基于最大匹配法的中文分词技术改进

在简介最大匹配法(MM)分词算法的基础上,指出了MM算法存在的不足,分析了MM改进分词算法的需求及过程设计,研究了MM改进分词算法以及过程处理原则,研究了改进算法过程中的歧义检测与切分、未登录词识别等问题,提出了消除策略和处理原则.     

应用广义拟余能原理研究流固耦合问题(英文)

水动力学与固体力学交叉的流固耦合理论是船舶与海洋工程结构响应分析与直接设计的重要工具.本文应用卷变积方法,按照广义力和广义位移之间的对应关系,将弹性动力学的基本方程卷乘上相应的虚量,然后积分,代数相加,并考虑到体积力和面积力均为伴生力,建立了非保守系统初值问题的两类变量的广义拟余能原理.应用广义拟余能原理研究流固耦合问题,分析了结构的动力响应,给出同时求解力类量和位移类量两类变量的计算方法.     

确定性联合补充库存问题的EXCEL规划求解法

提出求解确定性联合补充库存问题的新方法——EXCEL规划求解法：通过数学运算将非线性混合整数规划模型转化为整数线性规划模型,然后在EXCEL中通过“规划求解”工具求最优解．通过算例验证,结果表明该方法不但能有效解决此类问题,而且更简单、更直观、更实用．     

盾构施工筹划原则及影响因素分析

以北京地铁4号线11合同段(灵境胡同-新街口)四站三区间的盾构施工筹划为例,重点分析影响盾构施工筹划的因素;以方案比较的方法,介绍了确定三区间总体筹划方案的详细过程.     

Property Evolution of Sulphoaluminate Grouting Material under Pressure Circulation北大核心CSCD

Water-sealed underground oil tank projects are quite different from traditional underground projects since the water-sealing conditions are very strict and the difficulties caused by the geological specificity, structural specificity and construction specificity are key factors affecting the project. In light of the significant early initial setting time and rapid temperature increase of sulphoaluminate cement-based grouting material for a large domestic water-sealed underground oil tank with pressurized cyclic grouting, a laboratory grouting simulation is conducted. It is found that the properties of the sulphoaluminate cement-based grouting material are quite different under different pressure cycles, the hydration exothermic peak time gets shorter with an increase of circulation time, the compressive strength decreases with an increase of circulation time, and the longer the circulation time the more obvious the de-crease of compressive strength. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

虚拟船舶中压电站系统设计

虚拟船舶中压电站系统以实际船舶的中压电站为原型。系统利用组态软件PIMS作为开发平台,通过数据库构建、人机交互界面设计及程序脚本的编写,实现虚拟船舶中压电站系统的各项操作功能。本系统是一个开放的系统,功能可以拓展。系统可以网络发布,在学员培训方面具有良好的应用前景。     

静态爆破法在深圳地铁施工中的应用

静态爆破是近年来发展起来的一种新型爆破施工技术,它可在无震动、无飞石,无噪音、无污染的条件下破碎或切割岩石或混凝土构筑物。深圳地铁2号线东延线土建工程安托山站—侨香站区间矿山法施工竖井系选用此工法在2 500 mm×3 000 mm雨水箱涵附近成功地进行了中、微风化花岗岩开挖施工,确保了雨水箱涵的安全性。     

水平旋喷桩施工工艺在深圳地铁施工中的应用

在深圳地铁安托山站—侨香站区间矿山法隧道超前支护施工中,由于采用了水平旋喷桩施工工艺,成功地解决了安-侨区间暗挖隧道在饱和粉细砂层及砾砂层中近距离穿越大断面雨水箱涵及φ500 mm次高压燃气管线的难题,节约了施工成本,充分显示了水平旋喷桩施工工艺在富水砂层浅埋暗挖隧道开挖预支护工程应用上的经济优势。文章论述了水平旋喷桩的工艺机理、适应性、优缺点以及在该工程中的应用效果。     

Analyzing urban bus service reliability at the stop, route, and network levels

Improving the reliability of bus service has the potential to increase the attractiveness of public transit to current and prospective riders. An understanding of service reliability is necessary to develop strategies that help transit agencies provide better services. However, few studies have been conducted analyzing bus reliability in the metropolis of China. This paper presents an in-depth analysis of service reliability based on bus operational characteristics in Beijing. Three performance parameters, punctuality index based on routes (PIR), deviation index based on stops (DIS), and evenness index based on stops (EIS), are proposed for the evaluation of bus service reliability. Reliability involves routes, stops, punctuality, deviation, and evenness. The relationship among the three parameters is discussed using a numerical example. Subsequently, through a sampling survey of bus lines in Beijing, service reliability at the stop, route, and network levels are estimated. The effects of route length, headway, the distance from the stop to the origin terminal, and the use of exclusive bus lanes are also analyzed. The results indicate low service reliability for buses in Beijing and a high correlation between service reliability and route length, headway, distance from the stop to the origin terminal, and the provision of exclusive bus lanes.