都市圈视角下佛山市顺德区轨道交通线网规划思考

为深入研究都市圈背景下市辖区轨道交通线网规划方法,在总结国内外同类城市轨道交通发展经验的基础上,以佛山市顺德区为例,提出了1套适用于都市圈市辖区的轨道交通线网规划方法.     

铺缆船用电缆埋设犁土壤挖掘阻力计算

传统的计算埋设犁土壤挖掘阻力的方法一般采用经验公式计算。经验公式依赖丰富的试验数据，且只能适应特定形状和尺寸的埋设犁。由于埋设犁的形状和尺寸各不相同，基于经验公式计算土壤挖掘阻力的方法准确性不高。根据土力学基本原理，在力学分析的基础上，运用数学方法进行公式推导，得到用于计算不同形状尺寸埋设犁挖掘阻力的理论方法，解决依赖经验公式计算土壤挖掘阻力的局限性。     

位场向下延拓系数矩阵性质及Barzilai-Borwein向下延拓法

位场的向下延拓不仅仅能够提高地球物理数据解释的可靠性，在导航方面也有着重要的作用. 为了进一步提高计算精度和速度，提出了位场向下延拓的Barzilai-Borwein （BB）法. 首先证明了位场向下延拓的系数矩阵为对称的双重Toeplitz系统矩阵（block-Toeplitz-Toeplitz-block，BTTB）；其次，假定该系数矩阵为正定的条件下，采用BB法迭代求解下延方程组，并约束其迭代步长确保算法收敛；最后，分别通过理论模型无噪声数据和实际资料对BB法进行检验，并与积分迭代法进行对比. 结果表明:理论模型验证时，同一收敛精度条件下，BB法的计算速度是积分迭代法的2倍以上；实际资料检验时，在相同计算次数下，BB法与积分迭代法的平均相对误差分别为6.1%与7.7%.      

新加坡“教学工厂”对我国骨干高职院校建设的启示

新加坡高等职业技术教育中的＂教学工厂＂这一教学模式,在产学结合上有显著的特点：强调教学与实践相结合、模拟现场操作、突出行业性。文章在借鉴新加坡经验的基础上,联系我国高等职业教育实际,对我国的高等职业教育提出一些建议。     

一种商用车铅酸蓄电池状态监控系统的开发

本文介绍一种商用车铅酸蓄电池状态监控系统的开发,系统实现蓄电池传感器实时采集蓄电池状态参数信息,并通过TBOX将数据上传至后台服务器,进行数据存储分析及报警判断,并将亏电报警信息推送给手机客户端,提醒用户注意。同时,系统根据蓄电池SOC值的限值判断,进行电磁开关的切断控制,以保证车辆的正常起动。     

Reliability Modeling and Maintenance Policy Optimization for Deteriorating System Under Random Shock

Performance degradation and random shock are commonly regarded as two dependent competing risks for system failures. One method based on effective service age is proposed to jointly model the cumulative effect of random shock and system degradation, and the reliability model of degradation system under Nonhomogeneous Poisson processes (NHPP) shocks is derived. Under the assumption that preventive maintenance (PM) is imperfective and the corrective maintenance (CM) is minimal repair, one maintenance policy which combines PM and CM is presented. Moreover, the two decision variables, PM interval and the number of PMs before replacement, are determined by a multi-objective maintenance optimization method which simultaneously maximizes the system availability and minimizes the system long-run expect cost rate. Finally, the performance of the proposed maintenance optimization policy is demonstrated via a numerical example.     

