Strong bottom–up effects on phytoplankton community caused by a rainfall during spring and summer in Sagami Bay,Japan

To assess the consequences of bottom-up effects on phytoplankton community composition during the rainy season, phytoplankton levels and environmental factors were monitored daily from 12 April to 22 July 2003 in Sagami Bay, Japan. The relevant environmental factors were analyzed using cross-correlation analyses. Based on time-series analysis, low surface salinity conditions lasting 0 or 2 days after heavy rainfalls resulted in significant nutrient loading, such as dissolved inorganic nitrogen (DIN), into the coastal area. Also, Chlorophyll-a (Chl-a) concentration frequently increased 2 and 6 days after rainfall. Based on the high total Chl-a concentration, the time was divided into three periods, from 1 to 11 May (Period A), 26 May to 9 June (Period B) and 30 June to 22 July (Period C). The phytoplankton assemblages during Period A were dominated by two dinoflagellates, Ceratium furca and Ceratium fusus. Prior to these species blooming, the heterotrophic dinoflagellate Noctiluca scintillans was dominant. During Period B, the phytoplankton communities were dominated primarily by the diatoms Rhizosolenia delicatula, Hemiaulus sinensis and Navicula spp. Finally, Cerataulina dentata, Rhizosolenia spp., Lauderia borealis and Neodelphineis pelagica were dominant during Period C. After increases in phytoplankton abundance, available nitrogen (N) and phosphorous (P) were consumed and exhausted, which were considered a potential cause of the shift in the dominant organisms from large diatoms to pico- and nano-plankton in the low Chl-a environment. In particular, silicate (Si) was not a major limiting factor for phytoplankton production, since the Si:DIN and Si:P ratios clearly demonstrated that there were no any potential stoichiometric Si limitations, and almost all silicate concentrations were > 2.0 µM during this study. Our results reveal that nutrient sources supplied by river discharge are a main cue for strong bottom–up effects on algal bloom succession during the early summer season in Sagami Bay.     

浅谈青岛港集装箱码头轮胎吊自动纠偏技术

为了提高效益,确保安全,青岛港集装箱码头进行了轮胎吊大车行走纠偏技术攻关,对几种自动纠偏方式进行了分析比较,选择超声波技术作为最佳方案。具体介绍了超声波技术方案的实施步骤及出现的几种工况,该方案取得了良好的效果。     

地铁交通诱发邻近建筑物振动的实测与分析

根据现场实测数据,对某地铁2号线沿线典型区段地铁引起的临近建筑物振动实况和振动特性及其传播规律等进行了分析研究。结果表明:地铁诱发的沿线建筑物的振动以竖向为主,且楼层竖向振动基本表现为整体振动;在框架结构中,振动信号主要是沿柱子向上部楼层传播;楼层振动主要表现为低频的楼板振动,楼层间信号的放大主要集中在20 Hz以下的低频信号。此外,本文还给出建筑物振动实测资料的评价分析,为评估地铁运营诱发的环境振动与城市规划设计提供参考。     

永字八法

永字八法是以"永"字的八笔(点、横、竖、钩、捺、仰横、长撇、短撇)为例,阐述毛笔正楷点画用笔的一种方法.     

高效燃烧汽油机技术特点分析与研究

参照近代内燃机技术手段可知,采用阿特金森循环等传统降油耗技术手段往往伴随着发动机动力性能的妥协,因此寻找一种兼顾动力性与经济性的提升热效技术手段变得迫在眉睫。阐述了马自达SKYACTIV-X、现代起亚Smartstream 1.5 L Turbo GDI等高热效汽油机技术路线的原理、结构形式、技术特点,为日后研发工作指明了方向。     

商用车试制PT至SOP快速验证方法研究

目前商用车的开发主要分为骡子车试制、工程试制和试生产几个阶段,与乘用车不同,商用车存在车型配置繁多,而且不同的配置之间可能会对整车在底盘的布置产生影响,进而影响整车在量产线的通过性,因此有必要在PT(工程试制)和SOP(试生产)阶段间加一个验证阶段,文章首先介绍了PT转SOP试制线的布局及工艺编排,然后对PT转SOP快速试制验证流程进行了介绍,最后对PT转SOP量产通过性的判断指标进行了说明,对PT车型如何更好的过渡到量产,减少量产线的停线及线下返工具有一定的参考意义。     

城市公路施工现场物资管理

为了加强施工企业市场竞争力,在施工中,对现场物资进行科学管理,对施工成本严格控制,是企业生产经营非常必要的手段之一,介绍了施工中做好现场物资管理的方法和建议.     

格雷母线在推车机、拨车机位置检测中的应用

秦皇岛港煤二期翻车机电气控制系统采用Quantum系列PLC以及ABB公司的DCS500直流传动系统,位置检测采用了先进的AS-i"现场总线控制"方式.     

RBF神经网络在传感器故障诊断中的应用研究

提出一种基于RBF神经网络的传感器在线故障诊断方法,用某气囊隔振系统隔振装置中大量的传感器数据进行了仿真实验,验证了方法的可行性.通过对每个传感器建立单独的神经网络预测模型,实现多传感器的故障诊断.     

SEW行走三位一体减速机输出轴油封改造

分析了门座式起重机行走机所采用的SEW减速箱漏油现象，介绍了技术改造的方案，取得了较好的效果。