Influence of long-wavelength track irregularities on the motion of a high-speed train

Vertical track irregularities over viaducts in high-speed rail systems could be possibly caused by concrete creep if pre-stressed concrete bridges are used. For bridge spans that are almost uniformly distributed, track irregularity exhibits a near-regular wave profile that excites car bodies as a high-speed train moves over the bridge system. A long-wavelength irregularity induces low-frequency excitation that may be close to the natural frequencies of the train suspension system, thereby causing significant vibration of the car body. This paper investigates the relationship between the levels of car vibration, bridge vibration, track irregularity, and the train speed. First, this study investigates the vibration levels of a high-speed train and bridge system using 3D finite-element (FE) transient dynamic analysis, before and after adjustment of vertical track irregularities by means of installing shimming plates under rail pads. The analysis models are validated by in situ measurements and on-board measurement. Parametric studies of car body vibration and bridge vibration under three different levels of track irregularity at five train speeds and over two bridge span lengths are conducted using the FE model. Finally, a discontinuous shimming pattern is proposed to avoid vehicle suspension resonance.     

充满挑战的中国汽车导航业

中国消费者导航使用频率高 根据Strategy Analytics对北美、欧洲和中国市场进行的调查,中国的驾车者对导航仪的使用最为频繁. 2011年11月StrategyAnalytics分别在西欧和美国各抽取1200名、在中国抽取2000名用户,就消费者对嵌入式导航、便携式导航及手机导航的兴趣、习惯和满意度等问题进行了调研.调研结果显示,嵌入式导航的使用频率比另两类导航更高.     

Active control strategy on a catenary–pantograph validated model

Dynamic simulation methods have become essential in the design process and control of the catenary–pantograph system, overall since high-speed trains and interoperability criteria are getting very trendy. This paper presents an original hardware-in-the-loop (HIL) strategy aimed at integrating a multicriteria active control within the catenary–pantograph dynamic interaction. The relevance of HIL control systems applied in the frame of the pantograph is undoubtedly increasing due to the recent and more demanding requirements for high-speed railway systems. Since the loss of contact between the catenary and the pantograph leads to arcing and electrical wear, and too high contact forces cause mechanical wear of both the catenary wires and the strips of the pantograph, not only prescribed but also economic and performance criteria ratify such a relevance. Different configurations of the proportional-integral-derivative (PID) controller are proposed and applied to two different plant systems. Since this paper is mainly focused on the control strategy, both plant systems are simulation models though the methodology is suitable for a laboratory bench. The strategy of control involves a multicriteria optimisation of the contact force and the consumption of the energy supplied by the control force, a genetic algorithm has been applied for this purpose. Thus, the PID controller is fitted according to these conflicting objectives and tested within a nonlinear lumped model and a nonlinear finite element model, being the last one validated against the European Standard EN 50318. Finally, certain tests have been accomplished in order to analyse the robustness of the control strategy. Particularly, the relevance or the plant simulation, the running speed and the instrumentation time delay are studied in this paper.     

编者的话

制造是汽车工业的重要环节，更是汽车业利润的重要来源之一。中国汽车工业协会助理秘书长杜芳慈日前指出：“作为制造业的汽车产业，大部分利润应该来源于制造环节。而不是汽车金融和售后服务等环节。同时，应该把5％确定为整车制造的利润率红线。低于这个比率，汽车研发、生产将很难保证。”     

Study of damaged ship motions taking into account floodwater dynamics

This paper presents an application of shallow water theory to describe the motion of floodwater inside a rolling ship in damage condition. The time domain theoretical approach to the coupled problems of ship and water inside compartment motions is briefly described, including the method used to solve for the water motion characteristics and forces exerted on the ship. This approach is applied to the study of the behaviour of a passenger Ro–Ro ship in regular beam seas and numerical results are given for the intact and damaged conditions. Comparison is made with experimental results. For the damaged condition, the characteristics of the floodwater motion are studied in the time domain for a number of different wave frequencies. The shape of the free-surface and phase of water motion in relation to the ship roll motion are shown for several wave frequencies. The dynamic floodwater roll moment is also shown and compared with the static roll moment (flat horizontal free surface), allowing the conclusion that the dynamic roll moment is much larger than the static roll moment, for high wave frequencies, and is in phase opposition in relation to the roll motion.     

Assessing methods for comparing emissions from gasoline and diesel light-duty vehicles based on microscale measurements

This paper assess whether a real-world second-by-second methodology that integrates vehicle activity and emissions rates for light-duty gasoline vehicles can be extended to diesel vehicles. Secondly it compares fuel use and emission rates between gasoline and diesel light-duty vehicles. To evaluate the methodology, real-world field data from two light-duty diesel vehicles are used. Vehicle specific power, a function of vehicle speed, acceleration, and road grade, is evaluated with respect to ability to explain variation in emissions rates. Vehicle specific power has been used previously to define activity-based modes and to quantify variation in fuel use and emission rates of gasoline vehicles taking into account idle, acceleration, cruise, and deceleration. The fuel use and emission rates for light-duty diesel vehicles can also be explained using vehicle specific power -based modes. Thus, the methodology enables direct comparisons for different vehicle fuels and technologies. Furthermore, the method can be used to estimate average fuel use and emission rates for a wide variety of driving cycles.     

编者的话

年终专稿之二:<企业资产重组中的新格局>指出,全球性金融危机不仅为国内车企提供了绝佳机会,同进也为能在此次危机中安然过渡的企业提供了机遇.     

On the convergence of Bell's logit assignment formulation

In Bell M.G.H. (1995. Transportation Research B 29, 287–295), a new logit assignment formulation was developed, which considered all possible paths in the network while still retaining the absence of a need for path enumeration. In his formulation, it presumes that the sum of a geometric series of the weights matrix always converges and hence can be computed as the inversion of a matrix. In this paper, we investigate the convergence properties of this geometric series by means of an eigensystem interpretation which states that the series converges if and only if all the eigenvalues associated with the weights matrix fall into the unit circle in a complex plane. It is found that the geometric series converges unconditionally for acyclic networks, but not necessarily does so for general networks.     

Modeling urban taxi services in road networks: Progress,problem and prospect

Traditionally, many economists have examined the models and economics of urban taxi services under various types of regulation such as entry restriction and price control in an aggregate way. Only recently have we modeled urban taxi services in a network context. A realistic method has been proposed to describe vacant and occupied taxi movements in a road network and taxi drivers' search behavior for customers. A few extensions have been made to deal with demand elasticity and congestion effects together with development of efficient solution algorithms. Calibration and validation of the network taxi service models have been conducted towards their practical applications. This paper presents an overview of the research that has been carried out by the authors to develop network equilibrium models and solution algorithms for urban taxi services, and offers perspectives for future researches.     

A review of household dynamic vehicle ownership models: holdings models versus transactions models

Among disaggregate vehicle ownership models, which model the number and/or type of vehicles owned at the household level, one can distinguish holdings models, which deal with the (optimal) household fleet at a single point in time, and transactions models. The latter type of model explains changes to the household fleet, such as replacement and disposal. The paper describes previous attempts at such dynamic models and sketches how a vehicle transactions model could look (as an example we discuss an application to The Netherlands). This includes discussions of transaction probabilities, two-stage budgeting, introducing vehicle quality in the utility functions, and the envisaged model structure and data it could use.