Numerical analysis and experimental study on the performance optimization of cold storage heat exchanger integrated with evaporator

The ISG (Idle Stop and Go) systems are commonly used in modern automobiles because they are economical and environmental friendly technology. However, when a vehicle stops, the air-conditioning system stops, resulting in thermal discomfort to passengers in the cabin. This paper examines a cold storage heat-exchanger (CSH) integrated with an evaporator. The position of the cold storage parts inside a heat exchanger was analyzed through numerical simulations using FLUENT to create an adequate design for a CSH. The CSH performance was then examined with various airflow volumes and optimized experimentally in terms of the refrigerant flow circuit and fin density in the heat exchanger. Next, an experiment on the coldness release performance of the CSH was conducted in the air-conditioning system. The cold storage system with optimized CSH experiment resulted in lower air discharge temperatures (3.5 °C ~ 4.9 °C) than current air-conditioning systems, and delayed the warm-up by approximately 155 seconds to reach 18 °C temperature of air discharge. For this study, the CSH is an effective solution for the ISG-applied vehicles with less investment by transforming current air-conditioners’ structures more effectively.     

Acoustical Characteristics of the Air Filter in the Engine Intake Air Cleaner

Linear acoustic theory is used for estimating the acoustical performance of the air cleaner box composed of the porous filter and encasing box in the engine intake system. The pleated filter structure is modeled as coupled multiple ducts having permeable micro-perforated walls and rectangular section, in which each duct area is assumed being homogeneous or inhomogeneous. Mathematical models describe the sound propagation within the narrow duct considering the visco-thermal effect at the filter pleats. For the validation, transmission loss (TL) is measured, and a change in TL spectrum is clearly observed by including the filter into the box. It is shown that the predicted TL counting the effect of visco-thermal loss agrees reasonably well with the experimental results. Noticeable effects of the filter on the TL are observed as highly smoothing effect at high frequencies and enhancing the TL magnitudes at troughs and lobes at low frequencies. Comparing homogeneous and inhomogeneous channel modelings, the latter is superior in precisely predicting the trough frequencies of TL curve, but the former is a bit better in predicting its magnitude. Parametric study on material and shape factors reveals that the number of pleats, length of the pleated filter, and distance between neighboring pleats are the key factors in determining the TL. It is concluded that an air filter element that has small number of long pleats with high flow resistance would bear the best acoustical performance among all designs.     

Effect of freeboard and metacentric height on capsizing probability of purse seiners in irregular beam seas

The probability of capsize of purse seiners in irregular beam seas and the effect of freeboard height and metacentric height on trapped water on the deck was investigated. The aim was to quantify a safety level that can be achieved by direct stability assessment for this type of fishing vessel. The amount of trapped water on deck was numerically estimated using a hydraulic flow assumption. The long-term capsizing probabilities were estimated using a piecewise linear approach together with wave statistics from major Japanese fishing areas. The estimated safety level of capsizing probability was compared with that obtained by the IMO weather criterion and by the water-on-deck criterion of the IMO Torremolinos Convention. Numerical results for four typical Japanese purse seiners indicated that the effect of freeboard, on the amount of trapped water on deck, is more important than that of the metacentric height. Besides the metacentric height and the freeboard, it was shown that the danger of capsizing is a function of the rise of floor. The safety level obtained by the capsizing probability approach is generally higher than that based on the IMO weather criterion. However, the water-on-deck criterion provides a higher safety level than the capsizing probability approach for ships with a low rise of floor.     

Fatigue crack growth rates of rotor steel at elevated temperatures

Low fatigue samples were obtained from the outer edges of rotor steel （30CrlMolV） which had operated under different temperatures conditions. Based on this data, the effects of temperature on fatigue crack growth rates were investigated. This paper presents a derivation of the superposition expression of two natural logarithms governing crack growth rates and also discusses the relationship between a material’s constants and temperature. These results can provide experimental and theoretical references for fatigue life design of rotor steel in steam turbines.     

Experimental and numerical investigations of the flow around an oar blade

This article aims at verifying the capabilities of a Reynolds-Averaged Navier-Stokes Equations (RANSE) solver (ISIS-CFD, developed at the Fluid Mechanics Laboratory of Ecole Centrale de Nantes [LMF]) to accurately compute the flow around an oar blade and to deduce the forces on it and other quantities such as efficiency. This solver is structurally capable of computing the flow around any blade shape for any movement in six degrees of freedom, both when the blade pierces the free surface of the water and when it does not. To attempt a first validation, a computation was performed for a simplified case chosen among those for which experimental results are available at LMF. If results prove satisfactory for a simplified blade shape and for a movement that respects the main characteristics of blade kinematics, then the solver could be used for real oars and more realistic kinematics. First, the experimental setup is considered, and the objectives, methodologies, and procedures are elucidated. The choice of the test case for numerical validation is explained, i.e., a plane rectangular blade with a constant immersion and a specified movement deduced from analogy with tests on propellers. Next, the numerical framework is presented and the Navier-Stokes solver and methods for handling multifluid flows and moving bodies are described. Lastly, numerical results are compared with experimental data, highlighting an encouraging agreement and proving the relevance and the complementarity of both approaches.     

