A tour-based model of travel mode choice

This paper presents a new tour-based mode choice model. The model is agent-based: both households and individuals are modelled within an object-oriented, microsimulation framework. The model is household-based in that inter-personal household constraints on vehicle usage are modelled, and the auto passenger mode is modelled as a joint decision between the driver and the passenger(s) to ride-share. Decisions are modelled using a random utility framework. Utility signals are used to communicate preferences among the agents and to make trade-offs among competing demands. Each person is assumed to choose the best combination of modes available to execute each tour, subject to auto availability constraints that are determined at the household level. The households allocations of resources (i.e., cars to drivers and drivers to ride-sharing passengers) are based on maximizing overall household utility, subject to current household resource levels. The model is activity-based: it is designed for integration within a household-based activity scheduling microsimulator. The model is both chain-based and trip-based. It is trip-based in that the ultimate output of the model is a chosen, feasible travel mode for each trip in the simulation. These trip modes are, however, determined through a chain-based analysis. A key organizing principle in the model is that if a car is to be used on a tour, it must be used for the entire chain, since the car must be returned home at the end of the tour. No such constraint, however, exists with respect to other modes such as walk and transit. The paper presents the full conceptual model and estimation results for an initial empirical prototype. Because of the complex nature of the model decision structure, choice probabilities are simulated from direct generation of random utilities rather than through an analytical probability expression.     

Evaluation,prioritization and selection of transportation investment projects in New York City

Over the last decade, a large number of high capital cost transportation projects have been proposed for the New York City Region. Many have resulted from addressing evolving capacity needs, changes in regional demographics and economics, meeting the improvements necessitated by operating century old subway systems and recognizing the impact of moving freight in a dense region. But the catalyst for bringing all of these projects to the attention of the public and all regional agencies was the tragedy of September 11, 2001. While these projects entail massive investments ($50–$60 billion), little analytical work has been carried out to measure the transportation and economic costs and benefits they entail and to categorize them accordingly. Competition among agencies to secure adequate resources to implement any of the desired projects makes such analysis necessary; yet there still remain political, vested economic interests and agency rivalry barriers to achieving this important planning objective. This paper reports the methodological approach taken by these authors for consistent and transparent project evaluation and then presents results from the ranking and prioritizing methodology. The policy underpinnings and implications of the analysis are discussed in a subsequent paper and thus only briefly touched upon here in the concluding section.     

TDRM: A peer-to-peer-based taxonomy data ring model

Peer-to-peer (P2P) networks are widely used due to their good scalability and robustness. This paper considers the characteristics of data sources which use some taxonomy hierarchies to classify and organize their data objects, combines P2P techniques, and proposes a P2P based taxonomy data ring model (TDRM). The model makes full use of the semantic information contained in taxonomy hierarchies, places the data objects having similar semantics together, and organizes them into one dimensional ring structure. Super-peers dynamically join the ring according to the requirement. The routing connections among super-peers are created, which are similar to Chord ring, thus a semantics based structured super-peer network is formed. Experiments show that the model has good scalability and search efficiency.     

Pulsed eddy current signal denoising based on singular value decomposition

The noise as an undesired phenomenon often appears in the pulsed eddy current testing (PECT) signal, and it is difficult to recognize the character of the testing signal. One of the most common noises presented in the PECT signal is the Gaussian noise, since it is caused by the testing environment. A new denoising approach based on singular value decomposition (SVD) is proposed in this paper to reduce the Gaussian noise of PECT signal. The approach first discusses the relationship between signal to noise ratio (SNR) and negentropy of PECT signal. Then the Hankel matrix of PECT signal is constructed for noise reduction, and the matrix is divided into noise subspace and signal subspace by a singular valve threshold. Based on the theory of negentropy, the optimal matrix dimension and threshold are chosen to improve the performance of denoising. The denoised signal Hankel matrix is reconstructed by the singular values of signal subspace, and the denoised signal is finally extracted from this matrix. Experiment is performed to verify the feasibility of the proposed approach, and the results indicate that the proposed approach can reduce the Gaussian noise of PECT signal more effectively compared with other existing approaches.     

An appropriate unidirectional wave spectrum model for the Strait of Hormuz

The objective of this paper is to introduce an appropriate unidirectional wave spectrum model for the Strait of Hormuz. The research is focused on assessing performance of standard wave spectrum models in the region. By evaluating such models based on valuable measurement data recently published, the calibration procedure has been conducted on such standard models to reach a better concordance between a modified standard spectral model and observed field spectra. The calibration is performed initially with respect to four distinct directions related to four available measurement stations. So, it results in four sets of coefficients for a nominated model. Next, it is continued to reach just one model insensitive to directions. Results clearly showed that the International Towing Tank Conference (ITTC) model is more appropriate than Joint North Sea Wave Project (JONSWAP) and Pierson and Moskowitz (PM) models in this area, even without any calibration. However, modifications have been successful on improving the conformity of the model.     

