Stochastic analysis of the variation in injury numbers of automobile frontal crash tests

Although automobile crash test data have a comparatively large variation because of the complexity of the tests, only a limited number of crash tests are usually conducted due to monetary and time limitations. Thus, it is necessary to control input variables that cause the variation in test data to obtain consistent crash test results and to correctly assess the safety performance of an automobile under development. In this study, a MADYMO model was validated deterministically to yield the head, chest, pelvis deceleration pulses of anthropomorphic test devices and the belt load pulses similar to those from actual tests, and it was also validated stochastically to yield means and standard deviations of the head and chest injury numbers, i.e., HIC ₁₅ and 3 msec clip similar to those from actual tests. A stochastic analysis was conducted using the validated MADYMO model to calculate the sensitivity of the standard deviations of the injury numbers to the standard deviations of influential input variables to determine the most influential input variable that makes the largest contribution to the variation in the injury numbers. Moreover, the Taguchi approach was used to determine the optimal values of the influential input variables to improve safety performance.     

Age and cross-cultural comparison of drivers’ cognitive workload and performance in simulated urban driving

Driving demands significant psychomotor attention and requires even more when drivers are engaged in secondary tasks that increase cognitive workload and divert attention. It is well established that age influences driving risk. Less is known about how culture impacts changes in attention. We conducted parallel driving simulations in the US and Korea to measure the extent to which age and culture influence dual-task performance. There were 135 participants divided into two groups: a younger group aged 20∼29, and an older group aged 60∼69. Whereas some differences by culture appeared in absolute control measures, the younger participants showed similar mean velocity and compensatory patterns associated with increased cognitive load in the urban setting; however, the results from the older samples were less similar.     

Optimizing the shape of a bumper beam section considering pedestrian protection

This paper presents a design technique to optimize the shape of a vehicle bumper beam that satisfies both the safety requirements for a front rigid-wall impact and the regulations protecting pedestrians from lower leg injuries caused by bumper impacts. An intermediate response surface modeling (IRSM) technique was introduced to approximate the non-linear force-displacement curves obtained from the front impact analysis of a vehicle bumper. The accuracy of the IRSM model was tested by comparing its results with those of the non-linear finite element analysis. The maximum displacement error between the two models did not exceed 3%. Using pedestrian impact analyses based on the experimental arrangement of the Plackett-Burman design, the approximate functions describing the response values acting on the lower legs were calculated. The shape of the bumper beam was optimized by integrating the IRSM with the force-displacement model and the approximate functions on lower leg impact. The optimization results satisfied safety regulations on the maximum allowable displacement of the vehicle bumper, and also the regulations protecting pedestrians from lower leg injuries caused by bumper impacts.     

Active coolant control strategies in automotive engines

The coolant flow rate in conventional cooling systems in automotive engines is subject to the mechanical water pump speed, and high efficiency in terms of fuel economy and exhaust emission is not possible given this limitation. A new technology must be developed for engine cooling systems. The electronic water pump is used as a substitute for the mechanical water pump in new engine cooling systems. The new cooling system provides more flexible control of the coolant flow rate and engine temperature, which previously relied strongly on engine driving conditions such as load and speed. In this study, the feasibility of two new cooling strategies was investigated using a simulation model that was validated with temperatures measured in a diesel engine. Results revealed that active coolant control using an electronic water pump and valves substantially contributed to a reduction of coolant warm-up time during cold engine starts. Harmful emissions and fuel consumption are expected to decrease as a result of a reduction in warm-up time.     

Traffic-balancing algorithm for can systems with dual communication channels to enhance the network capacity

The controller area network (CAN) is the dominant protocol for in-vehicle network (IVN) systems because it provides bounded transmission delay among electronic control units (ECUs) at data rates between 100 Kbps and 1 Mbps. Many automotive companies have chosen the CAN protocol for their chassis network system of intelligent vehicles. However, the increasing number of ECUs in intelligent vehicles and the need for more intelligent functions require a network system with more network capacity and real-time capability. As one approach to enhance the network capacity of a CAN system, this paper introduces a CAN system with dual communication channels. This paper also presents a traffic-balancing algorithm that predicts the traffic of each channel and allocates frames to the most appropriate channel. An experimental testbed using commercial off-the-shelf microcontrollers with two CAN controllers was used to demonstrate the feasibility of the traffic-balancing algorithm.     