Dynamic stability in following seas: predictive and experimental approaches

This article presents work based on the development of a performance-based stability assessment method. It describes a numerical method used to determine the survival limit for a dynamic intact stability assessment procedure. The numerical method utilises a time-domain vessel motion program to assess the limit for a range of vertical centres of gravity (KG). The appropriateness of the numerical predictions was examined through comparison with model experiment results. Free-running model tests were conducted in regular following waves at discrete KGs. A comparison between the survival limits determined through the numerical and experimental methods is presented. The current International Maritime Organisation (IMO) stability criteria are also evaluated against the numerical and experimental dynamic performance-based stability assessment methods.     

Critical success conditions of collaborative methods: a comparative evaluation of transport planning projects

This paper explores critical success conditions of collaborative planning projects in the area of urban transport, evaluating the impact of new collaborative methods, instruments and processes on project performance. Hypothesis building is based on a comparative, empirical research design, rather than on deductive theory construction. Potential critical success conditions are derived from literature. Based on five urban transport planning projects in Gothenburg (Sweden), London (United Kingdom), Milwaukee (United States), Tokyo (Japan) and Mexico City (Mexico), a rough set analysis of the five cases reveals validated success conditions, which can be used for formulating hypotheses for further research or for policy and process improvement. The results suggest that a dedicated management of the multi-actor network, a high diversity of actors, as well as an extensive use of knowledge integration methods in combination with a high network density are critical success conditions of these planning processes. Surprisingly, the extensive use of unilateral methods also showed to be an important success condition. The traditional role of the planner will have to be complemented with the expertise of network and methodology management. The authors conclude that rough set analysis can be a valuable addition to narrative, single-case analysis of collaborative urban transport planning processes.     

Incorporated probability that a fleet meets a given permissible value for the hull girder section modulus loss

The paper presents a study on the incorporated probability that a tanker fleet meets a given permissible value of hull girder strength loss. The analysis was based on a database of hull girder section modulus (HGSM) for as-gauged girth belts of tankers. It was found that its mean value is below 5% over the entire life span of the analyzed tanker fleet. The Weibull probabilistic distribution was found to best represent the time-varying HGSM loss. A method was developed for calculating the incorporated safety of a fleet. As an example, the IMO requirement for a maximum HGSM reduction of 10% relative to its required value was analyzed, accounting for time-variant HGSM loss and including a probabilistic model for coating longevity. The views expressed in the paper are those of the authors and not necessary those of ABS.     

ISS-based robust adaptive fuzzy algorithm for maintaining a ship＇s track

This paper focuses on the problem of linear track keeping for marine surface vessels. The influence exerted by sea currents on the kinematic equation of ships is considered first. The input-to-state stability （ISS） theory used to verify the system is input-to-state stable. Combining the Nussbaum gain with backstepping techniques, a robust adaptive fuzzy algorithm is presented by employing fuzzy systems as an approximator for unknown nonlinearities in the system. It is proved that the proposed algorithm that guarantees all signals in the closed-loop system are ultimately bounded. Consequently, a ship＇s linear track-keeping control can be implemented. Simulation results using Dalian Maritime University＇s ocean-going training ship ＇YULONG＇ are presented to validate the effectiveness of the proposed algorithm.     

Test Scenario Design for Intelligent Driving System Ensuring Coverage and Effectiveness

Intelligent vehicle greatly benefits traffic safety, efficiency and driving comfortable. With the development of intelligent driving technology and its application, it is becoming increasingly important to do effective and comprehensive tests before putting on the market. Comprehensively considering the cost of test, an automatic generation method of test scenarios is proposed to ensure both coverage and effectiveness. Based on the analyzed key infuence factors of an intelligent driving system, the analytic hierarchy process (AHP) is used to determine their importance and accordingly an complex index is defined, based on which an improved test case generation algorithm based on the pairwise independent combinatorial testing tool (PICT) is proposed to ensuring both combinational coverage and complexity of test cases. Finally, the test scenario is generated by clustering these discrete test cases considering similarity and complexity. The high complex test cases are preferred to be combined together and conducted preferentially to increase the test efficiency. The effectiveness of this method is validated by applying it on a lane departure warning system (LDW).