船舶柴油机气门材料系列国产化探讨

柴油机气门材料可以实现国产化.     

Analysis on Ground Surface Deformation and Influence of Construction Parameters Caused by Two Different Shield Machines in Double-tube Tunnelling北大核心CSCD

Based on a shield-driven running tunnel project of Hangzhou Metro Line 2, this paper carries out field measuring of the ground surface deformation caused by two different shield machines in double-tube tunnelling in soft soil areas, obtains the laws of the surface deformation caused by shield-driven double-tube tunnelling and verifies the applicability of the modified Peck formula to double-tube tunnelling. The results show that in soft soil areas the impacts on ground surface deformation caused by different shield construction parameters in the previously and subsequently excavated tunnels are different, while the surface deformation changes sharply before and after the shield machine passing through the cutting face, and a rebound phenomenon occurs when the shield tail passes through the cutting face due to the influence of the grouting; The cutterhead torque of the shield machine in soft soil areas can be composed of five calculation factors, and the calculation results are in good agreement with the measured values. The larger the opening rate of the shield cutterhead is, the larger the average torque value will be, the higher the percentage of large ground loss rate will be, and the larger the maximum ground surface settlement will be; The ratio of cutterhead torque T to mucking volume per ring Q is used as the control parameter for analyzing the ground surface settlement, and a certain positive correlation between the ratio and the surface settlement value is determined, the smaller the cutterhead opening rate is, the more accurate the fitting results will be. © 2022, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

基于力学分析的皮卡车牵引能力研究

本文介绍了一种基于力学分析的皮卡车(也称多用途货车)牵引能力的理论计算和试验方法,得出了决定皮卡车牵引能力的主要因素有:皮卡车动力传动系统能力、驱动形式、结构强度,挂车类型以及道路情况等。经验证,理论计算得到的牵引能力与试验结果一致性较好:通过皮卡车牵引能力的计算和验证,能够有效指导企业进行设计开发,充分发挥皮卡车较强的牵引能力特性,推动皮卡车市场发展。     

给装船机夹轨器增加手动泵装置

神华天津煤炭码头装船机系统在投入运营的一年多时间里,行走机构夹轨器常发生压力开关损坏、电磁线圈损坏等故障,导致装船机不能正常行走.为此,我们给原来只有电动系统的装船机夹轨器增加了由手动泵、高压球阀、油箱等组装成的手动泵装置,其打出的高压油通过油管直接接入原液压系统,保-证其正常工作.在油路中增加高压球阀,以保证手动泵装置与原电动泵装置互不干扰.     

摩托车和轻便摩托车用喇叭性能测试分析

摩托车和轻便摩托车用喇叭的性能测试主要包括基本声学性能和耐久性能测试,建立并执行统一、科学、合理的测试标准,是检测和评价喇叭品质的先决条件,是喇叭产品设计开发、合格检测及调试的基础,不同的试验方法,会给喇叭单品或装车性能的检测带来不同的结果,会给摩托车产品的生产、销售和出口造成一定的影响。     

母亲与子女间龋患关系的调查分析

对113对母亲和幼儿间龋病的患病情况进行了调查和对比分析。结果发现：当母亲为龋患者时，幼儿乳牙患龊的可能性高于母亲为无龋者的幼儿，这一现象在男性幼儿中更为明显。这说明母亲的患龋情况对幼儿有一定的影响，这将为预测幼儿龋齿发生的可能性和对患龋高危儿童采取重点预防措施提供理论依据。     

An investigation of the performance of an electronic in-line pump system for diesel engines

WIT Electronic Fuel System Co., Ltd. has developed a new fuel injector, the Electronic In-line Pump （EIP） system, designed to meet China＇s diesel engine emission and fuel economy regulations. It can be used on marine diesel engines and commercial vehicle engines through different EIP systems. A numerical model of the EIP system was built in the AMESim environment for the purpose of creating a design tool for engine application and system optimization. The model was used to predict key injection characteristics under different operating conditions, such as injection pressure, injection rate, and injection duration. To validate these predictions, experimental tests were conducted under the conditions that were modeled. The results were quite encouraging and in agreement with model predictions. Additional experiments were conducted to study the injection characteristics of the EIP system. These results show that injection pressure and injection quantity are insensitive to injection timing variations, this is due to the design of the constant velocity cam profile. Finally, injection quantity and pressure vs. pulse width at different cam speeds are presented, an important injection characteristic for EIP system calibration.     

发挥保税港区作用 建设上海国际航运中心

在阐述上海洋山保税港区与宁波梅山保税港区特色及其现状的基础上，结合国际航运中心确立的相关关键因素，指出两个保税港区的设立有助于完善港口的各项功能、吸引国际中转货量、促进港口腹地经济发展和提高口岸通关效率等，从而有利于推进上海国际航运中心建设，并提升其国际竞争力。     

基于ADC模型的通信安全设备效能评估

结合通信安全设备的结构、工作特性及使用环境,利用ADC模型的基本原理,进行密码装备效能分析与评估研究.在建立通信安全设备能力层次结构的基础上,确定通信安全设备效能评价指标体系.根据ADC模型思想,给出分析方法和计算公式.实例分析结果验证了方法的可行性与实用性.     

一种基于小波去噪的脉冲噪声抑制方法

小波去噪是近年来兴起的信号处理领域中的高新技术,而目前许多研究方法都是以高斯噪声为背景的.在小波阈值去噪的基础上,将伪随机m序列引入小波去噪方法中,可有效去高斯噪声中掺杂的脉冲噪声.