2006年铁道养路机械展销会成果介绍

在卡卢加举行的第12届"2006年铁道线路机械"例行国际专业展销会上,100多家俄罗斯及世界各国的企业和组织展示出了在铁路轨道技术装备方面最新的研发成果。展览会用实物反映了在铁道线路运营方面的2个重要的发展方向,一是利用功能更多的机械采用先进的养路作业工艺;二是线路整体在科学技术进步方面有了进一步的发展。展览会向参加者和各方来宾介绍了各种现代化的高生产率机械、检查设备和线路诊断设备、机械化的工具、高效的技术研发成果等。     

谐波对牵引变压器损耗的影响

根据一个牵引变压器的损耗,提出了谐波对绕组电阻的影响.对同心式和饼式线圈的变压器进行了分析.使用二维有限元计算软件"Flux2D"进行了多种仿真,并且将其结果与实际变压器测量值进行对比,提出一个简单的定律,由此可确定2种不同类型变压器电阻随频率的变化规律.     

Sail–sail and sail–hull interaction effects of hybrid-sail assisted bulk carrier

In a previously reported study, wind tunnel experiments were undertaken to investigate the aerodynamic characteristics of hybrid-sails in isolation. Such sails are seen as providing a worthwhile reduction in the delivered power to the propeller and hence the engine generated thrust, with a corresponding reduction in the CO₂ production of diesel engine exhaust. In this paper, wind tunnel testing is used to investigate sail–sail interaction effects for two sets of four identical hybrid-sails, and the sail–hull interaction effects for the same two sets of four identical sails in the presence of a bulk carrier hullform. The analysis presented suggests that to build a sail-assisted ship requires an appreciation of the sail–sail and sail–hull interaction effects.     

A reduced-gravity model of the Catalan Sea

A reduced-gravity model is used to study the effects of the wind on the upper layer circulation in the Catalan Sea. The model parameters were set by observed features of the circulation in the basin. It is shown that the results are particularly sensitive to the open sea boundary conditions. Simulations were done using the following boundary fluxes: (i) mean values estimated by Bethoux (1980) and (ii) more recent geostrophic transports computed from hydrographic data by Font et al. (1988). The latter seem to lead to more realistic circulation patterns. The influence of seasonal winds (climatological data) on the dynamics is clear, especially during the winter.     

Simulation Approach to the Effect of the Ratio Changing Speed of a Metal V-Belt CVT on the Vehicle Response

In regard to the belt and pulley system of a metal V-belt CVT, the characteristics of the ratio changing speed is obtained by experiments. It is summarized in a practical and simple experimental equation. By using this equation a simulation model is developed to analyze the response of a vehicle with a metal V-belt CVT to a rapid pulley ratio change. The simulation results are in reasonable agreements with experimental results.     

Generation of cyclonic eddies in the Eastern Gotland Basin of the Baltic Sea following dense water inflows: numerical experiments

A sigma (σ)-coordinate ocean model by Blumberg and Mellor (POM) is applied to study the formation processes of mesoscale cyclones observed in the Eastern Gotland Basin following the dense water inflows. The initial conditions simulate a situation when the Arkona and Bornholm basins and partially the Slupsk Furrow are already filled with the inflow water of the North Sea origin, while the Eastern Gotland and Gdansk basins still contain the old water of pre-inflow stratification. Model runs with constant and time-dependent winds, changing the buoyancy forcing, grid geometry and bottom topography display the following. Entering the Eastern Gotland Basin from the Slupsk Furrow, the bottom intrusion of saline inflow water splits in two: one goes northeast towards the Gotland Deep, and second moves southeast towards the Gulf of Gdansk. An intensive mesoscale cyclonic eddy carrying the inflow water is generated just east of the Slupsk Furrow with the inflow pulse. A number of smaller cyclones with boluses of the inflow water are formed in the permanent halocline along the saline intrusion pathway to the Gotland Deep. Following Spall and Price [J. Phys. Oceanogr. 28 (1998) 1598], the cyclones are suggested to form by the adjustment of the high potential vorticity inflow water column to a low potential vorticity environment.     

