硅胶吸附管采集甲醇汽车尾气排放中甲醇的方法研究

文章主要研究了利用硅胶吸附管采集甲醇汽车尾气排放中甲醇的方法,对硅胶吸附管的规格、待测样品的浓度、采样参数等进行了详细的讨论及验证。研究表明,利用硅胶吸附管采集甲醇的过程中,很容易发生甲醇的穿透。随着硅胶颗粒装填数目的增加,甲醇的穿透率降低,实际吸附甲醇的效率增加。在采样流量相同时,待测样品浓度越高,甲醇的穿透率越高。在待测样品浓度相同时,采集流量越高,甲醇的穿透率越高。将硅胶吸附管串联,可以有效减少甲醇的穿透,提高吸附效率。     

船舶小组立装焊作业单元CPS系统研究与应用

当前船厂小组立装焊作业过程存在作业任务信息无法直接传递至现场,现场实际执行的状态信息无法及时反馈等问题,导致装焊作业混乱、装焊效率低下.为了解决上述问题,针对船舶小组立装焊作业单元进行研究,构建基于信息物理融合(CPS)的智能制造系统.首先分析了小组立装焊作业流程;然后梳理了装焊作业任务数据,构建了小组立装焊作业数据模型,并在此基础上,完成了基于物联网的CPS框架设计以及系统功能开发,实现了对装焊作业过程的有效监控;最后将该系统应用于某船厂小组立装焊现场,有效规范了装焊作业过程,提高了装焊效率.     

Characteristics analysis for travel behavior of transportation hub passengers using mobile phone data

The travel behavior of passengers from the transportation hub within the city area is critical for travel demand analysis, security monitoring, and supporting traffic facilities designing. However, the traditional methods used to study the travel behavior of the passengers inside the city are time and labor consuming. The records of the cellular communication provide a potential huge data source for this study to follow the movement of passengers. This study focuses on the passengers’ travel behavior of the Hongqiao transportation hub in Shanghai, China, utilizing the mobile phone data. First, a systematic and novel method is presented to extract the trip information from the mobile phone data. Several key travel characteristics of passengers, including passengers traveling inside the city and between cities, are analyzed and compared. The results show that the proposed method is effective to obtain the travel trajectories of mobile phone users. Besides, the travel behavior of incity passengers and external passengers are quite different. Then, the correlation analysis of the passengers’ travel trajectories is provided to research the availability of the comprehensive area. Moreover, the results of the correlation analysis further indicate that the comprehensive area of the Hongqiao hub plays a relatively important role in passengers’ daily travel.

     

LNG船生产技术准备工作的组织管理

生产技术准备工作在整个船舶的经营建造过程中处于承上启下的关键阶段,该项工作的完善与否决定着船舶建造过程是否顺利。国内某船厂通过在液化天然气(Liquefied Natural Gas,LNG)船多年建造过程中的深耕细作,在船厂及船东等外方的项目组织结构建设及相应的沟通机制上形成一套制度。在编制各类作业计划时对业务环节进行评估分解,深化计划管理和计划体系建设。通过高效的沟通机制和监控制度促进各项生产技术准备工作有序推进;采取建造管理对策表的形式,对建造过程中的各类重点、难点问题进行集中管理和组织推进,有效地缩短了LNG船的生产技术准备周期,并做到不断突破,形成一套有特色且可推广的管理经验,对其他船型的生产技术准备的组织实施有极强的借鉴意义。     

外海长周期波浪作用下的斜坡堤结构设计

长周期涌浪和风浪的混合浪具有周期长、波能大的特点，该种环境下的斜坡堤结构设计不能简单地参照现行规范执行。依托某已建工程，采用计算及理论分析对其设计过程和物理模型试验验证过程进行对比分析，得出适用于外海长周期混合浪作用下的斜坡堤结构设计要点。结果表明，外坡护面块体的选用和防浪墙顶高程确定等设计需要额外考虑经验系数；墙后堤顶和堤后斜坡需要格外加强，堤顶尽量选用合适的防浪墙结构形式；现行规范的护底块石计算公式在浅水条件下并不适用。     

电子车辆识别技术的性能、安全性和成本分析及应用

电子车辆识别(EVI)是利用电子信号对车辆进行自动识别和监测的技术.随着RFID技术的不断发展,EVI应用的领域和范围不断扩大,这对EVI的性能、安全性和成本提出了更高的要求.     

