration well but failed to reflect the hysteresis loop change when vehicles accelerated or decelerated continuously. A LuGre friction model can solve this problem, but several model parameters must be obtained experimentally. We measured contact width and length of tires as vertical pressure changed; this provided a theoretical basis for apparent stiffness of a unit of tire tread. Based on tire data from Bakker E’s article in a SAE paper from 1987, we identified the Stribeck exponent and Stribeck velocity in LuGre. Then, the results were implemented in a vibration system that verified the rationality of the data.     

ALSTOM的双层电动车和配套的质量程序

瑞典国家铁路公司(SJ AB)为斯德哥尔摩大区间运输向ALSTOM订购了113辆CORADIA双层电动车.文章介绍了开发该动车的总体技术规定以及方便客户操作的制造规范和详细规定.瑞典冬季的最低温度达-40℃,这对制造和质量提出了高要求.特别提到了针对设计阶段配套的质量程序.     

Computer Vision and Highway Automation

A survey is given on the development of machine vision for road vehicle guidance. Through early work in real-time simulation with real hardware in the loop at UBM, and through the EUREKA-project 'Prometheus' from 1987 to 1994 following the 100 th anniversary of road vehicle developments since 1886, Europe has pioneered the field. Since first fully autonomous testdrives in 1986, and first participation in public traffic in 1992, considerable progress has been achieved. With continuous growth in computing power of microprocessors at a rate of about one order of magnitude every four to five years, sufficient performance levels for dynamic machine vision will be available within one or two decades. The principles of dynamic vision as developed at UBM and performance levels achieved are discussed.     

Effect of handling characteristics on minimum time cornering with torque vectoring

In this paper, the effect of both passive and actively-modified vehicle handling characteristics on minimum time manoeuvring for vehicles with 4-wheel torque vectoring (TV) capability is studied. First, a baseline optimal TV strategy is sought, independent of any causal control law. An optimal control problem (OCP) is initially formulated considering 4 independent wheel torque inputs, together with the steering angle rate, as the control variables. Using this formulation, the performance benefit using TV against an electric drive train with a fixed torque distribution, is demonstrated. The sensitivity of TV-controlled manoeuvre time to the passive understeer gradient of the vehicle is then studied. A second formulation of the OCP is introduced where a closed-loop TV controller is incorporated into the system dynamics of the OCP. This formulation allows the effect of actively modifying a vehicle's handling characteristic via TV on its minimum time cornering performance of the vehicle to be assessed. In particular, the effect of the target understeer gradient as the key tuning parameter of the literature-standard steady-state linear single-track model yaw rate reference is analysed.     

The delimitation of exclusive economic zones

In this paper Admiral Kapoor examines some of the problems relating to the delimitation of maritime boundaries, particularly that of exclusive economic zones, as they affect the hydrographic surveyor.     

Management of coastal eutrophication: Integration of field data, ecosystem-scale simulations and screening models

A hybrid approach for eutrophication assessment in estuarine and coastal ecosystems is presented. The ASSETS screening model (http://www.eutro.org) classifies eutrophication status into five classes: High (better), Good, Moderate, Poor and Bad (worse). This model was applied to a dataset from a shallow coastal barrier island system in southwest Europe (Ria Formosa), with a resulting score of Good. A detailed dynamic model was developed for this ecosystem, and the outputs were used to drive the screening model. Four scenarios were run on the research model: pristine, standard (simulates present loading), half and double the current nutrient loading. The Ria Formosa has a short water residence time and eutrophication symptoms are not apparent in the water column. However, benthic symptoms are expressed as excessive macroalgal growth and strong dissolved oxygen fluctuations in the tide pools. The standard simulation results showed an ASSETS grade identical to the field data application. The application of the screening model to the other scenario outputs showed the responsiveness of ASSETS to changes in pressure, state and response, scoring a grade of High under pristine conditions, Good for half the standard scenario and Moderate for double the present loadings. The use of this hybrid approach allows managers to test the outcome of measures against a set of well-defined metrics for the evaluation of state. It additionally provides a way of testing and improving the pressure component of ASSETS. Sensitivity analysis revealed that sub-sampling the output of the research model at a monthly scale, typical for the acquisition of field data, may significantly affect the outcome of the screening model, by overlooking extreme events such as occasional night-time anoxia in tide pools.     

Short sea shipping: a Canadian perspective

Short sea shipping has begun to receive attention from governments worldwide, as they seek to reduce traffic congestion and greenhouse gases. Despite a long coastline and its interest in international maritime affairs, the Canadian government had, until 2003, placed greater emphasis on resolving the issues of other transport modes. In July 2003, Canada and the United States signed a Memorandum of Cooperation on Sharing Short Sea Shipping Information and Experience. Subsequently, the federal government embarked on an assessment of short sea shipping through a series of workshops. This paper explores the key issues with respect to further development of short sea shipping from a Canadian perspective. It examines the critical limitations and impediments to further growth of short sea services in Canada and trans-border trade with the USA, and identifies a number of questions Canadian policymakers need to answer.