Mass transportation needs and financing in the United States

The U.S. Department of Transportation (1974) recently completed a comprehensive study of mass transportation needs and methods for financing these needs. Using information from the 1974 National Transportation Study, the study determined the level of capital and operating funds that would be required to implement the 1972–90 long-range plans and 1972–80 short-range programs of the states and urbanized areas. It then analyzed various funding mechanisms at state and local levels for financing their portions of these plans and programs.It was found that urban areas, in general, not only plan to stabilize transit fares in the face of rising costs, but also intend to put $ 23.6 billion into capital investments through 1980 and an additional $ 34.6 billion through 1990. Of the total $ 58.2 billion in capital expenditures by 1990, 63% would be expended by the nine largest urbanized areas; 27.8% by the New York area alone. Rail transit and commuter railroad costs would account for 90% of the nine largest urbanized areas.States and localities would be able to carry the financial burden of mass transportation improvements, even if the proposed 1980 programs were implemented in their entirety, given current levels of Federal assistance. However, there would have to be a substantial financial commitment from the states and localities and some hard decisions made by them about public expenditure priorities, fare policies, and taxation levels, and policies to discourage automobile usage. This underscores the need for careful review of their overall plans and programs by state and local officials before making financial commitments.     

A continuum model for the dispersion of traffic on two-lane roads

A continuum model for two-lane traffic flow is developed using the theory of kinematic waves in which the wavespeeds in the two lanes are assumed constant but unequal. The transient behaviour is found exactly using Riemann's method of characteristics and an asymptotic model of the long time flow is described. It is shown, that for large times, the traffic concentration moves with a weighted mean wavespeed of the two lanes and disperses about this mean speed as a result of interlane concentration differences generated by the relative wavespeeds. The dispersion can be described by a virtual coefficient of diffusion proportional to the square of the differences of the two wavespeeds and inversely proportional to the rate of lane changing. The technique is extended to describe three-lane traffic flow and to include the dependence of wavespeed upon concentration.     

An improved cyclostationary feature detection based on the selection of optimal parameter in cognitive radios

Spectrum sensing is an important part of cognitive radio systems to find spectrum hole for transmission which enables cognitive radio systems coexist with the authorized radio systems without harmful interference. In this paper, an improved cyclostationary feature detection method is proposed to reduce computational complexity without loss of good performance based on the optimal parameter selection strategy for choosing detection parameters of cyclic frequency and lag. Taking binary phase shift keying (BPSK) and quadrature phase shift keying (QPSK) signals as examples, the theoretical analyses are presented for choosing the optimal parameters. Simulation results are given to certify the correctness of the proposed parameter selection strategy and show the performance of the proposed method.     

Creation of extension knowledge base system about intelligent detection in dendrobium huoshanense photosynthesis process

Aiming at the limitations of the existing knowledge representations in intelligent detection, a novel extension-based knowledge representation (EKR) is proposed. The definitions, grammar rules, and formal semantics of EKR are presented. A rhombus solving strategy (RSS) based on EKR is discussed in detail, including creation of the problem oriented model, extension operator, the solution formation of contradictions problem and extended inference of matter-element. A knowledge base system based on EKR and RSS is developed, which is applied in intelligent detection in the Dendrobium huoshanense photosynthesis process (DHPP). More reasonable results are obtained than traditional rule-based system. The EKR is feasible in intelligent detection to solve the limitations of traditional knowledge representations.     

Memory based scheme to monitor non-random small shift patterns in manufacturing process

Consistent high-quality and defect-free production is the demand of the day. The product recall not only increases engineering and manufacturing cost but also affects the quality and the reliability of the product in the eye of users. The monitoring and improvement of a manufacturing process are the strength of statistical process control. In this article we propose a process monitoring memory-based scheme for continuous data under the assumption of normality to detect small non-random shift patterns in any manufacturing or service process.The control limits for the proposed scheme are constructed. The in-control and out-of-control average run length(AVL) expressions have been derived for the performance evaluation of the proposed scheme. Robustness to non-normality has been tested after simulation study of the run length distribution of the proposed scheme, and the comparisons with Shewhart and exponentially weighted moving average(EWMA) schemes are presented for various gamma and t-distributions. The proposed scheme is effective and attractive as it has one design parameter which differentiates it from the traditional schemes. Finally, some suggestions and recommendations are made for the future work.     

