基于线路层次的城市轨道交通网络末班车衔接优化研究

在城市轨道交通网络化运营和"一票制换乘"的背景下,制定合理的网络末班车衔接方案,满足末班车时段乘客出行需求,是当前城市轨道交通运营管理面临的重要问题。以在网络换乘站成功搭乘末班车的乘客数量最大化为目标,建立了网络末班车衔接优化模型,并设计了线路分层递进衔接优化算法求解该模型。以广州城市轨道交通网络为例,采用所提出的模型和算法进行了末班车衔接优化方案的计算。     

Research on the Influence of Vertical Deformation of Bridge on the Track RegularityEI北大核心

Research purposes: The vertical deformation of high-speed railway (HSR) bridge will cause the track irregularity, which threatens the safe and efficient operation of the HSR. Taking the 32 m simple supported beam bridge as the research object, based on the existing mapping analytical model for bridge vertical deformation and rail geometry, the influence of the track regularity of the CRTS Ⅰ slab ballastless track structure caused by the key parameters such as the bridge vertical deformation amplitude, the hanging length of the beam end and the vertical stiffness of mortar layer were studied, and the corresponding measures to control the rail deformation were proposed, to provide theoretical reference for comprehensive treatment of rail deformation of HSR bridge. Research conclusions:(1) The pier settlement, the vertical rotation of the beam end and the beam fault will cause the rail to follow the beam deformation, and "up-warping" of the rail on the vertical deformation boundary will appear. (2) The rail deformation is directly proportional to the vertical deformation amplitude of the bridge and the key to control the rail deformation is to reduce the vertical deformation of the bridge. (3) The rail deformation can be controlled by reducing the hanging length of beam and vertical stiffness of mortar layer. (4) The research results can provide a theoretical reference for controlling the vertical rail deformation of high-speed railway bridges. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.     

The Reinforcement Analysis of Prestressed Anchor Frame Beam in the Deep Cutting Slope under Three Dimensional Strong EarthquakeEI北大核心

Research purposes: In order to further study the reinforcement of prestressed anchor frame beam in the deep cutting slope under three dimensional strong earthquake, a model of the deep cutting slope is built through FLAC 3D simulation software, the seismic wave to the model from three directions of x,y and z is input, and the dynamic response of the slope is analyzed. Then, the prestressed anchor frame beam reinforcement measures are applied to the model, and this paper analyzes the reinforcement effect of the prestressed anchor frame beam to the deep cutting slope under three dimensional strong earthquake. Research conclusions:(1) The prestressed anchor frame beam has a good effect on restraining the horizontal displacement of the deep cutting slope. (2) Under the three dimensional strong earthquake, the prestressed anchor frame beam has a good effect on the horizontal acceleration and horizontal velocity of the deep cutting slope, which reduces the peak of horizontal acceleration and horizontal velocity. (3) Through the comparison of the response before and after the reinforcement of the prestressed anchor frame beam is given under the 9 degrees three dimensional strong earthquake, it can be concluded that the prestressed anchor frame beam can provide good reinforcement effect to the deep cutting slope. (4) This research can be used for reference to the earthquake resistance of the slope engineering. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.     

正交试验下槽形梁桥瞬态噪声影响分析

为了探讨结构参数对桥梁结构噪声的影响,以某拟建轨道交通槽形梁为研究对象,选取桥梁支座刚度、桥梁阻尼比、桥梁结构刚度3个影响因素,结合有限元-瞬态边界元理论,对其进行正交分析。研究结果表明:轨道交通槽形梁结构瞬态辐射噪声对桥梁结构阻尼和结构刚度的改变较为敏感,随着桥梁结构阻尼参数和结构刚度系数的增大,声场最大线性声压级逐渐减小;在结构辐射噪声近声场处,桥梁结构刚度对槽形梁结构噪声影响较为显著;在结构辐射噪声远声场处,桥梁阻尼比对槽形梁结构噪声影响较为显著;应当有针对性地对桥梁结构噪声影响参数进行优化,从而改善桥梁结构噪声性能。     

旅客列车过站径路优化模型与算法

在给定铁路客运站站形布局和列车运行图的前提下,研究旅客列车过站径路优化问题。过站径路由列车的接车作业进路、占用的到发线和发车作业进路拼接而成。以旅客列车的接发车作业进路为决策,以道岔和到发线占用相容性为约束,以最大化接发车作业进路效用和到发线运用效用为优化目标,建立旅客列车过站径路优化的0-1规划模型。设计基于极大列车过站径路方案k剔除邻域系的模拟退火算法。以某客运站为例验证该模型和算法的合理性。结果表明:模型对实际问题的描述准确,算法效率较高,适用于求解大规模铁路客运站旅客列车过站径路优化问题。     

曲线对高速货车转向架焊接部件疲劳损伤的影响

依据UIC510—3:1994规定的疲劳试验加载方法,基于有限元法研究了不同左右曲线变换次数取值时高速货车转向架焊接构架及摇枕疲劳关注部位累积损伤的变化程度及规律。仿真结果及综合分析表明,当左右曲线变换次数取值变化并不十分显著时,其对结构疲劳损伤影响很小,样机疲劳试验中可直接应用UIC规范中的建议值。     

基于SYSNOISE软件的地铁车辆车内声场模态分析

以A型地铁车辆为研究对象,利用SYSNOISE软件计算了车内声场的声学模态。结果表明,车内声场的各阶模态形状基本上呈前后、左右和上下方向对称分布,车内声场共鸣频率和模态形状主要由其几何形状决定。     

JC型弹性旁承体安装时侧翼橡胶层应力分析

对目前货车转向架装用的JC型双作用弹性旁承体进行了非线性有限元计算,分析了旁承体两侧翼橡胶层在安装及工作时的应力,给出了JC型双作用弹性旁承体在安装时的相关建议。     

轴向组合式小径向/轴向刚度比橡胶球铰结构介绍

以一种地铁车辆用转臂定位节点为例,介绍了一种轴向组合式橡胶-金属球铰结构,此种结构的特点是径向/轴向刚度比小,橡胶预压缩简单可靠,刚度调节范围广,疲劳可靠性好.     

出口马达加斯加米轨转向架的研制

介绍了出口马达加斯加米轨转向架的主要技术参数、结构特点及有关计算和试验情况.