某公路四跨45m双曲拱桥病害分析及加固

钢筋混凝土双曲拱桥在上世纪70年代应用比较广泛,其中绝大部分在现代公路交通运输中仍发挥着巨大的作用。但由于设计标准较低,再加上多年超载运营,桥梁病害严重,承载能力降低,对行车安全构成了严重的威胁。该文系统地总结了既有钢筋混凝土双曲拱桥的病害,并指出了病害产生的原因,根据双曲拱桥的结构特点和病害特征,研究了双曲拱桥的维修加固措施,并以一座实际桥梁为工程背景,将维修加固措施应用到实际当中。通过加固前后桥梁抗力的对比可知,该文所提出的维修加固措施对双曲拱桥是非常有效的。     

Analytical study to estimate the performance of the Power Shift Drive (PSD) Axle for a forklift

In this study, a new concept for a power delivery system is developed. Power Shift Drive (PSD) Axle vehicle modeling and dynamic movement analysis are performed via simulation. The dynamic vehicle model is constructed from data obtained from the derived equation, considering the specific characteristics of each part. The model is composed of a torque converter, a gear box, a differential, hub reduction and an engine, which is the power source of the 1st forward and reverse PSD-Axle. By unifying the mathematical equations for each component, a mathematical model of the 1st forward gear is derived. The system dynamic model is created using MATLAB/Simulink based on the mathematical model. Simulation is carried out using Simulink to estimate the dynamic behavior of the PSD-Axle. In addition, the dynamo test result is used to verify the model. Finally, a successful model is created. This study will be used to establish the basic conceptual design for the PSD-Axle multi-gear system.     

Emissions simulation in a 7000 kg-grade diesel hybrid electric vehicle

Hybrids combine a combustion engine with an electric motor and battery. The two technologies can be combined to reduce fuel consumption and exhaust emissions. This paper presents the concept of hybrid electric vehicles (HEVs) applied to truck or van vehicles with diesel engines. The simulation results from the advanced vehicle simulator (ADVISOR) demonstrate that the required power may be properly shared between the internal combustion engine and electric motor. The simulation can also be used to prove that the technique is useful for improvements in driving performance; additionally, the technique is suitable for hybrid electric vehicles, allowing for good fuel economy and low emissions performance.     

中重型商用车发动机进排气系统的测试与匹配性研究

利用计算机作为通信和指令控制的上位机,组建了一套进排气系统多点压力、温度的自动采集和记录测试系统。使用该测试系统,对不同类型的发动机进排气组件进行了匹配性研究,经过系统的压力、温度对比试验,针对具体一款发动机找到最佳的进排气组件,有效地改善了发动机的经济性、动力性和排放性能。同时该测试方法作为一种技术手段为发动机匹配性的设计与优化提供了客观、量化的试验数据。     

基于EIGRP协议的动态路径诱导系统

基于网络中数据传输协议的思想,以成熟的网络技术为依托,提出基于EIGRP路由协议的动态路径诱导系统,构造了一个简单的系统结构框架.此系统具有网络收敛快、可靠性强、系统成本低、灵活性好等优点.     

HVAC风道空气泄漏检测方法研究

介绍了一种用于自动控制检测采暖通风与空调(HVAC)总成及风门的空气泄漏量的检测方法.在HVAC接口的上游建立一个稳压室,利用自动检测与控制方法使稳压室的空气压力稳定在一定范围内,通过稳压室上游接口处的流量传感器来检测HVAC的空气泄漏情况.与传统检测技术相比,该检测方法具有灵敏度高、压力控制准确、自动化程度高、使用方便等特性.     

固化剂硬化二灰土研究

针对二灰土存在早期强度低、水稳定性差等路用性能缺陷,通过室内试验研究固化剂硬化二灰土,结果表明：普通二灰土加入适量的固化剂,可显著改善二灰土早期强度低、水稳定性差的缺陷：同时使抗冻性、劈裂强度、抗压回弹模量都得到了一定程度的提高。     

重型自卸汽车车架设计与改进

概述了重型自卸汽车车架设计的主要内容,对车架纵梁截面的形式及其加强梁的布置、横梁的设计与布置、横梁与纵梁的固定等进行了论述和设计,并对两种不同的车架方案进行了有限元对比计算分析.     

Walsh threshold matched-filtering based anti-collision for surface acoustic wave tags

Surface acoustic wave (SAW) tags are truly passive devices and do not contain any intelligence, so the question of multiple read in the reading range comes up. The paper suggests a Walsh matched-filtering method in Walsh field to distinguish the collision tags with a threshold. In advance, the code states with special sequency are selected from large possible states and the sequency variables of these tags are saved in a database. When a few tags are read simultaneously in read range, the received signal is filtered by the known sequency of single tag in database, and then these tags can be distinguished by the filtered result. Proper threshold selection improves operation speed. Experiment proves that this method is useful and reliable.