A robust non-Hertzian contact method for wheel–rail normal contact analysis

A modified Kik–Piotrowski (MKP) model is proposed in this paper for an accurate and robust calculation of wheel–rail normal contact problem. The presented method is able to consider the relationship between the elastic deformation of a line and the normal pressure distribution within the contact patch. A novel shape correction method is put forward to correctly describe the elastic deformation of the contact patch. Taking the results estimated by Kalker’s variational method and Kik–Piotrowski method as references, the proposed method is validated by three contact cases, including the assumed standardised non-Hertzian contact and the two-point contact, as well as the contact behaviours based on three actual wheel–rail profiles. The simulation results indicate that, compared with Kik–Piotrowski method, the proposed MKP method achieves better agreement with Kalker’s variational method. Moreover, the MKP method can avoid the abrupt change of wheel–rail normal force due to the sudden transfer of the contact point, which contributes to a better computational stability.     

Numerical Analysis of the Mixture Formation in a Two-Stroke Wall-Guided LPG DI Engine for Extended-Range Electric Vehicle

The use of automotive LPG characteristics which are easy to evaporate vaporization and carry. The paper presents a design of extended-range electric vehicle for wall-guided two stroke LPG engine with direct injection combustion system. Based on the modified vehicle LPG spray model, a database describing the characteristics of vehicle LPG fuel was built and imported into the CFD software. And the accuracy of the model is verified by the Schlieren experimental results. The concentration and velocity field of the mixture in the cylinder under different load conditions are numerically analyzed. The analyzed result indicated that the start injection time θ = 60°–70°CA BTDC under part load condition, the plug electrode near the gathering of a richer mixture is easy to be fired at spark ignition time, the obvious formation of mixture in cylinder is formed and the overall air-fuel ratio is above 40: 1. The start-transition working condition and large load conditions in the piston moves upward before closing the exhaust port to start injection LPG. The optimized LPG injection start time θ ensures that the fresh gas is locked in the cylinder when the exhaust port is closed (63°CA ABDC). In the ignition time of the spark plug, an ideal homogeneous mixture in the cylinder is realized.     

用于车身制造质量控制的白车身测点布置及优化

在对检测点进行分类定义后阐述了车身设计阶段各类测点的布置原则，在此基础上提出了面向制造偏差诊断的测点布置位置优化方法。     

车辆主动悬架系统的LMS自适应控制

选择LMS自适应滤波算法，通过调整自适应滤波器的权系数使二次性能指标达最小，根据单个样本方差的负梯度来调节权系数；得到控制输出。针对简化的车辆模型，将空钩控制、广义自适应控制与LMS自适应控制相对比。仿真计算表明，主动悬架系统LMS自适应控制策略不仅计算简单，而且理论上在主动悬架系统中的应用是切实可行的，性能明显优于其它对比控制方法。     

沥青路面就地热回收微波技术的探讨

介绍了沥青路面现场加热回收的几种方式．并进行一定的探讨与比较，特别是对微波技术的应用进行了分析。     

系杆拱桥无支架施工探讨

本文结合上海市青浦区蒸浦大桥施工实践 ,简要介绍了钢筋混凝土系杆拱桥无支架施工的工艺。     

部分剪力连接钢-混凝土组合梁附加变形计算

本文在滑移应变微分方程的基础上 ,建立部分剪力连接钢 -混凝土简支组合梁由滑移引起的附加变形方程及组合梁变形计算的一般公式 ,得到了部分剪力连接简支组合梁的附加变形和变形与剪力连接程度系数之间的关系与规律 ,公式简单实用     

如何作好建设工程竣工结算审核工作

工程竣工结算系指施工企业按照合同规定的内容全部完成所承包的工程,经验收质量合格,并符合合同要求之后,向发包单位进行的最终工程款结算.     

AQP4在COPD支气管黏膜的表达及其与患者肺功能、气道黏膜炎症的相关性

目的通过免疫组化法检测支气管黏膜中水通道蛋白-4(aquaporin-4,AQP4)的表达,观察正常组和慢性阻塞性肺疾病(chronic obstructive pulmonary disease,COPD)组支气管黏膜中AQP4表达与气道黏膜炎症及肺功能的关系,明确AQP4在COPD发生、发展中的作用,为COPD的防治开辟新途径。方法选择正常人和COPD患者各30例,测试肺功能,并行支气管镜检查,取得支气管黏膜标本,用免疫组化法检测AQP4表达,HE染色观察支气管黏膜炎症细胞浸润程度。结果COPD组较对照组AQP4表达减弱有极显著差异(P<0.001)。AQP4表达和FEV1/FVC、FEV1/pred%呈正相关(P<0.001),与支气管黏膜炎症严重程度呈负相关(P<0.001)。结论COPD患者AQP4表达减少可能是其肺功能下降及气道炎症加重的原因之一。临床上可以通过改善AQP4治疗COPD。     

苏通大桥混凝土桥梁防水层系统设计及施工技术研究

对苏通大桥桥面防水层的设计,粘结材料的室内试验,试验段方案比选和现场试验进行介绍,最终确定防水体系和施工工艺．并取得了较好的效果。