2和4的方程式

尽管中国曾经号称"自行车王国",但如今能为我们界定为自行车专家的人却并不算多。因为90%还在骑车的人不过是被迫仍然使用这种廉价的代步工具而已,而另一些人则在"升级"为四轮之后就患上了"汽油依赖症"。只有经历过从两轮到四轮,再重新回到两轮的资深人士,才有资格和我们一起计算这个算式……     

Second-order sum-frequency wave diffraction by a truncated surface-piercing cylinder in bichromatic waves

This work considers the second-order sum-frequency diffraction problem for a stationary truncated surface-piercing circular cylinder in bichromatic waves. The solution method was based on a semianalytical formulation of the second-order sum-frequency diffraction potential. The boundary conditions were properly satisfied by introducing the “locked” and the “free” wave components of the nonlinear velocity potential. The method was validated by comparing the calculated results with numerical data previously reported by other authors. Particular attention was paid to the second-order sum-frequency heave forces and the change in the wave run-up configuration due to the existence of the lower fluid domain underneath the truncated cylinder.     

The ISM Code and the ISPS Code: A critical legal analysis of two SOLAS regimes

Within the comprehensive body of law encompassed by the International Convention on Safety of Life at Sea, 1974 (SOLAS), there are two regimes that are topical and outstanding in the current maritime milieu. These are the international safety management and the international ship and port facility regimes, both characterized by two codes serving as the centre of gravity of each, namely, the ISM Code and the ISPS Code, respectively. In this article the concept of the code as a legal instrument is perused following which a critical legal analysis is carried out of the two above-mentioned Codes, including their backgrounds, the evolutionary process culminating into the regimes and their interrelationships. Several anomalies and inadequacies in the two regimes are identified but in the final analysis it is concluded that both instruments are salutary additions to the body of convention law generated by the International Maritime Organization (IMO). They will undoubtedly influence the continuing development of international law in the field of maritime safety and security.     

Special issue: Importance of public transport

The transport demand in most major cities around the world can only be met with a high‐quality public transport system. The requirements on bus, rail, underground and tram systems are manifold with reliability and efficiency as the key factors. The service operating hours and the size of the network are often extended in order to serve the needs better. Further, most metropolitan areas are trying to provide more incentives for citizens to leave the car at home and use the local transit systems instead. The reasons are well known. Not only does a public transport system only make economical sense if it is well used, but most urban areas with a high car‐dependency face at least three major problems; safety, congestion, and pollution (noise and air pollution, land separation, etc.). It is generally recognised that to decrease car usage and to increase public transport usage a stick & carrot approach is needed. The London congestion‐charging scheme is an example since all revenues collected by the scheme are put into the improvement of bus and underground services.     

A capacity restraint transit assignment with elastic line frequency

This paper proposes a new formulation for the capacity restraint transit assignment problem with elastic line frequency, in which the line frequency is related to the passenger flows on transit lines. A stochastic user equilibrium transit assignment model with congestion and elastic line frequency is proposed and the equivalent mathematical programming problem is also formulated. Since the passenger waiting time and the line capacity are dependent on the line frequency, a fixed point problem with respect to the line frequency is devised accordingly. The existence of the fixed point problem has been proved. A solution algorithm for the proposed model is presented. Finally, a numerical example is used to illustrate the application of the proposed model and solution algorithm.     

Observations on colony formation by the cosmopolitan phytoplankton genus Phaeocystis

Few marine phytoplankton have heteromorphic life cycles and also often dominate the ecosystems in which they occur. The class Prymnesiophyceae contains a notable exception: the genus Phaeocystis includes three species that form gelatinous colonies but also occur within their ranges as solitary cells. Phaeocystis antarctica and P. pouchetii are exclusively high latitude taxa, and are notable for regionally tremendous blooms of the colony stage. P. globosa occurs circumglobally, yet its colony blooms primarily are confined to colder waters within its range. Three additional species are warm water forms that have been reported only as solitary cells or loose aggregations that bear little resemblance to the organized colonies of the other taxa. Interpretation of existing data indicates that resource availability (light, temperature and nutrients) by itself is not sufficient to explain this distinction between cold-water colony-forming taxa and warm water solitary cell taxa, nor why colony development in P. globosa is essentially a spatially restricted phenomenon within a much broader geographic range. Colony development by P. globosa in situ has been observed at temperatures ≥20 °C, but only rarely and generally under conditions of seasonally or anthropogenically elevated nutrient supply. Data presented here demonstrate colony development at 20–22 °C in natural plankton communities from oligotrophic waters that were pre-screened through 63 μm mesh (i.e. lacking mesozooplankton and large microzooplankton), but not in unscreened communities containing microzooplankton and >63 μm zooplankton. Reduction of colony proliferation at higher temperatures by mesozooplankton grazing remains as an intriguing possibility that is consistent with available evidence to help explain differences in latitudinal extent of in situ colony development. These data are interpreted within a theoretical framework regarding the potential advantages and disadvantages of the two life cycle stages.     