Occupant injury risk analysis at NASS/CDS database

Injury information for vehicle occupants from the body regions of the head, thorax, abdomen, and upper and lower extremities, due to the restraints and interior parts of the vehicle, were extracted from the 2009 ~ 2012 NASS/CDS database. For those cases with high occurrence frequency, a detailed and comprehensive data analysis was performed to find the relationship between the accident, occupant, vehicle, and injury data. A numerical frontal impact sled model with the Hybrid III dummy and the GHBMC human body model was constructed to simulate and identify those injury risks according to NASS/CDS. Among the 5,734 injuries to the aforementioned body regions from frontal crashes are, listed by frequency of occurrence, the lower extremity (27.8 %), upper extremity (21.3 %), thorax (15.1 %), face (10.9 %), spine (8.7 %), head (7.3 %), and abdomen (6.9 %). The main injury sources to the head were the windshield, side structure, and steering wheel. For the thorax and abdomen they were the seat belt and steering wheel. For the lower extremity it was the instrument panel. The main injury patterns for the head were the concussion and the contusion. For the thorax they were vessel laceration and lung contusion. For the abdomen they were laceration and contusion of the organs. For the lower extremity they were bone fracture and ligament rupture. The steering wheel and seat positions were main factors affecting head and thorax injury risks. From the sled impact simulation, high injury risks of the head and thorax were assessed respectively at conditions of steering column tilt down and rear most seat position, which correlated well with the findings from the NASS/CDS data analysis.     

Approximate optimal AUTOSAR software components deploying approach for automotive E/E system

The AUTOSAR has been developed as the worldwide standard for automotive E/E software systems, making the electronic components of different suppliers to be employed universally. However, as the number of component-based applications in modern automotive embedded systems grows rapidly and the hardware topology becomes increasingly complex, deploying such large number of components in automotive distributed system in manual way is over-dependent on experience of engineers which in turn is time consuming. Furthermore, the resource limitation and scheduling analysis make the problems more complex for developers to find out an approximate optimal deploying approach in system integration. In this paper, we propose a novel method to deploy the AUTOSAR components onto ECUs with the following features. First, a clustering algorithm is designed for deploying components automatically within relatively low time complexity. Second, a fitness function is designed to balance the ECUs load. The goal of our approach is to minimize the communication cost over all the runnable entities while meeting all corresponding timing constraints and balancing all the ECUs load. The experiment results show that our approach is efficient and has well performance by comparing with other existing methods in specific and synthetic data set.     

基于SHEL和三角模糊数理论的地铁钻爆法施工安全评价方法研究

为合理应用决策数据中不同专家的背景知识,找出地铁施工过程中安全测评体系的关注重点,根据地铁施工的特点和SHEL安全模型理论,建立以人-软件(L-S)、人-硬件(L-H)、人-环境(L-E)和人-人(L-L)4个环节为基础的钻爆法地铁施工安全指标体系。请专家给出指标语义评价等级和指标权重语义评价等级,并根据其与三角模糊数的对应关系分别得出三角模糊数评价值。针对不同专家的重要性程度差异,提出基于三角模糊数的群一致性评价方法,得出专家综合权重,集结评价数据,最终得到安全评价结果。最后,对青岛地铁1号线过海段进行实例分析。结果表明,该方法可以解决群评价过程中专家个体权威与群体共识难以兼顾的问题,能够充分利用群决策中的原始评价信息,提高地铁施工安全水平评价的准确性。     

“中—尼—印铁路通道”线路设计及建设可行性分析

随着我国"一带一路"倡议的推进,跨国运输通道的建设成为倡议实施的关键环节之一,而我国建设复杂地质条件下跨国基础设施的经验尚不丰富。"中—尼—印铁路通道"是一条途经尼泊尔,连接中国和印度2个大国的运输通道,基于实地考察,分析该通道建设的必要性及建成后的效益,对线路进行初步规划,并总结该通道建设的难点:铁路轨道坡度大;沿线区域地质构造复杂;周边基础设施落后,施工条件恶劣;大量深长隧道以及大跨径高桥梁;环境以及气候条件复杂。同时对沿线隧道以及桥梁的建设可行性进行分析,并给出施工建议:沿线隧道采用以TBM法为主、钻爆法为辅的施工方法;桥梁建设则因地制宜,根据不同区间的地质特点,采用相应的建设方法。