RECENT DEVELOPMENT OF PROCESS SIMULATION AND ITS APPLICATIONS TO MANUFACTURING PROCESSES

l.IntroductionThemostboortantdrivingforceinmanufacturillistoPrOduCeabetterPrOductatalowercost.GenerallyeffecthemethodsinchideshOrtenintheleadtiminthedesigncyCle,andredUcinthetoolingcostandmaChinedOWnmeatProductionst4e.AllOfthemrewtabettertmderstandingofhO…     

Influence of load and inflation pressure on the tyre rolling resistance

Tyre load and inflation pressure are important factors controlling rolling resistance of road vehicles. The article presents results obtained in the Technical University of Gdańsk during laboratory and road measurements of different car tyres rolling on different pavements. The knowledge of rolling resistance characteristics is important for modelling car dynamics as well as fuel consumption. It is also necessary to establish proper test conditions in the future standardized on-road method of measuring rolling resistance. The results indicate that while an increase of load always leads to the increase of rolling resistance force, the influence on Coefficient of Rolling Resistance is more complicated and unpredictable. They also indicate that tyres with high rolling resistance are more sensitive to inflation pressure changes than low rolling resistance tyres.     

Correcting injection pressure maladjustments to reduce NOX emissions by marine diesel engines

Emissions from the exhausts of marine diesel engines comprises several different gases including NO_X. These are currently regulated at the international level under Regulation 13 of ANNEX VI of MARPOL 73/78, but this regulation only applies to new engines and is based on bench tests, for only a single engine designated the “parent engine”. Here, the need to take measurements from across their whole range and once in operation on board a vessel is examined. This would not only improve assessment of new equipment against the current regulation, but would also detect defects in the functioning of the engine.     

Challenges and Prospects of Fisheries Co-Management under a Marine Extractive Reserve Framework in Northeastern Brazil

In Brazil, Marine Extractive Reserves—MERs (Reservas Extrativistas Marinhas) represent the most significant government-supported effort to protect the common property resources upon which traditional small-scale fishers depend. From an initial small-scale experience in 1992, MERs have expanded countrywide, now encompassing 30 units (9,700 km²) and nearly 60,000 fishers. Despite such escalating interest in the model, there is little research on the effectiveness of MERs. In this article, we discuss relevant parts of the history and examine the current situation of the fisheries co-management initiative in the Marine Extractive Reserve of Corumbau, which was created in 2000 as the first MER to encompass coral reefs and reef fisheries. We describe the Extractive Reserve co-management arrangement and its main policy and legislative challenges. Finally, we discuss the prospects for the use of MERs as management frameworks for traditional small-scale fisheries in Brazil.     

Seasonality of picophytoplankton chlorophyll a and biomass in the central Cantabrian Sea, southern Bay of Biscay

Seasonal changes in the abundance and biomass of cyanobacteria (Synechococcus and Prochlorococcus) and picoeukaryotes were studied by flow cytometry in the upper layers of the central Cantabrian Sea continental shelf, from April 2002 to April 2006. The study area displayed the typical hydrographic conditions of temperate coastal zones. A marked seasonality of the relative contribution of prokaryotes and eukaryotes was found. While cyanobacteria were generally more abundant for most of the year (up to 2.4 10⁵ cells mL^− 1), picoeukaryotes dominated the community (up to 10⁴ cells mL^− 1) from February to May. The disappearance of Prochlorococcus from spring through summer is likely related to shifts in the prevailing current regime. The maximum total abundance of picophytoplankton was consistently found in late summer–early autumn. Mean photic-layer picoplanktonic chlorophyll a ranged from 0.06 to 0.53 µg L^− 1 with a relatively high mean contribution to total values (33 ± 2% SE), showing maxima around autumn and minima in spring. Biomass (range 0.58–40.16 mg C m^− 3) was generally dominated by picoeukaryotes (mean ± SE, 4.28 ± 0.27 mg C m^− 3) with an average contribution of cyanobacteria of 30 ± 2%. Different seasonality of pigment and biomass values resulted in a clear temporal pattern of picophytoplanktonic carbon to chlorophyll a ratio, which ranged from 10 (winter) to 140 (summer). This study highlights the important contribution of picoplanktonic chlorophyll a and carbon biomass in this coastal ecosystem.     

A new methodology for incident detection and characterization on surface streets

In this paper, a new methodology is presented for real-time detection and characterization of incidents on surface streets. The proposed automatic incident detection approach is capable of detecting incidents promptly as well as characterizing incidents in terms of time-varying lane-changing fractions and queue lengths in blocked lanes, lanes blocked due to incidents, and incident duration. The architecture of the proposed incident detection approach consists of three sequential procedures: (1) Symptom Identification for identification of incident symptoms, (2) Signal Processing for real-time prediction of incident-related lane traffic characteristics and (3) Pattern Recognition for incident recognition. Lane traffic counts and occupancy are the only two major types of input data, which can be readily collected from point detectors. The primary techniques utilized in this paper include: (1) a discrete-time, nonlinear, stochastic system with boundary constraints to predict real-time lane-changing fractions and queue lengths and (2) a pattern-recognition-based algorithm employing modified sequential probability ratio tests (MSPRT) to detect incidents. Off-line tests based on simulated as well as video-based real data were conducted to assess the performance of the proposed algorithm. The test results have indicated the feasibility of achieving real-time incident detection using the proposed methodology.     

Scheduling short-term marine transport of bulk products

A multinational company uses a personal computer to schedule a fleet of coastal tankers and barges transporting liquid bulk products among plants, distribution centres (tank farms), and industrial customers. A simple spreadsheet interface cloaks a sophisticated optimization-based decision support system and makes this system useable via a varity of natural languages. The dispatchers, whose native language is not English, and some of whom presumably speak no English at all, communicate via the spreadsheet, and view recommended schedules displayed in Gantt charts both internationally familiar tools. Inside the spreadsheet, a highly detailed simulation can generate every feasible alternate vessel employment schedule, and an integer linear set partitioning model selects one schedule for each vessel so that all loads and deliveries are completed at minimal cost while satisfying all operational requirements. The optimized fleet employment schedule is displyed graphically with hourly time resolution over a planning horizon of 2-3 weeks. Each vessel will customarily make several voyages and many port calls to load and unload products during this time.