Finite element modeling of suction anchors under combined loading

Suction anchors are subjected to inclined, quasi-horizontal or quasi-vertical loadings. The type of the structure and depth of water govern the inclination of the load. Under this load condition, suction anchor experiences a combination of horizontal and vertical translations, and rotation. Therefore the soil's reaction to this load condition can be idealized as horizontal and vertical loadings, together with a moment. The magnitude and combination of the reactions depend on the load inclination, soil property and the point at which the load is applied. The behavior of the suction anchor subjected to the combined V–H-M loading is elaborated in this paper. This is to observe the effects of soil properties on the failure mechanism and ultimate capacity of the foundation. This was achieved by applying the pure horizontal and vertical displacements, and rotation and their combinations to the foundation, on V–H, V-M and H-M spaces and the yield-locus created for each space. The general purpose finite element program DIANA was used for this study. Non-linear analysis was conducted using a simplified elastic-perfectly-plastic model with Von-Mises yield criterion for saturated and consolidated clay.     

Incorporating Driver Behaviors in Network Design Problems: Challenges and Opportunities

The goal of a network design problem (NDP) is to make optimal decisions to achieve a certain objective such as minimizing total travel time or maximizing tolls collected in the network. A critical component to NDP is how travelers make their route choices. Researchers in transportation have adopted human decision theories to describe more accurate route choice behaviors. In this paper, we review the NDP with various route choice models: the random utility model (RUM), random regret-minimization (RRM) model, bounded rationality (BR), cumulative prospect theory (CPT), the fuzzy logic model (FLM) and dynamic learning models. Moreover, we identify challenges in applying behavioral route choice models to NDP and opportunities for future research.     

Non‐compatible chemicals as cargoes in industry,on road,rail, and water

Toronto is to have an urban transit system with a passenger carrying capacity which fills the gap between the capacity of the subway and the capacity of the car and bus. Correspondingly, in the words of the Premier of Ontario, the system will “make possible an attractive alternative to high‐rise, high‐density living and urban sprawl. . . .” Furthermore, the new system is sufficiently economical to provide “. . . an encouragement to growth in appropriate areas, rather than merely responding to growth as it occurs . . .”

The decision to have such a system is the culmination of some years of major transportation activities in the Province, which included the Metropolitan Toronto and Region Transportation Study (MTARTS) of 1962. This study pursued both urban expressways and public transport solutions to the movement of people in Metropolitan Toronto.

The urban expressways programmes ran into difficulties, on environmental terms, when strong opposition from community groups was met on proposed routes. A climax came when the Ontario Government halted the construction of the controversial Spadina expressway in June 1971. However, the programmes of public transport solutions met with great success. The Toronto subway and its extensions, together with the change in land values along the route, has become a classic success story. So, too, has the introduction of the GO Train Service (Government of Ontario train service). This pioneered a combination of commuter rail service and integrated feeder buses and today replaces some 14,000 cars each day along the lakeshore highways.

The success of the subway and the GO train coupled with the difficulties experienced by the urban expressways programme, gave rise to the realisation that a better city through public transport rather than the car, was practicable. However, subways were too expensive and they needed a large patronage in a narrow corridor. Accordingly, an intermediate capacity transit system was sought.

The paper describes the programme of activities involved in the choice of the system and describes the technical specification which the system will enjoy. In particular, the demonstration installation which is to be set‐up in Toronto is described in detail, together with the plans to instal some 56 miles over five routes in Metropolitan Toronto.     

The problems of hydrocarbon extraction

The problems associated with hydrocarbon extraction in the EEZ are discussed under the headings of resources and environment, technology and the industrial structure, government management, decision-making, and policy formulation. Policy areas identified include boundary delimitation relative to resources, environment and technology, co-ordination and decision-making machinery, relationships with UK and EEC energy policies, and regional planning of the sea and coastal areas used by the off-shore industry.     

