Damper Models for Heavy Vehicle Ride Dynamics

A laboratory rig for testing hydraulic dampers using the 'hardware-in-the-loop' method is described, and the accuracy of the test method is investigated. A mathematical model of a hydraulic shock absorber is then developed. The model is suitable for vehicle simulations and has seven parameters which can be determined by simple dynamic measurements on a test damper. The shock absorber model is validated under realistic operating conditions using the test rig, and the relative importance of various features of the model on the accuracy of vehicle simulations is investigated.     

An Optimal Self-Tuning Controller for an Active Suspension

An optimal self-tuning control algorithm is presented for vehicle suspension design. The controller, incorporating a weighting controller, state observer and parameter estimator, is designed according to linear optimal control (LQG) theory. Based on the updated estimates of vehicle parameters and states, and the adapted weighting parameters, the LQG controller provides the optimal set of gains over different operating conditions. The feasibility and effectiveness of the proposed self-tuning system was investigated and proved by simulation studies.     

In-vehicle technology for self-driving cars: Advantages and challenges for aging drivers

The development of self-driving cars or autonomous vehicles has progressed at an unanticipated pace. Ironically, the driver or the driver-vehicle interaction is a largely neglected factor in the development of enabling technologies for autonomous vehicles. Therefore, this paper discusses the advantages and challenges faced by aging drivers with reference to in-vehicle technology for self-driving cars, on the basis of findings of recent studies. We summarize age-related characteristics of sensory, motor, and cognitive functions on the basis of extensive age-related research, which can provide a familiar to better aging drivers. Furthermore, we discuss some key aspects that need to be considered, such as familar to learnability, acceptance, and net effectiveness of new in-vehicle technology, as addressed in relevant studies. In addition, we present research-based examples on aging drivers and advanced technology, including a holistic approach that is being developed by MIT AgeLab, advanced navigation systems, and health monitoring systems. This paper anticipates many questions that may arise owing to the interaction of autonomous technologies with an older driver population. We expect the results of our study to be a foundation for further developments toward the consideration of needs of aging drivers while designing self-driving vehicles.     

Robust lane markings detection and road geometry computation

Detection of lane markings based on a camera sensor can be a low-cost solution to lane departure and curve-over-speed warnings. A number of methods and implementations have been reported in the literature. However, reliable detection is still an issue because of cast shadows, worn and occluded markings, variable ambient lighting conditions, for example. We focus on increasing detection reliability in two ways. First, we employed an image feature other than the commonly used edges: ridges, which we claim addresses this problem better. Second, we adapted RANSAC, a generic robust estimation method, to fit a parametric model of a pair of lane lines to the image features, based on both ridgeness and ridge orientation. In addition, the model was fitted for the left and right lane lines simultaneously to enforce a consistent result. Four measures of interest for driver assistance applications were directly computed from the fitted parametric model at each frame: lane width, lane curvature, and vehicle yaw angle and lateral offset with regard the lane medial axis. We qualitatively assessed our method in video sequences captured on several road types and under very different lighting conditions. We also quantitatively assessed it on synthetic but realistic video sequences for which road geometry and vehicle trajectory ground truth are known.     

Design and power flow analysis for multi-speed automatic transmission with hybrid gear trains

A design approach for multi-speed automatic transmission with hybrid gear trains is proposed. The approach can be used to design automatic transmissions composed of planetary gear trains, fixed-axis gear trains or hybrid gear trains and the shifts follow the “one controlled part changing rule”. This approach consists of four parts: determining graphical configuration of the system using hypergraphs, analyzing power flow formulation, obtaining shifts configurations by shift searching algorithm, and determining physical configuration. A nine forward speed automatic transmission is analyzed to highlight the capacities of the proposed approach. The results have shown that the suggested approach is much clearer and less time consuming than the methods currently used.     

