Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

Experimental Investigation of TARMAX Model for Modeling of Hydrodynamic Forces on Cylinder-like Structures

A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous (ARMAX) input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this paper, the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input a...     

A frequency-based maritime container assignment model

This paper transfers the classic frequency-based transit assignment method of Spiess and Florian to containers demonstrating its promise as the basis for a global maritime container assignment model. In this model, containers are carried by shipping lines operating strings (or port rotations) with given service frequencies. An origin–destination matrix of full containers is assigned to these strings to minimize sailing time plus container dwell time at the origin port and any intermediate transhipment ports. This necessitated two significant model extensions. The first involves the repositioning of empty containers so that a net outflow of full containers from any port is balanced by a net inflow of empty containers, and vice versa. As with full containers, empty containers are repositioned to minimize the sum of sailing and dwell time, with a facility to discount the dwell time of empty containers in recognition of the absence of inventory. The second involves the inclusion of an upper limit to the maximum number of container moves per unit time at any port. The dual variable for this constraint provides a shadow price, or surcharge, for loading or unloading a container at a congested port. Insight into the interpretation of the dual variables is given by proposition and proof. Model behaviour is illustrated by a simple numerical example. The paper concludes by considering the next steps toward realising a container assignment model that can, amongst other things, support the assessment of supply chain vulnerability to maritime disruptions.     

A single-period analysis of a two-echelon inventory system with dependent supply uncertainty

Disruptions and random supplies have been important sources of uncertainty that should be considered in the design and control of supply chains. There have been many real world examples in which a single catastrophic event has simultaneously degraded the capabilities of several suppliers leading to considerable erosion of profits and goodwill for a company. However, the literature on analytical models that account for the dependence nature of disruptions and its impact on supply chain performance is sparse.In this paper, we consider an m-manufacturer, 1-retailer, newsvendor inventory system with stochastically dependent manufacturing capacities, caused by random disruptions that may simultaneously inflict damages to the capacities of the manufacturers. We develop the structural/analytical properties of key performance measures and optimal inventory policies for the multi-source and assembly inventory systems. We show that stochastic dependence in disruptions can have opposite effects on system performance in the multi-source and assembly systems. While risk diversification is preferred in the multi-source system, risk concentration is preferred in the assembly system. Our results also suggest that, if the retailer ignores the effect of dependent disruptions, then in the multi-source structure, it would underestimate the cost, overestimate the fill rate, and order more units than the optimum; however, in the assembly structure, the opposite would happen. We perform a comprehensive numerical study to validate our analytical results and generate useful managerial and operational insights for effective risk management of supply chains in the presence of dependent supply uncertainty.     

A generic class of first order node models for dynamic macroscopic simulation of traffic flows

Node models for macroscopic simulation have attracted relatively little attention in the literature. Nevertheless, in dynamic network loading (DNL) models for congested road networks, node models are as important as the extensively studied link models. This paper provides an overview of macroscopic node models found in the literature, explaining both their contributions and shortcomings. A formulation defining a generic class of first order macroscopic node models is presented, satisfying a list of requirements necessary to produce node models with realistic, consistent results. Defining a specific node model instance of this class requires the specification of a supply constraint interaction rule and (optionally) node supply constraints. Following this theoretical discussion, specific macroscopic node model instances for unsignalized and signalized intersections are proposed. These models apply an oriented capacity proportional distribution of the available supply over the incoming links of a node. A computationally efficient algorithm to solve the node models exactly is included.     

Frequency-based transit assignment considering seat capacities

This paper proposes a frequency-based assignment model that considers travellers probability of finding a seat in their perception of route cost and hence also their route choice. The model introduces a “fail-to-sit” probability at boarding points with travel costs based on the likelihood of travelling seated or standing. Priority rules are considered; in particular it is assumed that standing on-board passengers will occupy any available seats of alighting passengers before newly boarding passengers can fill any remaining seats. At the boarding point passengers are assumed to mingle, meaning that FIFO is not observed, as is the case for many crowded bus and metro stops, particularly in European countries. The route choice considers the common lines problem and an user equilibrium solution is sought through a Markov type network loading process and the method of successive averages. The model is first illustrated with a small example network before being applied to the inner zone of London’s underground network. The effect of different values passengers might attach to finding a seat are illustrated. Applications of the model for transit planning as well as for information provision at the journey planner stage are discussed.     

Assessing the cost of transfer inconvenience in public transport systems: A case study of the London Underground

Few studies have adequately assessed the cost of transfers² in public transport systems, or provided useful guidance on transfer improvements, such as where to invest (which facility), how to invest (which aspect), and how much to invest (quantitative justification of the investment). This paper proposes a new method based on path choice,³ taking into account both the operator’s service supply and the customers’ subjective perceptions to assess transfer cost and to identify ways to reduce it. This method evaluates different transfer components (e.g., transfer walking, waiting, and penalty) with distinct policy solutions and differentiates between transfer stations and movements.The method is applied to one of the largest and most complex public transport systems in the world, the London Underground (LUL), with a focus on 17 major transfer stations and 303 transfer movements. This study confirms that transfers pose a significant cost to LUL, and that cost is distributed unevenly across stations and across platforms at a station. Transfer stations are perceived very differently by passengers in terms of their overall cost and composition. The case study suggests that a better understanding of transfer behavior and improvements to the transfer experience could significantly benefit public transport systems.     

炎热天气对钢渣混凝土抗压强度的影响

将普通混凝土和钢渣质量分数为10％、30％和50％的混凝土试件分别放入40℃、50℃和60℃的热水中,测试了不同龄期试件的抗压强度和超声波脉冲速度,分析了炎热天气对钢渣混凝土抗压强度的影响.分析结果表明:在测试龄期内,各混凝土试件的抗压强度并不随着炎热天气的影响而发生削减;钢渣混凝土试件在第90 d达到最高抗压强度61...     

基于纸纤维改性的隧道工程透水砂浆性能研究北大核心CSCD

为提出一种适用于隧道初期支护基面找平并且具有一定透水性能的砂浆,将纸纤维加入砂浆试块中对其性能进行改性。通过分析纸纤维的降解原理,并将不同掺量的纸纤维加入砂浆试块中,对其体积密度、吸水率、抗压强度等基本性能指标及微观结构进行测试和分析。由试验结果可知:在碱性环境中,纸纤维具有可降解的性能特点;纸纤维可以使普通砂浆试块的吸水率提升2~3倍,同时也会造成砂浆试块的体积密度和抗压强度降低;对砂浆试块吸水率和抗压强度进行线性拟合后发现其吸水率和抗压强度呈现负相关关系。研究结果表明,通过纸纤维对砂浆进行透水性能的提升是可行的,但是纸纤维掺量对砂浆其他性能的影响还有待进一步研究。