In-use measurement of the activity, fuel use, and emissions of eight cement mixer trucks operated on each of petroleum diesel and soy-based B20 biodiesel

In-use micro-scale fuel use and emission rates were measured for eight cement mixer trucks using a portable emission measurement system. Each vehicle was tested on petroleum diesel and B20 biodiesel. Average fuel use and emission rates increase monotonically versus engine manifold absolute pressure. A typical duty cycle includes loading at a cement plant, transit while loaded from the cement plant to work site, creeping in a queue of vehicles at the worksite, unloading, and transit without load from the site to the plant. For B20 versus petroleum diesel, there is no significant change in the rate of fuel use, CO₂ emissions, and NO emissions, and significant decreases in emissions for CO, hydrocarbons, and particulate matter. For loaded versus unloaded onroad travel, fuel use and CO₂ emissions rates are approximately 60% higher and the rates for other pollutants are approximately 30–50% higher. A substantial portion of cycle emissions occurred at the work site. Inter-vehicle and intra-cycle variability are also quantified using the micro-scale methodology.     

FLIRT--创新的区间运输轻型快速动车组

为适应区间铁路客运的需要,瑞士Stadler铁路成套设备公司开发了创新的轻型快速区间运输动车组FLIRT(Flinker Leichter Innovativer Regional Triebzug).该动车组以用于贯穿瑞士南北铁路连接线的瑞士中部州府而闻名.该城市必须重新评价其近郊铁路客运的设计,寻求远期的解决办法.就今天公交运输的财政形势来说,必须寻求一种费用最佳的解决办法.为此放弃了广泛新建铁路基础设施的办法,而主要是充分利用现有基础设施.对此决定将FLIRT动车组用于客、货运繁忙的南北铁路连接线.文章介绍该城市铁路动车组的设计.     

Exact and simplified estimations for elastic buckling pressures of structural pipe-in-pipe cross sections under external hydrostatic pressure

Structural pipe-in-pipe cross sections have significant potential for application in offshore oil and gas production systems because they combine thermal insulation performance with structural strength and self weight in an integrated way. Such cross sections comprise inner and outer thin-walled pipes with the annulus between them fully filled by a selectable filler material to impart an appropriate combination of properties. Structural pipe-in-pipe cross sections can exhibit several different collapse mechanisms, and the basis of the preferential occurrence of one over the others is of interest. This article presents an exact analysis for predicting the elastic buckling behaviours of a structural pipe-in-pipe cross section when subjected to external hydrostatic pressure. Simplified approximations are also investigated for elastic buckling pressure and mode when the outer pipe and its contact with the filler material is considered as a pipe on an elastic foundation. Results are presented to show the variation of elastic buckling pressure with the relative elastic modulus of the filler and pipe materials, the filler thickness, and the thicknesses of the inner and outer pipes. Case studies based on realistic application scenarios are used to show that the simplified approximations are sufficiently accurate for practical structural design purposes.     

Special issue: Importance of public transport

The transport demand in most major cities around the world can only be met with a high‐quality public transport system. The requirements on bus, rail, underground and tram systems are manifold with reliability and efficiency as the key factors. The service operating hours and the size of the network are often extended in order to serve the needs better. Further, most metropolitan areas are trying to provide more incentives for citizens to leave the car at home and use the local transit systems instead. The reasons are well known. Not only does a public transport system only make economical sense if it is well used, but most urban areas with a high car‐dependency face at least three major problems; safety, congestion, and pollution (noise and air pollution, land separation, etc.). It is generally recognised that to decrease car usage and to increase public transport usage a stick & carrot approach is needed. The London congestion‐charging scheme is an example since all revenues collected by the scheme are put into the improvement of bus and underground services.     

Validation of a schedule‐based capacity restraint transit assignment model for a large‐scale network

This paper describes the application of a capacity restraint trip assignment algorithm to a real, large‐scale transit network and the validation of the results. Unlike the conventional frequency‐based approach, the network formulation of the proposed model is dynamic and schedule‐based. Transit vehicles are assumed to operate to a set of pre‐determined schedules. Passengers are assumed to select paths based on a generalized cost function including in‐vehicle and out‐of‐vehicle time and line change penalty. The time‐varying passenger demand is loaded onto the network by a time increment simulation method, which ensures that the capacity restraint of each vehicle during passenger boarding is strictly observed. The optimal‐path and path‐loading algorithms are applied iteratively by the method of successive averages until the network converges to the predictive dynamic user equilibrium. The Hong Kong Mass Transit Railway network is used to validate the model results. The potential applications of the model are also discussed.