Topological analysis of powertrains for refuse-collecting vehicles based on real routes–Part I: Hybrid hydraulic powertrain

In this two-part paper, a topological analysis of powertrains for refuse-collecting vehicles (RCVs) based on the simulation of different architectures (internal combustion engine, hybrid electric, and hybrid hydraulic) on real routes is proposed. In this first part, a characterization of a standard route is performed, analyzing the average power consumption and the most frequent working points of an internal combustion engine (ICE) in real routes. This information is used to define alternative powertrain architectures. A hybrid hydraulic powertrain architecture is proposed and modelled. The proposed powertrain model is executed using two different control algorithms, with and without predictive strategies, with data obtained from real routes. A calculation engine (an algorithm which runs the vehicle models on real routes), is presented and used for simulations. This calculation engine has been specifically designed to analyze if the different alternative powertrain delivers the same performance of the original ICE. Finally, the overall performance of the different architectures and control strategies are summarized into a fuel and energy consumption table, which will be used in the second part of this paper to compare with the different architectures based on hybrid electric powertrain. The overall performance of the different architectures indicates that the use of a hybrid hydraulic powertrain with simple control laws can reduce the fuel consumption up to a 14 %.     

Vehicle rollover avoidance by application of gain-scheduled LQR controllers using state observers

Many researches have been conducted in the area of control applied to vehicle dynamics, aiming at reducing the possibility of the occurrence of the type of accident known as rollover. In this research, based on a common nonlinear model and its linearisation, a method for properly selecting matrices for solving the Riccati equation considering different speeds was proposed. The method showed in which ways speed really influences the choice of controller gains. By developing the dynamic equations for the yaw- and roll-coupled motions and modelling of controllers and state observers, it is possible to compare the efficacy of this control strategy using both linear and nonlinear simulations using Matlab. Significant results were obtained regarding the reduction of the rollover coefficient for a double-lane change manoeuvre at different speeds, thus indicating advantages of using this controller in practical cases.     

High-strain-rate fracture of adhesively bonded composite joints in DCB and TDCB specimens

Double-cantilever beam (DCB) and tapered double-cantilever beam (TDCB) specimens are the test configurations most commonly used to measure the fracture toughness of composites and adhesive joints. Strain rates of 1 to 18.47 m/s were applied to the test specimens via high-speed hydraulic test equipment. Because the fracture occurs through the adhesively bonded joints and the cracks grow rapidly, the crack length and beam displacement were recorded by a high-speed camera. An energy range from 0 to 10 J was often observed in the high-strain-rate fracture experiments for nonlinear plastic behavior of the dynamically loaded adhesively bonded DCB and TDCB specimens. The range of energy release rates (fracture energy) for TDCB specimen was 2 to 3 times higher than that of a DCB specimen for all high strain rates. The fracture energy of automotive adhesive joints can be estimated using the experimental results in this study for the fracture toughness (G_IC) under high rates of loading. The crack grows as the applied fracture energy exceeds the value of the critical energy release rate (G_IC) at the crack tip. The energy release rate was calculated using the fracture mechanics formula. The key fracture mechanics parameter, the fracture energy GIC, was ascertained as a function of the test rate and can be used to assess and model the overall joint performance.     

Network representation,continuum approximations and a solution to the spatial aggregation problem of traffic assignment

This paper complements the preceding one, which showed how one could modify equilibrium traffic assignment algorithms for networks with many centroids. In this one it is shown how one can substitute centroids by zones with continuous population densities. The technique, which is mathematically guaranteed to approximate a flow pattern in accordance with Wardrop's user equilibrium criterion, requires some geometrical calculations which can be handled off-line. With the suggested approach, it is possible to represent the spatial distribution of trip ends more realistically and this allows traffic assignment models to capture the effects of short and intrazonal trips in a way previously impossible. The method is shown to be computationally feasible.     

Assessment of diesel combustion noise overall level in transient operation

Combustion noise in passenger cars powered with direct injection (DI) diesel engines is frequently the main reason why end-users are reluctant to drive this type of vehicle. Thus, the great potential of diesel engines for environment preservation — due to their lower CO₂ emissions — could be missed. This situation worsens with the current design trends (engine downsizing) and the emerging new diesel combustion concepts (Homogeneous Charge Compression Ignition-HCCI, Premixed Charge Compression Ignition-PCCI, etc.), which are intrinsically noisy. This negative feature can be even more critical in transient operation due to the contribution of the temporal changes of both source and transmission path on engine noise. Therefore, combustion noise must be considered as an additional essential factor in engine development, together with performance, emissions and driveability. Thus, suitable evaluation procedures that can be integrated into the global engine development process in a timely and cost-effective manner are imperative. Regarding the evaluation procedures, most of the work available in the literature addressed combustion noise at steady operation. To surpass this limitation, two possible approaches — adapted from the classical and multiple regression methods — for the overall level assessment of combustion noise in transient conditions are evaluated in this paper.