基于汽车保险数据评价乘用车安全性方法研究

文章结合国内外汽车安全技术的发展,选择与设定主动安全、被动安全、耐撞性与维修经济性三方面评价车辆安全性能的具体指标,并基于交通事故环境挖掘了人、时间、地域等影响安全评价的其他因素;利用层次分析法与专家调研法,确定评价车辆安全性能指标的权重,构建出评价车辆安全性能的有效算法,并分析了算法的可行性;基于某大型保险公司201...     

Outlier Rejecting Multirate Model for State Estimation

IntroductionMeasured data is often contaminated by noisein state estimation.Kalman filter is a powerfultool for signal extracting.It is especially efficientin estimating spatially inhomogeneous signal whenthe noise is Gaussian.Due to process noise or non-stationary environment,the measured data is usu-ally corrupted by outliers.The performance is de-graded seriously.Generally,there are two kinds ofapproaches to handle this problem.Outlier can bedetected based on renovation[1],then be replace…     

混合动力汽车发展的必要性及关键技术分析

混合动力汽车综合了内燃机驱动式汽车及电动机驱动式汽车的二者优势,具有环保、节油的特点,得到了各国的广泛重视.文章主要阐述了混合动力汽车的发展现状,分析了混合动力汽车发展的必要性,并结合混合动力汽车应用的特点,分析了影响混合动力汽车性能的关键性技术.     

Tool for Predicting the Ultimate Bending Moment of Ship and Ship-Shaped Hull Girders

The present paper presents a historical review associated with the research works on hull girder strength of ship and ship-shaped structures. Then, a new program is developed to determine the ultimate vertical bending moment of hull girder by applying direct method, stress distribution method, and progressive collapse analysis method. Six ships and ship-shaped structures used in the benchmark study of International Ship and Offshore Structures Congress (ISSC) in 2012 are adopted as examples. The calculation results by applying the developed program are analyzed and compared with the existing results. Finally, the roles of the developed program and its further development are discussed.     

基于FPGA的单端行波故障测距系统的设计与实现

针对现有的10 k V输电线单端行波故障测距理论,提出了一种基于Cyclone IV系列FPGA芯片EP4CE15F17C8N的软硬件实现方案。采用FPGA自顶向下模块化思想,设计了行波故障测距系统,采用AD7356进行高速数据采集,通过改进的凯伦鲍尔矩阵进行相模变换,用FIR滤波器IP核进行小波变换求模极大值,最后根据模极大值的极性选择测距公式计算故障距离。通过时序仿真和板级测试表明,该方案设计时序稳定,且定位精度高、实时性强。     

格拉斯磁环匀强磁场分析

以毕奥-萨伐尔定律为基础,建立亥姆霍兹线圈以及格拉斯磁环中心磁场分布模型,并计算了它们内部的轴向磁感应强度分布,绘出了空间分布图,分析了轴向磁感应强度与x、y坐标的关系,分析结果得到了亥姆霍兹线圈和格拉斯磁环内部匀强磁场分布区域,通过比较得到格拉斯磁环内部的匀强磁场区域比亥姆霍兹线圈内部的匀强磁场分布区域更大的结论。     

高职院校“顶岗实习”问题探析

文章深入分析了高职院校在＂顶岗实习＂中存在的问题,并从教育动员、提高专业对口率、加强实习指导、构建管理网络平台等方面提出了相应的解决措施,具有一定的指导意义。     

50000 DWT级散货船轮机设计特点

主要介绍了50 000 DWT散货船轮机设计特点,通过选用大缸径柴油机提升经济性,申请螺旋桨轴状态监控(SCM)和轮机循环检验(CMS)附加符号减少船东使用成本,可供内贸散货船设计借鉴.最后对此船型后续优化提出了建议,从降低上层建筑风阻、采用TIER Ⅱ主机,进一步提升节能环保性.     

Dynamic Behavior of Two Part Towing Cable System During Turning

An improved numerical method is used to simulate the dynamic behavior of a two part towing cable systems during turnings. In U turns and full turns, periodical heave motions are found both for the towed vehicle and for the depressor. Periodic motions of the subsea units and of the cable surface tension are closely related to the turning parameters, such as turning velocity and turning radius. System parameters, such as length of the second cable and the vehicle hydrodynamics, also damp turning instability.     

基于母线并联元件模型的船用中频系统潮流计算与实验验证

针对宽幅压变化的直流电机驱动通风机速度性能差的情况,在不需要速度闭环的前提下,为电机所带风阻性负载稳速准确度在10%以内,设计出了一种稳速装置。基本能满足此类电机负载的要求。文章介绍了稳速装置的工作原理和设计方法,通过实验验证可对直流通风电机进行有效控制。