新一代车辆标准化的综合性和前瞻性

俄罗斯正在研制新一代车辆并进行车辆检修制度的改革。本文提出标准化工作的前瞻性和综合性,要求车辆与其部件具有等寿命、装卸和调车机械应适应车辆的性能等,这样在铁路行业就会产生巨大的经济效益。     

Sediment geochemistry and mineralogy in Milos bay, SW Kyklades, Aegean Sea, Greece

This work aims at studying the geochemistry and mineralogy of Milos bay surface sediments. The bay forms an enclosed marine area, supplied totally by volcanic formations. Totally 16 samples were subjected to sedimentological (grain size), mineralogical (microscope examination and X-ray diffraction of the bulk sample and the pelitic fraction), and geochemical analyses (X-ray fluorescence in the pelitic fraction). Also the carbonate content was determined. Sediments were sandy with a high carbonate content (14–58%). The dominant minerals recognized in the pelitic fraction were smectite, kaolinite and illite, followed by chlorite, quartz, calcite, Mg-calcite and feldspars. In general, element concentrations appeared to be within the normal range, except Pb and Zn, which exhibited relatively high values. The Index of Geoaccumulation I_geo was computed, in order to investigate a possible enrichment of the surface sediments in metals. The analysis revealed again high values of I_geo class for both Pb and Zn. A careful study of the area, in relation to the quality of the catchment basins petrology, lead to a non-anthropogenic origin of these high concentrations. The enrichment of the surface sediments in Pb and Zn is attributed to the weathering of several mineral deposits, pyroclastic rocks and lavas, covering almost all Milos vicinity. A study of the geochemical data correlation coefficient matrix revealed three major groups of elements: (i) the elements of detrital origin represented by Si, Al, K and a part of the metals; (ii) the carbonates group; and (iii) a Fe–Mn oxyhydroxides–oxides group, which attracts a part of Pb, Cr and Ni.     

Urban form,travel time,and cost relationships with tour complexity and mode choice

The primary purpose of this study was to investigate how relative associations between travel time, costs, and land use patterns where people live and work impact modal choice and trip chaining patterns in the Central Puget Sound (Seattle) region. By using a tour-based modeling framework and highly detailed land use and travel data, this study attempts to add detail on the specific land use changes necessary to address different types of travel, and to develop a comparative framework by which the relative impact of travel time and urban form changes can be assessed. A discrete choice modeling framework adjusted for demographic factors and assessed the relative effect of travel time, costs, and urban form on mode choice and trip chaining characteristics for the three tour types. The tour based modeling approach increased the ability to understand the relative contribution of urban form, time, and costs in explaining mode choice and tour complexity for home and work related travel. Urban form at residential and employment locations, and travel time and cost were significant predictors of travel choice. Travel time was the strongest predictor of mode choice while urban form the strongest predictor of the number of stops within a tour. Results show that reductions in highway travel time are associated with less transit use and walking. Land use patterns where respondents work predicted mode choice for mid day and journey to work travel.

Parametric study of the main parameters influencing the catalytic efficiency of a diesel oxidation catalyst: Parameters influencing the efficiency of a diesel catalyst

This work studies the impact of five parameters: CO and HC engine-out emissions, space velocity, average value and profile of exhaust temperature, on Diesel CO and HC tail-pipe emissions. The first part of this work is conducted on a reactor and shows that both HC and CO light-off temperature increases with CO and HC input concentration. CO and HC initial concentration influence the adsorption/desorption capacities of HC only at high temperatures. Space velocity also influences CO and HC conversion efficiency. The second part of this work studies the impact of different combinations of HC and CO engine-out emissions on CO and HC conversion and tail-pipe emissions in the case of New European Driving Cycle. This part proposes that a Diesel oxidation catalyst must be mainly studied at the Urban Part of NEDC, as the CO and HC conversions are very high at the extra-urban part of NEDC. CO and HC conversion efficiencies are also dependent on exhaust temperature and catalytic volume. In the case of two different profiles of exhaust temperature with the same average temperature, CO and HC conversion efficiency is lower in the case of the smoother profile.