Analysis of the effect of cold start on fuel economy of gasoline automatic transmission vehicle

FTP75 driving cycle is used in many countries for evaluation of vehicle fuel economy. FTP75 has 3 phases, where the Phase 1 and the Phase 3 have a same velocity profile, but the Phase1, which is known as cold start phase, shows lower fuel efficiency than the Phase 3. In order to analyze the difference of fuel economy between Phase 1 and Phase 3, vehicle tests are performed. The test results show that the differences of fuel economy is ranging from 3.9% to 18.5%. The factors of the difference of fuel economy for gasoline automatic transmission vehicles are analyzed in this research. The key factors affecting the difference of fuel economy are engine friction loss, torque converter loss and accessory loss. The quantitative analysis of these factors is performed.     

Improved hot-stamping analysis of tubular boron steel with direct measurement of heat convection coefficient

There are two types of hot-stamping processes, direct and indirect, depending on the sequence of the heating, forming, and quenching steps and the method used for each step. In this study, an indirect hot-stamping process consisting of forming at room temperature, heating, and water quenching was applied to develop a coupled torsion beam axle. The analysis results indicated that the application of the heat convection coefficient is critical in the simulations and must take into account the temperature and specific location in the model to ensure the accuracy of the heating and quenching analysis. The heat convection coefficients used in the analysis were directly measured at various positions of the tube (e.g., outside, inside, and bending region) using thermocouples, and the final values were determined through correlation between the actual tests and numerical analysis. The experimental and simulated final deformed shape and temperature distribution were in good agreement.     

Age and cross-cultural comparison of drivers’ cognitive workload and performance in simulated urban driving

Driving demands significant psychomotor attention and requires even more when drivers are engaged in secondary tasks that increase cognitive workload and divert attention. It is well established that age influences driving risk. Less is known about how culture impacts changes in attention. We conducted parallel driving simulations in the US and Korea to measure the extent to which age and culture influence dual-task performance. There were 135 participants divided into two groups: a younger group aged 20∼29, and an older group aged 60∼69. Whereas some differences by culture appeared in absolute control measures, the younger participants showed similar mean velocity and compensatory patterns associated with increased cognitive load in the urban setting; however, the results from the older samples were less similar.     

Traffic-balancing algorithm for can systems with dual communication channels to enhance the network capacity

The controller area network (CAN) is the dominant protocol for in-vehicle network (IVN) systems because it provides bounded transmission delay among electronic control units (ECUs) at data rates between 100 Kbps and 1 Mbps. Many automotive companies have chosen the CAN protocol for their chassis network system of intelligent vehicles. However, the increasing number of ECUs in intelligent vehicles and the need for more intelligent functions require a network system with more network capacity and real-time capability. As one approach to enhance the network capacity of a CAN system, this paper introduces a CAN system with dual communication channels. This paper also presents a traffic-balancing algorithm that predicts the traffic of each channel and allocates frames to the most appropriate channel. An experimental testbed using commercial off-the-shelf microcontrollers with two CAN controllers was used to demonstrate the feasibility of the traffic-balancing algorithm.     

Experimental investigation of B20 combustion and emissions under various intake conditions for low-temperature combustion

Recently, biodiesel has emerged as an alternative fuel for achieving low-temperature combustion (LTC). Several articles in the literature have showed that oxygenated biofuels, including biodiesel, can improve combustion stability under high exhaust gas recirculation (EGR) operation, which is considered to be necessary for the removal of nitric oxides (NOx). The objective of this study was to investigate the performance and emissions of 20% biodiesel blended diesel fuel (B20) at various intake pressures and oxygen concentration levels to characterize the fuel for LTC application. The experimental investigation of B20 was carried out using a single-cylinder engine (SCE) at 1400 rpm and 50% load condition. A set of critical flow orifices with synthetic EGR was employed to simulate various intake pressures and EGR levels. The behavior of the B20 was first characterized under various intake conditions. The results showed that with high oxygen intake, B20 exhibited combustion and emission levels that were very similar to conventional diesel. However, B20 reduced combustion deterioration while exhibiting lower carbon monoxide (CO) and hydrocarbon (HC) emissions than diesel under low oxygen intake conditions.     

Development of an autonomous braking system using the predicted stopping distance

An autonomous braking system is designed using the prediction of the stopping distance. The stopping distance needs to be determined by considering several factors such as the desired deceleration and the speed of the hydraulic brake actuator. In particular, the actuator speed is very critical because it affects the shape of the deceleration response and it determines the accuracy of the predicted stopping distance. The autonomous braking control algorithm is designed based on the predicted stopping distance. The proposed autonomous braking system has been validated in autonomous vehicle tests and demonstrates that the subject vehicle can avoid the collision effectively.     

Robustness analysis of ESC ECU to characteristic variation of vehicle chassis components using HILS technique

The ESC system, since its introduction in the mid 90s, has greatly contributed to prevention of vehicle accidents with its capability of maintaining vehicle stability in severe driving conditions. Due to its significant advantages, many nations are now adopting regulations that mandate installation of the ESC system in all classes of passenger vehicles — from mini to luxury. Accordingly it became important to know whether an ESC ECU can yield good performance on a wide range of vehicle parameter changes. In this paper, robustness analysis was conducted to study how characteristic variation of the main chassis components affect the performance of the ESC ECU. This analysis was carried out using a HILS system built on an actual ESC ECU. The variation range of each chassis component was carefully selected considering the component’s design criteria adopted in automotive industries. Based upon the robustness analysis results, the allowable variation ranges of the chassis components for ensuring sound performance of an ESC ECU were proposed.