Fatigue crack growth behaviour of A5083 series aluminium alloys and their welded joints

We investigated the difference in fatigue behaviour between the aluminium alloys A5083-O and A5083-H321, which are used as structural components in ships and high speed craft. We obtained S–N curves for the base materials and the welded joints made of A5083-O. The relationships between the fatigue crack propagation rates and the stress intensity factor ranges ΔK, ΔK _eff and ΔK _RPG (Toyosada et al. in Int J Fatigue 26(9):983–992, 2004) were determined. Additionally, the evolution of fatigue crack growth for the base materials and the welded joints made of A5083-O was measured. We also carried out numerical simulations of fatigue crack growth for both base metals and their welded joints made of A5083-O. The difference in fatigue crack growth behaviour for each alloy and the validity of the numerical simulations of fatigue crack growth based on the RPG stress criterion (Toyosada et al. 2004) in the base materials and their welded joints was investigated.     

Piracy and armed robbery against ships today

This paper sets out the nature, scale and geographical locations of attacks against vessels today. Numerous examples in the paper highlight the worldwide nature of these attacks, the violence and differences in modus operandi and targets. The information is drawn from the International Maritime Bureau’s (IMB) Piracy Reporting Centre in Kuala Lumpur. Against this background, it briefly discusses issues of definition and response, including some technological devices, which can help locate hijacked vessels and deter unlawful boarding. The paper concludes with some practical thoughts on dealing with international crime, the victims of which, through the nature of their work have to travel beyond national boundaries, and so do not always attract the support of and commitment from national governments and law enforcement agencies where the attacks take place.     

Broaching prediction in the light of an enhanced mathematical model,with higher-order terms taken into account

 We have attempted to develop a more consistent mathematical model for capsizing associated with surf-riding in following and quartering waves by taking most of the second-order terms of the waves into account. The wave effects on the hull maneuvring coefficients were estimated, together with the hydrodynamic lift due to wave fluid velocity, and the change in added mass due to relative wave elevations. The wave effects on the hydrodynamic derivatives with respect to rudder angles were estimated by using the Mathematical Modelling Group (MMG) model. Then captive ship model experiments were conducted, and these showed reasonably good agreements between the experiments and the calculations for the wave effects on the hull and the rudder maneuvring forces. It was also found that the wave effects on restoring moments are much smaller than the Froude–Krylov prediction, and the minimum restoring arm appears on a wave downslope but not on a wave crest amidship. Thus, an experimental formula of the lift force due to the heel angle of the ship is provided for numerical modelling. Numerical simulations were then carried out with these second-order terms of waves, and the results were compared with the results of free-running model experiments. An improved prediction accuracy for ship motions in following and quartering seas was demonstrated. Although the boundaries of the ship motion modes were also obtained with both the original model and the present one, the second-order terms for waves are not so crucial for predicting the capsizing boundaries themselves. Received: June 20, 2002 / Accepted: October 10, 2002 Acknowledgments. This research was supported by a Grant-in-Aid for Scientific Research of the Ministry of Education, Culture, Sports, Science and Technology of Japan (No. 13555270). The authors thank Prof. N. Rakhmanin of the Krylov Ship Research Institute for providing the Russian literature, as well as Mr. H. Murata of NHK (Japan Broadcasting Corporation) for translating it into Japanese. Address correspondence to: N. Umeda (e-mail: umeda@naoe.eng.osaka-u.ac.jp)     

Flow resistance characteristics of water in narrow annulus during heat exchange

Considering the special resistance characteristics of fluids flowing through ducts with small gaps, experiments are per-formed to investigate the resistance characteristics of single-phase water, which is forced to flow through vertical annuli. The gap sizes are 0.9, 1,4 and 2.4ram, respectively. The experiments are conducted under condition of 1 atm. The water in the annuli is heated by high temperature water reversely flowing through the inner tube and the outer annulus. The results show that the flow pattern begin to change from laminar to turbulent before Reynolds number approaches 2000, the flow resistance in annulus has llttie relations with the temperature difference and ways of being heated, but mainly depends on the ratio of mass flux to the width of annulus.     

Multi-path planning algorithm based on fitness sharing and species evolution

A new algorithm is proposed for underwater vehicles multi-path planning. This algorithm is based on fitness sharing genetic algorithm, clustering and evolution of multiple populations, which can keep the diversity of the solution path, and decrease the operating time because of the independent evolution of each subpopulation. The multi-path planning algorithm is demonstrated by a number of two-dimensional path planning problems. The results show that the multi-path planning algorithm has the following characteristics: high searching capability, rapid convergence and high reliability.     