新一代车辆标准化的综合性和前瞻性

俄罗斯正在研制新一代车辆并进行车辆检修制度的改革。本文提出标准化工作的前瞻性和综合性,要求车辆与其部件具有等寿命、装卸和调车机械应适应车辆的性能等,这样在铁路行业就会产生巨大的经济效益。     

Prediction of fatigue life and estimation of its reliability on the parts of an air suspension system

Air suspension systems have been implemented in various commercial vehicles, such as buses and special purpose trucks, because of the comfortable ride and easy height control. An evaluation of the durability of vehicle parts has been required for service life and safety starting in the early stages of design. The cyclic load applied to the vehicle can cause fatigue failure of parts, such as the suspension frame. This paper presents a method to predict the fatigue life of the suspension frame at the design stage of the air suspension system used in a heavy-duty vehicle. To estimate the fatigue life using the SN method, the Dynamic Stress Time History (DSTH) is necessary for the part of interest. DSTH can be obtained from the results of the flexible body dynamic analysis using the Belgian road simulation and the Modal Stress Recovery (MSR) method. Furthermore, the reliability of the predicted fatigue life can be evaluated by considering the variations in material properties. The probability and distribution of the expected life cycle can be obtained using experimental design with a minimum number of simulations. The advantage of using statistical methods to evaluate the life cycle is the ability to predict replacement time and the probability of failure of mass-produced parts. This paper proposes a rapid and simple method that can be effectively applied to the design of vehicle parts.     

Auto-ignition and micro-explosion behaviors of droplet arrays of water-in-fuel emulsion

The characteristics of auto-ignition and micro-explosion behaviors of one-dimensional arrays of fuel droplets suspended in a chamber with high surrounding temperature were investigated experimentally with various droplet spacings, numbers of droplet and surrounding temperatures. The fuels used were pure n-decane and emulsified n-decane with varied water contents ranging from 10 to 30%. All experiments were performed under atmospheric conditions with high surrounding temperatures. An imaging technique using a high-speed camera was adopted to measure ignition delay, flame lifetime, and flame spread speed. The camera was also used to observe micro-explosion behaviors. As the droplet array spacing increased, the ignition delay also increased, regardless of water content. However, the lifetime of the droplet array decreased as the droplet spacing increased. The micro-explosion starting time remained unchanged regardless of the number of the droplets or the droplet spacing; however, it tended to be delayed slightly as the water percentage and droplet spacing increased.     

Development of an LIF image processing technique for measuring drop sizes in a pre-swirl spray

Depth of field effects in laser sheet imaging were considered for droplet sizing of a pre-swirl spray. A pre-swirl spray is formed before the hollow-cone type main-swirl spray from a D.I. gasoline injector, and shows transient characteristics with high axial velocity. A microscopic imaging technique was applied to obtain high spatial resolution LIF tomograms of the pre-swirl spray. A 1 mm thick Nd:YAG laser sheet was used as a light source to make the LIF tomograms that were imaged using a high-resolution CCD camera. The droplet sizing of the pre-swirl spray was carried out using an image processing technique. In the image processing procedure, the laser sheet-straddling large-sized droplets were carefully taken into account to remove the errors caused by the depth of field effects from the limited thickness and the energy distribution of the laser sheet. The mean intensity of the individual droplets and the line profile of the LIF signal around the droplet edge were inspected to screen the laser sheet-straddling large-sized droplets. In order to consider the effects of the size-dependent LIF signal intensity, the size-classified or ensemble-averaged mean intensity of the individual droplets was introduced. The mean droplet sizes such as AMD and SMD were calculated using only screened droplets, and they slightly increase before considering the depth of field effects.