Isotopic composition of carbon and nitrogen of suprabenthic fauna in the NW Balearic Islands (western Mediterranean)

Stable isotope (δ¹³C and δ¹⁵N) analyses were performed on suprabenthic fauna collected in the western Mediterranean (NW Balearic Islands), at depths ranging between 350 and 780 m. Samples were collected seasonally at bi-monthly intervals during six cruises performed between August 2003 and June 2004, using a Macer-GIROQ suprabenthic sledge (0.5 mm mesh size). Twenty-four separate species (5 mysids, 12 amphipods, 2 cumaceans, 2 isopods, 1 euphausiid, 1 decapod and 1 fish) and bulk copepods were analyzed on a seasonal basis for stable carbon and nitrogen isotopes. Stable nitrogen isotope ratios (δ¹⁵N) ranged from 2.3‰ (the amphipod Lepechinella manco in September 2003) to 13.0‰ (the amphipod Rhachotropis caeca in August 2003). δ¹³C values ranged from − 24.2 (the cumacean Campylaspis sulcata in June 2004) to − 16.1 (the amphipod Bruzelia typica in November 2006). Both δ¹³C and δ¹⁵N values suggest that there are three trophic levels within the suprabenthic community. However, considering the bathymetric range of the species, the results suggest that the deepest assemblage supported only two trophic levels. The stable isotope ratios of suprabenthic fauna displayed a continuum of values and confirmed a wide spectrum of feeding types (from filter-feeders to predators). In general, and in spite of the poor knowledge about diets available for most suprabenthic species, higher δ¹⁵N were found for carnivorous amphipods (e.g. Rhachotropis spp., Nicippe tumida) consuming copepods. Low overlap for δ¹³C and δ¹⁵N values was observed, though δ¹⁵N values where less variable than δ¹³C, which suggests high resource partitioning in this assemblage. Seasonal variations in isotopic composition for both δ¹³C and δ¹⁵N were low (less than 1‰ and 3‰, respectively) and variable depending on species. Low correlations between δ¹³C and δ¹⁵N of suprabenthic fauna were found for all periods studied, though increasing from February 2004 to June 2004 (after the main peak of primary production in surface). C:N ratio (indicator of lipid content) showed higher values in summer than in winter. This suggests that lipid content may explain the seasonal patterns of δ¹³C variability and, due to the increase of storage products in phytoplankton and zooplankton, it possibly indicates the peak of primary production at the surface.     

基于模糊预测的装备任务成功性评估

建立了基于因果聚类的模糊预测模型和装备任务成功性评估模型.结合装备以往使用、检测数据以及现有装备状态信息,利用模糊预测理论对相关功能单元未来任务可靠性进行了预测.将装备分为可修部分和不可修部分,分别进行了任务成功性评估,从而实现了装备任务成功性评估.最后举例说明了该方法在装甲装备任务成功性评估过程中的应用.     

Adaptability and vulnerability of zooplankton species in the adjacent regions of the Black and Marmara Seas

During 2005–2008 species composition, abundance patterns, natural mortality rates and salinity effects on zooplankton were studied in the Bosphorus regions of the Black and Marmara Seas. The tendencies to diminish for abundance and biomass of the Black Sea originated zooplankton species and to increase for the proportion of their carcasses in the direction from the Black Sea toward the Marmara Sea were found. The mortality in the Black Sea species increased with depth in the Marmara Sea. The contribution of organic matter of carcasses of the Black Sea originated organisms to bacterial processes in the deep strata of the Marmara Sea was estimated. Different salinity and temperature regimes restrict mutual penetration of the species in these seas.     

梅赛德斯-奔驰全新一代E级轿车

更安全 更舒适 更环保 犹如宝马3系之于入门级豪华车,在中大型车这一细分市场．奔驰E级轿车是当之无愧的标杆,无需赘言,超过1200万辆的历史总销量就是最好的佐证。2009年,我们迎来了仿佛从2046年穿越时空回来的全新一代E级轿车,其智能程度之高让人咋舌,通过一系列独特的驾驶辅助功能．提升了安全性。     

Influence of injection parameters on the transition from PCCI combustion to diffusion combustion in a small-bore HSDI diesel engine

