船用柴油发电机组模拟系统调速特性控制器研究

本文针对实验室对利用柴油机进行船舶电力系统研究的需求,提出了一种基于PLC控制变频器连接带编码器的异步电动机和同步发电机组成一套模拟柴油机特性曲线的实验设备,配套研制了调速特性控制器,整套系统设备成本低,精度高,占地面积小,实验结果令人满意,为柴油机特性曲线的研究提供了一种新思路。     

舰艇发电机定子温升辨识模型研究

本文以一段定子铁心和一个通风道为研究对象,分析了定子铁心温升、绕组温升与发电机相电压、相电流、无功功率之间的状态方程。并根据此状态方程,推导出了定子绕组温升与发电机相电压、相电流、无功功率之间的传递函数,此传递函数即为定子绕组温升辨识模型。最后,通过实际试验验证了该模型的正确性,为发电机状态监测研究提供了基础。     

分离卸荷式板桩码头工作性状的静力分析

分离卸荷式板桩码头,作为近年来一种新型码头结构形式,在保持传统板桩码头优势的同时,可适用于深水泊位。目前,对其工作性状和工作机理的理论研究还不够成熟。为进一步了解其工作性状,利用有限元软件ABAQUS对某分离卸荷式板桩码头进行有限元建模和静力分析,分析卸荷承台及群桩设置的作用及工作性状,为码头设计及优化提供相关依据。     

A havelock source panel method for near-surface submarines

A panel method is described for calculating potential flow around near-surface submarines. The method uses Havelock sources which automatically satisfy the linearized free-surface boundary condition. Outputs from the method include pressure field, pressure drag, wave resistance, vertical force, trim moment and wave pattern. Comparisons are made with model tests for wave resistance of Series 58 and DARPA SUBOFF hulls, as well as with wave resistance, lift force and trim moment of three length-to-diameter variants of the DSTO Joubert submarine hull. It is found that the Havelock source panel method is capable of determining with reasonable accuracy wave resistance, vertical force and trim moment for submarine hulls. Further experimental data are required in order to assess the accuracy of the method for pressure field and wave pattern prediction. The method is implemented in the computer code “HullWave” and offers potential advantages over RANS-CFD codes in terms of speed, simplicity and robustness.     

A non-geometrically similar model for predicting the wake field of full-scale ships

The scale effect leads to large discrepancies between the wake fields of model-scale and actual ships, and causes differences in cavitation performance and exciting forces tests in predicting the performance of actual ships. Therefore, when test data from ship models are directly applied to predict the performance of actual ships, test results must be subjected to empirical corrections. This study proposes a method for the reverse design of the hull model. Compared to a geometrically similar hull model, the wake field generated by the modified model is closer to that of an actual ship. A non- geometrically similar model of a Korean Research Institute of Ship and Ocean Engineering (KRISO)’s container ship (KCS) was designed. Numerical simulations were performed using this model, and its results were compared with full-scale calculation results. The deformation method of getting the wake field of full-scale ships by the non-geometrically similar model is applied to the KCS successfully.     

Experimental and numerical investigations on vibration characteristics of a loaded ship model

In this paper, vibration characteristics of the structure in the finite fluid domain are analyzed using a coupled finite element method. The added mass matrix is calculated with finite element method (FEM) by 8-node acoustic fluid elements. Vibration characteristics of the structure in finite fluid domain are calculated combining structure FEM mass matrix. By writing the relevant programs, numerical analysis on vibration characteristics of a submerged cantilever rectangular plate in finite fluid domain and loaded ship model is performed. A modal identification experiment for the loaded ship model in air and in water is conducted and the experiment results verify the reliability of the numerical analysis. The numerical method can be used for further research on vibration characteristics and acoustic radiation problems of the structure in the finite fluid domain.     

Numerical calculation of supercavitating flows over the disk cavitator of a subsonic underwater projectile

To deal with the effect of compressible fluids on the supercavitating flow over the subsonic disk cavitator of a projectile, a finite volume method is formulated based on the ideal compressible potential theory. By using the continuity equation and Tait state equation as well as Riabouchinsky closure model, an “inverse problem” solution is presented for the supercavitating flow. According to the impenetrable condition on the surface of supercavity, a new iterative method for the supercavity shape is designed to deal with the effect of compressibility on the supercavity shape, pressure drag coefficient and density field. By this method, the very low cavitation number can be computed. The calculated results agree well with the experimental data and empirical formula. At the subsonic condition, the fluid compressibility will make supercavity length and radius increase. The supercavity expands, but remains spheroid. The effect on the first 1/3 part of supercavity is not obvious. The drag coefficient of projectile increases as the cavitation number or Mach number increases. With Mach number increasing, the compressibility is more and more significant. The compressibility must be considered as far as the accurate calculation of supercavitating flow is concerned.     

基于频域搜索的梳状谱信号检测方法

由于梳状谱信号多普勒容限较小,利用常规的匹配/相关检测方法进行检测时,需要较大数量的拷贝信号与计算量。针对这一问题,本文提出一种基于频域搜索的梳状谱信号检测算法。通过利用梳状谱信号频域多峰结构的特点,根据信号的先验信息计算出不同径向速度下回波信号的频点分布,对接收的信号在频域进行搜索累计的方法同时实现信号的检测与速度估计。仿真分析证明了本文算法的有效性。     

井流消能在水库溢洪道改造中的运用探索

结合汤泉水库溢洪道改造工程,介绍井流消能理论及其应用。针对模型试验中发现的问题,提出解决问题的对策,最终,形成消能效果最佳的超典型井流流态。为该技术成果的推广应用积累经验,希望将有更多的工程采用这一高效能、低造价的消能方式。     

DC01型电动列车牵引控制单元及其插件板微机检测装置

介绍了上海轨道交通DC01型电动列车牵引控制单元及其插件板微机检测装置的检测原理和软硬件结构。阐述了工控主机、电气控制箱等硬件设计,以及检测装置软件的主程序模块设计、插件板检测程序设计、静态程序设计等软硬件方面所需要解决的关键技术及其实现方法。该装置的研制运用提高了牵引控制单元系统及其插件板的检修质量和检修效率。