Exploiting parallelism in the simulation of general purpose graphics processing unit program

The simulation is an important means of performance evaluation of the computer architecture. Nowadays, the serial simulation of general purpose graphics processing unit (GPGPU) architecture is the main bottleneck for the simulation speed. To address this issue, we propose the intra-kernel parallelization on a multicore processor and the inter-kernel parallelization on a multiple-machine platform. We apply these two methods to the GPGPU-sim simulator. The intra-kernel parallelization method firstly parallelizes the serial simulation of multiple compute units in one cycle. Then it parallelizes the timing and functional simulation to reduce the performance loss caused by the synchronization between different compute units. The inter-kernel parallelization method divides multiple kernels of a CUDA program into several groups and distributes these groups across multiple simulation hosts to perform the simulation. Experimental results show that the intra-kernel parallelization method achieves a speed-up of up to 12 with a maximum error rate of 0.009 4% on a 32-core machine, and the inter-kernel parallelization method can accelerate the simulation by a factor of up to 3.9 with a maximum error rate of 0.11% on four simulation hosts. The orthogonality between these two methods allows us to combine them together on multiple multi-core hosts to get further performance improvements.     

Numerical study of wave loads on a caisson-pile-deck composite structure over permeability seabed

To get the accurate wave loads on wharf composite structure, the wave force on small-scale piles and the uplift force on lower surface of caisson must be considered. Based on the Reynolds averaged Navier-Stokes (RANS) equations, the pore media theory and the volume of fluid (VoF) method, a three-dimensional numerical model is established. The model has been developed to simulate wave interaction with a composite structure including caisson, piles and deck. The numerical results agree very well with the experimental data on total force. The spatial distributions of the non-dimensional wave height and the maximum of wave pressure on surface of composite structure are presented and discussed. The effects of relative caisson length, relative wave height and relative caisson height on horizontal wave force are given. The result indicates that the horizontal wave force achieves maximum value at the relative caisson length of 0.18 and increases linearly with the increase of the relative caisson and wave height. It is proved that the model is an accurate and efficient numerical tool to investigate different problems of wave-structure interaction.     

Experimental investigations on continuous regenerative anti-lock braking system of full electric vehicle

Functions of anti-lock braking for full electric vehicles (EV) with individually controlled wheel drive can be realized through conventional brake system actuating friction brakes and regenerative brake system actuating electric motors. To analyze advantages and limitations of both variants of anti-lock braking systems (ABS), the presented study introduces results of experimental investigations obtained from proving ground tests of all-wheel drive EV. The brake performance is assessed for three different configurations: hydraulic ABS; regenerative ABS only on the front axle; blended hydraulic and regenerative ABS on the front axle and hydraulic ABS on the rear axle. The hydraulic ABS is based on a rule-based controller, and the continuous regenerative ABS uses the gain-scheduled proportional-integral direct slip control with feedforward and feedback control parts. The results of tests on low-friction road surface demonstrated that all the ABS configurations guarantee considerable reduction of the brake distance compared to the vehicle without ABS. In addition, braking manoeuvres with the regenerative ABS are characterized by accurate tracking of the reference wheel slip that results in less oscillatory time profile of the vehicle deceleration and, as consequence, in better driving comfort. The results of the presented experimental investigations can be used in the process of selection of ABS architecture for upcoming generations of full electric vehicles with individual wheel drive.     

Effects of bulbous bow on cross-flow vortex structures around a streamlined submersible body at intermediate pitch maneuver: A numerical investigation

A flow field around a streamlined body at an intermediate angle of incidence is dominated by cross-flow separation and vortical flow fields. The separated flow leads to a pair of vortices on the leeside of the body; therefore, it is essential to accurately determine this pair and estimate its size and location. This study utilizes the element-based finite volume method based on RANS equations to compute a 3D axisymmetric flow around a SUBOFF bare submarined hull. Cross-flow vortex structures are then numerically simulated and compared for a submarine with SUBOFF and DRDC STR bows. Computed results of pressure and shear stress distribution on the hull surface and the strength and locations of the vortex structures are presented at an intermediate incidence angle of 20°. A wind tunnel experiment is also conducted to experimentally visualize the vortex structures and measure their core locations. These experimental results are compared with the numerical data, and a good agreement is found.     

Experiments on the resistance of a large transport vessel navigating in the Arctic region in pack ice conditions

In this study, we carried out model tests to investigate the ice failure process and the resistance experienced by a transport vessel navigating in the Arctic region in pack ice conditions. We tested different navigation velocities, ice plate sizes, and ice concentrations. During the tests, we closely observed several phenomena, including the modes of interaction of the ice ship and the moving and failure modes of ice. We also measured the vessel resistances under different conditions. The test results indicate that the navigation velocity is a significant determinant of the moving and failure modes of ice. Moreover, vessel resistance is remarkably dependent on the ice concentration and navigation velocity. The variances of the mean and maximum resistance are also compared and discussed in detail.