Numerical simulation of the spreading dynamic responses of the multibody system with a floating base

To simulate the dynamic responses of the multibody system with a floating base when the upper parts spread with a certain sequence and relative speed, the homogeneous matrix method is employed to model and simulate a four-body system with a floating base and the motions are analyzed when the upper parts are spread sequentially or synchronously. The rolling, swaying and heaving temporal variations are obtained when the multibody system is under the conditions of the static water along with the wave loads and the mean wind loads or the single pulse wind loads, respectively. The moment variations of each joint under the single pulse wind load are also gained. The numerical results showed that the swaying of the floating base is almost not influenced by the spreading time or form when the upper parts spread sequentially or synchronously, while the rolling and the heaving mainly depend on the spreading time and forms. The swaying and heaving motions are influenced significantly by the mean wind loads. The single pulse wind load also has influences on the dynamic responses. The torque of joint 3 and joint 4 in the single pulse wind environment may be twice that in the windless environment when the system spreads with 60 s duration.     

Numerical investigation of transmission of low frequency sound through a smooth air-water interface

It is the traditional belief that sound transmission from water to the air is very weak due to a large contrast between air and water impedances. Recently, the enhanced sound transmission and anomalous transparency of air-water interface have been introduced. Anomalous transparency of air-water interface states that the sound generated by a submerged shallow depth monopole point source localized at depths less than 1/10 sound wavelength, can be transmitted into the air with omni-directional pattern. The generated sound has 35 times higher power compared to the classical ray theory prediction. In this paper, sound transmission through air-water interface for a localized underwater shallow depth source is examined. To accomplish this, two-phase coupled Helmholtz wave equations in two-phase media of air-water are solved by the commercial finite element based COMSOL Multiphysics software. Ratios of pressure amplitudes of different sound sources in two different underwater and air coordinates are computed and analyzed against non-dimensional ratio of the source depth (D) to the sound wavelength (λ). The obtained results are compared with the experimental data and good agreement is displayed.     

Three-dimensional numerical investigation of the separation process in a vortex tube at different operating conditions

Air separators provide safe, clean, and appropriate air flow to engines and are widely used in vehicles with large engines such as ships and submarines. In this operational study, the separation process inside a Ranque–Hilsch vortex tube cleaning (cooling) system is investigated to analyze the impact of the operating gas type on the vortex tube performance; the operating gases used are air, nitrogen, oxygen, carbon dioxide and nitrogen dioxide. The computational fluid dynamic model used is equipped with a three-dimensional structure, and the steady-state condition is applied during computations. The standard k–ε turbulence model is employed to resolve nonlinear flow equations, and various key parameters, such as hot and cold exhaust thermal drops, and power separation rates, are described numerically. The results show that nitrogen dioxide creates the greatest separation power out of all gases tested, and the numerical results are validated by good agreement with available experimental data. In addition, a comparison is made between the use of two different boundary conditions, the pressure-far-field and the pressure-outlet, when analyzing complex turbulent flows inside the air separators. Results present a comprehensive and practical solution for use in future numerical studies.     

Modeling the flow regime near the source in underwater gas releases

Recent progress in calculating gas bubble sizes in a plume, based on phenomenological approaches using the release conditions is a significant improvement to make the gas plume models self-reliant. Such calculations require details of conditions Near the Source of Plume (NSP); (i.e. the plume/jet velocity and radius near the source), which inspired the present work. Determining NSP conditions for gas plumes are far more complex than that for oil plumes due to the substantial density difference between gas and water. To calculate NSP conditions, modeling the early stage of the plume is important. A novel method of modeling the early stage of an underwater gas release is presented here. Major impact of the present work is to define the correct NSP conditions for underwater gas releases, which is not possible with available methods as those techniques are not based on the physics of flow region near the source of the plume/jet. We introduce super Gaussian profiles to model the density and velocity variations of the early stages of plume, coupled with the laws of fluid mechanics to define profile parameters. This new approach, models the velocity profile variation from near uniform, across the section at the release point to Gaussian some distance away. The comparisons show that experimental data agrees well with the computations.     

峡谷河流的挂网式人行悬索桥设计

为了降低峡谷河流人行悬索桥的造价,本文提出一种峡谷河流的双曲抛物面空间缆索挂网式人行悬索桥,将双曲抛物面空间缆索网分散锚固于峡谷河流两侧的悬崖陡壁岩石之上,取消桥塔,取消吊索体系,管桁架式桥面加劲梁直接搁置在双曲抛物面空间缆索网之上,节约造价,装配式施工简便。结合某150m跨径峡谷河流人行景观悬索桥,建立Midas有限元分析模型,开展动力模态特性分析研究,验证了双曲抛物面空间缆索挂网式人行悬索桥结构具有良好的抗风稳定性。