In this paper, the influence of injection parameters on the transition from Premixed Charge Combustion Ignition (PCCI) combustion to conventional diesel combustion was investigated in an optically accessible High-Speed Direct-Injection (HSDI) diesel engine using multiple injection strategies. The heat release characteristics were analyzed using incylinder pressure for different operating conditions. The whole cycle combustion process was visualized with a high-speed video camera by simultaneously capturing the natural flame luminosity from both the bottom of the optical piston and the side window, showing the three dimensional combustion structure within the combustion chamber. Eight operating conditions were selected to address the influences of injection pressure, injection timing, and fuel quantity of the first injection on the development of second injection combustion. For some cases with early first injection timing and a small fuel quantity, no liquid fuel is found when luminous flame points appear, which shows that premixed combustion occurs for these cases. However, with the increase of first injection fuel quantity and retardation of the first injection timing, the combustion mode transitions from PCCI combustion to diffusion flame combustion, with liquid fuel being injected into the hot flame. The observed combustion phenomena are mainly determined by the ambient temperature and pressure at the start of the second injection event. The start-of-injection ambient conditions are greatly influenced by the first injection timing, fuel quantity, and injection pressure. Small fuel quantity and early injection timing of the first injection event and high injection pressure are preferable for low sooting combustion.     

Reducing pedestrian exposure to environmental pollutants: A combined noise exposure and air quality analysis approach

This study offers a combined analysis of pedestrian exposure to noise and air pollution within a specific urban setting in Dublin, Ireland. The impact of a recent boardwalk development on reducing pedestrian exposure to air and noise pollution is examined while modelling experiments are undertaken to explore the possibility of achieving further reductions in pollutant exposure through better urban design and planning. The results show that the boardwalk has reduced pedestrian exposure to air and noise pollution and that further reductions may be achieved by more strict segregation of pedestrian and road traffic in urban areas.     

Measurement of ocean temperatures using instruments carried by Antarctic fur seals

The study aimed to test the utility of instruments deployed on marine mammals for measuring physical oceanographic variation and, using this method, to examine temperature variation in the coastal waters around South Georgia. There was a significant correlation between temperature measurements made using a towed undulating oceanographic recorder (UOR) and concurrent measurements from time-depth recorders (TDRs) fitted to lactating Antarctic fur seals foraging from the coast of South Georgia. Congruence was found at horizontal spatial scales from 0.01°×0.01° to 0.5°×0.5° (degrees of latitude and longitude), and at a vertical scale of 10 m. However, there was no significant correlation between temperature measured by TDRs in the top 5 m and sea surface temperature (SST) measured by satellite remote sensing. TDR data provided information about temperature variation vertically through the water column, and through time. The UOR data were used to recalibrate the TDR data in order to correct for the slow response time of the TDR thermistor relative to the speed of seal movements through the water column. Seasonal temperature variation was apparent, and temperatures also varied between regions, and with bathymetry. These results were consistent with the current interpretation of the coastal oceanography around South Georgia. In particular, the relationship between on- and off-shelf waters showed larger amounts of warmer surface water in a region in which more run-off was to be expected. The study also showed that Antarctic fur seals concentrate their activity in regions of colder, and presumably oceanic, water. Such instrumented animals could provide near real time data for assimilation into ocean models.     

Corrosion analysis of bulk carriers, Part I: operational parameters influencing corrosion rates

This paper considers the physical processes of corrosion that occur in bulk carriers. Three main types of corrosive environments are identified within a bulk carrier, namely, immersion in seawater, exposure to an enclosed atmosphere, and exposure to porous media. Fundamental variables influencing corrosion in each environment of the cargo hold region, ballast tanks and void spaces are identified. These serve to identify operational parameters that affect bulk carrier corrosion. It is proposed that such parameters can be used to obtain corrosion rate databases representative of vessel operation.     

Corrosion of working chains continuously immersed in seawater

Chains used in the offshore industry typically are exposed to continued high rates of corrosion, in part due to the working of the chain not permitting a build up of protective rusts. Herein, a procedure is described for estimating the corrosion loss of low-alloy steel chain under continued immersion corrosion conditions. The procedure is based on extensive recent investigations of the effects of water temperature, salinity, water velocity, and surface roughness on steel corrosion under field conditions. Since the working of the chain does not allow corrosion products (rust) to build up on the critical contact surfaces, erosion due to wear and abrasion can be estimated separately. Two example applications are given.     

旭光大桥的加固改造研究

双曲拱桥是一种具有民族特色的拱桥型式,至今为止,在役的双曲拱桥营运时间约有30～40年的历史,双曲拱桥的加固改造已是迫在眉睫。通过旭光大桥的病害特点和原因进行分析,阐述了其加固改造的具体措施,材料要求,施工工艺等。实践证明：此法具有施工简单,速度快,质量好,造价低的优点,说明该桥的加固改造是成功的。