Dynamic analysis of multibodies system with a floating base for rolling of ro-ro ship caused by wave and slip of heavy load

Common effect of wave and slip of internal heavy load will make rolling of the roll-on ship serious. This is one of the important reasons for overturn of ro-ro ships. The multibodies System with a floating base is composed of ro-ro ship and slipping heavy load. This paper takes the rolling angle of the ship and the transverse displacement of the heavy load on desk as two freedoms. Making use of analysis of apparent gravitation and apparent buoyaney, the wave rolling moment is derived. By use of dynamic method of multibodies system with a floating base, dynamic equations of the system are established. Taking a certain channel ferry as an example, a set of numerical calculation have been carried out for rolling response of the ship and displacement response of the slipping heavy load under common effect of synchro-slipping heavy loads and wave.     

Study of algorithms of new slender ship theory of wave resistance

In this paper, Noblesse‘s New Slender-Ship Wave-Making Theory was investigated numerically. Detailed expressions of zeroth and 1st order wave resistance have been derived and calculation programs have also been compiled. In the single and double integral terms of Green function, the kernel function of wave resistance expression, special function expansion method and Chebyshev polynomials approach have been adopted respectively, which greatly simplify the calculation and increase the convergence speed.     

Hydrodynamics study of a BCF mode bioinspired robotic-fish underwater vehicle using Lighthill’s slender body model

This paper investigates the hydrodynamic characteristics of the rectilinear motion of a robotic fish underwater vehicle. This 2-joint, 3-link multibody vehicle model is biologically inspired by a body caudal fin carangiform fish propulsion mechanism. Navier–Stokes equations are used to compute the unsteady flow fields generated due to the interaction between the vehicle and the surrounding incompressible and Newtonian fluid (water) environment. The NACA 0014 airfoil aerodynamic profile has been designed to boost the swimming efficiency by reducing drag as the vehicle undergoes an undulatory/oscillatory motion. Using the Lighthill slender body model, a traveling wave mathematical function is defined to undulate the robotic fish posterior (caudal) region while the motion tracking is carried out by dynamic meshing technique. The results obtained show that though the net lift force approaches to zero, the net thrust or negative drag coefficient maintains a finite value dependent on kinematic parameters like tail beat frequency (TBF) and amplitude span (AS) at a given propulsive wavelength and the forward velocity of the vehicle. The results reveal the effects of TBF and AS on the coefficient of drag friction and the thrust force. Drag coefficients obtained from the simulations are compared and validated with the experimental results. The hydrodynamic results are found to be similar to the kinematic study results and suggest that TBF and AS play the most effective roles in the bioinspired propulsion technique. Relation of these parameters with propelling thrust force and forward velocity is also in conjunction over a given range of TBF and AS values.     

Experimental investigations on a low frequency horizontal pendulum ocean kinetic energy harvester for underwater mooring platforms

In the interest of extending the operation time of underwater mooring platforms, it is promising and feasible to harvest energy from ocean. A low frequency horizontal pendulum ocean kinetic energy harvester for underwater mooring platforms was presented in this paper. Several series of experimental tests on energy harvesting were carried out. The present research investigates the influence of parameters including excitation frequency, excitation amplitude, inertia modification (ballasting) and pendulum rod length, on the energy harvesting performance. Results show that this type of horizontal pendulum energy harvester has the best performance at resonant frequencies 0.2, 0.25 and 0.3 Hz, with the pendulum pitch angle 3°, 4° and 5°, respectively. It is indicated that the energy harvester can slightly tune the natural frequency to meet the prominent excitation frequency through varying the pendulum pitch angle. The test results also show that the optimal output power take off damping is 30 or 40 Ω in most case, and the maximum average output power can reach 0.3 W, with high normalized power density of 3453.8 kg/m³. Similarly, the results show that three parameters, excitation amplitude, inertia modification (ballasting), and pendulum rod length, have a significant influence on the energy harvesting. This work constitutes a preliminary step towards the development of a low frequency horizontal pendulum ocean kinetic energy harvester for underwater mooring platforms.     

Broaching probability for a ship in irregular stern-quartering waves: theoretical prediction and experimental validation

To avoid stability failure due to the broaching associated with surf riding, the International Maritime Organization (IMO) has begun to develop multilayered intact stability criteria. A theoretical model using deterministic ship dynamics and stochastic wave theory is a candidate for the highest layer of this scheme. To complete the project, experimental validation of the theoretical method for estimating broaching probability in irregular waves is indispensable. We therefore conducted free-running model experiments using a typical twin-propeller and twin-rudder ship in irregular waves. A simulation model of coupled surge–sway–yaw–roll motion was simultaneously refined. The broaching probability calculated by the theoretical method was within the 95 % confidence interval of that obtained from the experimental data. This could be an example of experimental validation of the theoretical method for estimating the broaching probability when a ship meets a wave.