Hybrid process of fabricating high-quality micro wine-glass fused silica resonators

A new hybrid method, which combines improved glass-blown technology with wet etching, is reported to fabricate micro wine-glass resonators with high-quality fused silica. The optimum placement is compared to achieve the resonators with good shell shape. The typical shell diameter is about 4mm and its thickness covers from dozens to hundreds of micrometers. The etching rates in corrosion solutions with different ratios and at different thicknesses of hemispherical shells are studied. We also conclude how to precisely control the thickness. The corrosion solutions with different ratios of HF solution to NH₄F solution make the spherical shells rougher in different degrees. The best roughness is 0.581 nm in the 1: 8 ratio corrosion solution while the original roughness is 0.537 nm. This fact shows that the resonator remains atomically smooth surface. Based on the glassblowing spherical fused silica structure, the thickness of the resonator is effectively controlled by buffered oxide etch (BOE) technology according to the measured etching rate. The measured resonant frequency of the hemispherical shell at ambient pressure and room temperature is 1.75 kHz of rocking mode which is close to the simulated frequency. Using such a low-cost hybrid approach, we can fabricate high-quality microscale resonators in batch.     

Impacts of urban built environment on empty taxi trips using limited geolocation data

This study identifies the determinants of the empty taxi trip duration (ETTD) by combining three high-resolution databases—geolocation data in New York City, geodatabase of urban planning data, and transportation facilities data. Considering the nature of duration data, hazard-based duration model is proposed to explore the relationships between causal factors and ETTD, coupling with three variations of baseline hazard distribution, i.e., Weibull distribution with heterogeneity, Weibull distribution, and log-logistic. Furthermore, the likelihood ratio test is presented to implement comparisons of three baseline hazard distributions, as well as spatial and temporal transferability of causal factors. The results show significant complementary effects by subway system and competitive effects by city bus and bicycling system, as well as significant impacts of trip length, airport trip, average annual income, and employment rate. Urban built environment, for instance, density of road, public facilities, and recreational sites and ratio of green space, has various impacts on ETTD. The elasticity estimations confirm significant spatial and temporal heterogeneity in impacts on ETTD. In addition, the analysis on elasticity also reveals the considerable impacts of severe traffic congestion on ETTD within Manhattan. The modeling can assist stakeholders in understanding empty taxi movements and measuring taxi system efficiency in urban areas.     

Estimation of delay variability at signalized intersections for urban arterial performance evaluation

Urban arterial performance evaluation has been broadly studied, with the major focus on average travel time estimation. However, in view of the stochastic nature of interrupted flow, the ability to capture the characteristics of travel time variability has become a critical step in determining arterial level of service (LOS). This article first presents a stochastic approach that integrates classic cumulative curves and probability theories in order to investigate delay variability at signalized intersections, as a dominant part of the link travel time variability. This serves as a basis for arterial travel time estimation, which can be obtained through a convolution of individual link travel time distributions. The proposed approach is then applied in the estimation of travel time along one arterial in Shanghai, China, with abundant automatic vehicle identification (AVI) data sources. The travel time variability is evaluated thoroughly at 30-min intervals, with promising results achieved in comparison to the field measurements. In addition, the estimated travel time distributions are utilized to illustrate the probability of multiple LOS ranges, namely, reliability LOS. The results provide insights into how we might achieve a more reliable and informative understanding of arterial performance.