Consideration of different travel strategies and choice set sizes in transit path choice modelling

Transportation - Path choice modelling is typically conducted by considering a subset of paths, not the universal set of all feasible paths as this is computationally challenging. This study...     

��·����������ͨ������Ӱ�����

通行能力预测是公路设施规划、设计与运营中的基础环节.本文基于埃及曼努菲亚省12条农村双车道路段数据,研究了公路线形等几何特征对通行能力的影响以及线形由切线变为平曲线时通行能力的损失.所选取的路段线形包括直线和随后的平曲线.同时,采集了各路段上车流量及速度数据,利用基于基本图的外推法研究流量和密度关系.路段上不同车型的车辆均转换为小客车当量.此外,针对不同情形（切线、平曲线及对应流量损失）,分别建立了最佳回归模型.结果表明,切线型道路的关键自变量是路宽、肩宽以及切线长;平曲线道路的关键变量是曲线半径和路宽.通行能力和几何特征关系最佳模型的自变量为曲线半径.本文的模型可用于分析评价农村双车道道路的通行能力,尤其是评价文中所研究路段的通行能力.     

Numerical analysis of the high skew propeller of an underwater vehicle

A numerical analysis based on the boundary element method (BEM) was presented for the hydrodynamic performance of a high skew propeller (HSP) which is employed by an underwater vehicle (UV). Since UVs operate at two different working conditions (surface and submerged conditions), the design of such a propeller is a cumbersome task. This is primarily due to the fact that the resistance forces as well as the vessel efficiency under these conditions are significantly different. Therefore, some factors are necessary for the design of the optimum propeller to utilize the power at the mentioned conditions. The design objectives of the optimum propeller are to obtain the highest possible thrust, minimum torque, and efficiency. In the current study, a 5-bladed HSP was chosen for running the UV. This propeller operated at the stern of the UV hull where the inflow velocity to the propeller was non-uniform. Some parameters of the propeller were predicted based on the UV geometrical hull and operating conditions. The computed results include the pressure distribution and the hydrodynamic characteristics of the HSP in open water conditions, and comparison of these results with those of the experimental data indicates good agreement. The propeller efficiency for both submerged and surface conditions was found to be 67% and 64%, respectively, which compared to conventional propellers is a significantly higher efficiency.     

采用耦合有限元、边界元方法的矩形储液舱中液体晃荡数值仿真(英文)

Sloshing of liquid can increase the dynamic pressure on the storage sidewalls and bottom in tanker ships and LNG careers. Different geometric shapes were suggested for storage tank to minimize the sloshing pressure on tank perimeter. In this research, a numerical code was developed to model liquid sloshing in a rectangular partially filled tank. Assuming the fluid to be inviscid, Laplace equation and nonlinear free surface boundary conditions are solved using coupled FEM-BEM. The code performance for sloshing modeling is validated against available data. To minimize the sloshing pressure on tank perimeter, rectangular tanks with specific volumes and different aspect ratios were investigated and the best aspect ratios were suggested. The results showed that the rectangular tank with suggested aspect ratios, not only has a maximum surrounded tank volume to the constant available volume, but also reduces the sloshing pressure efficiently.     

The Application of Linear Optimal Control Theory to the Design of Active Automotive Suspensions

Some linear stochastic control theory relevant to the design of active suspension systems subject to integrated or filtered white noise excitation is reviewed, and application of the theory to a particular problem is considered. The problem considered is the well known quarter car problem in which a control law which minimises a performance function representing passenger discomfort, suspension working space, and tyre load fluctuations is required. With full state feedback, the requirement for a formulation of the problem which leads to the system under consideration being observable and controllable is referred to, and it is shown how a well known coordinate transformation enables this requirement to be satisfied. With limited state (or output) feedback, problem formulations which will avoid potential numerical problems in deriving the optimal control are described. Example solutions are included in order to illustrate the methods.     

On the Performance Capabilities of Active Automobile Suspension Systems of Limited Bandwidth

Using methods established in earlier work, calculations are carried out to reveal the influence of actuator bandwidth on the performance capabilities of a class of active suspension system for automobiles. The suspension consists of an actuator in series with a spring, the combination being in parallel with a passive damper, and the system is modelled as a single wheel station traversing a random road. The results indicate that a system with a 3 Hz bandwidth actuator and variable damping will have excellent ride performance qualities over a wide range of road roughness conditions. Since such a system can be expected to be easily adaptable to the running conditions, to provide good static and dynamic attitude control, to be capable of contributing to good steering control responses and to be inexpensive in terms of capital and energy consumption costs compared with most of the active systems which have previously been discussed, it is suggested that it is a prime candidate for further study and practical development.     

Numerical Modeling of an Advanced Semi-SWATH Hull in Calm Water and Regular Head Wave

A small waterplane area twin hull (SWATH) has excellent seakeeping performance and low wave-making resistance, and it has been applied to small working craft, p...     

双隔板矩形液舱内抑制晃荡的优化研究（英文）

A dual-baffled rectangular tank with different configurations is proposed to reduce the sloshing effect, and design optimization is conducted through numerical simulations with open-source software, namely Open FOAM, based on the computational fluid dynamic model. A series of physical experiments in the dual-baffled rectangular tank is performed for model validation and design optimization with the measured water surface elevation distributions along the tank. The optimization uses the calculate...     

保证耐波性能的目标函数的Wigley船型优化(英文)

The research performed in this paper was carried out to investigate the computational procedure to design seakeeping optimized ship hull form. To reach the optimized hull form, four stages should be done, which consists of: generate alternative hull form, seakeeping calculations, objective functions and optimization techniques. There are many parameters that may be determined in ship hull form optimization. This paper deals with developed strip theory for determining the seakeeping performance, genetic algorithm(GA) as optimization method, high order equations for curve fitting of the hull form and finally reaching to the minimum bow vertical motion in regular head waves. The Wigley hull is selected as an initial hull and carried to be optimized. Two cases are considered. For the first case, the only form coefficients of the hull(C B, C M, C W, C P) are changed and main dimensions(L, B, T) are fixed. In the second case both hull form and main dimensions are varied simultaneously. Finally, optimized hull form and its seakeeping performances are presented. The results of optimization procedure demonstrate that the optimized hull forms yield a reduction in vertical motion and acceleration.