Development of the Sungkyunkwan University Driving Simulator (SKUD) for Human-Machine Interface studies of Car Navigation Systems

Driving simulators are useful tools that can be used not only to test the components of future cars, but also to evaluate the telematics service and HMI (Human-Machine Interface). However, driving simulators that are currently available cannot be implemented to test and evaluate a real commercial telematics service system because the GPS (Global Positioning System), which contains basic functional support for the telematics module, does not work in the VR (virtual reality) environment. A driving simulator, together with the GPS simulator, can be used to study the HMI to evaluate commercial CNS (Car Navigation Systems). In this paper, Sungkyunkwan University Driving Simulator (SKUD) is developed with a GPS simulator that is able to emulate GPS satellite signals and includes the NMEA-0183 protocol and RS232C communication standards. Furthermore, using the SKUD, the HMI of the real commercial CNS could be investigated with driver workload assessment methods.     

License plate location method unaffected by variation in size and aspect ratio

License plate location is a challenging task that is necessary for automatic vehicle identification. This paper presents a new method for locating a license plate when its size and aspect ratio are highly variable. The proposed method begins with an assumption that a license plate exists in a region where dense edges are located. We define an edge region as an area containing rich edges. The edge regions are created by dilating vertical edges, and they are classified into one of four types: left fragment type, right fragment type, whole type, and undefined type. The candidates for a license plate region are constructed by merging edge regions. Knowing what type of edge region is being examined is useful in the merging process. Finally, we verify whether each candidate contains a license plate or not by using the character arrangement information. The arrangement pattern is determined by the size of connected components and by the vertical overlap or horizontal distance between two neighboring components. Experimental results show that the proposed method gives robust results regardless of any variation in the size and aspect ratio of license plates.     

新安船装载的紫檀木和国际贸易

在新安船上装载的与新安船的交易活动范围有关的商品中,最突出的是陶瓷器、铜钱和紫檀木,紫檀木是从属于热带以及亚热带的东南亚购入的,而当时前往东南亚、印度、阿拉伯地区的中国商船主要从泉州港出发.由于泉州湾宋代海船的出土,新安船被认为是在福建地区制造的泉州船舶.新安船是以东南亚和中国以及东北亚作为活动舞台的贸易船,在向最终目的地日本博多航行过程中,经过高丽沿岸时遇难,最终没能返回.新安船装载的1017根紫檀木,是把新安船的研究范围扩大到中国和日本以外的东南亚和西域的重要资料.     

Investigation of the shear flows over a sunroof opening based on a linear inviscid instability analysis

The large-scale shear flows over the sunroof opening of a mid-sized SUV measured using a PIV system were investigated. The shear flows were measured for five different cases of deflector protrusion (one case was the baseline test without deflector) at two different free stream flow velocities below the critical velocity where the buffeting noise level reached a maximum. The structures of the shear flows were observed to differ, apparently depending on whether the radiated buffeting noise is relatively strong or not. For strongly buffeting experimental cases, the momentum thicknesses of the shear layers were observed to grow rapidly and saturated at a station near the downstream edge of the sunroof opening, where the saturation of the transverse velocity fluctuations was also observed, and where the vortex coalescence process was presumably completed. On the other hand, no discrete large-scale vortex structures were observed for none-buffeting or weakly buffeting cases. Streamwise growth of the velocity fluctuations was found to be well predicted by a linear hydrodynamic instability analysis for the strongly buffeting cases. Numerical results obtained from a linear inviscid instability analysis using a hyperbolic tangent mean velocity profile were used to calculate the amplification factors with the initial momentum thickness and the streamwise fluctuation wavenumber. The shear flows were found to form large-scale discrete vortices when the linear inviscid amplification factors exceeded a threshold amplification factor.     

Effects of mixture stratification on HCCI combustion of DME in a rapid compression and expansion machine

Compression ignition of homogeneous charges in internal combustion (IC) engines is expected to offer high efficiency of DI diesel engines without high levels of NOx and particulate emissions. This study is intended to find ways of extending the rich limit of HCCI operation, one of the problems yet to be overcome. Exhaust emissions characteristics are also explored through analyses of the combustion products. DME fuel, either mixed with air before induction or directly injected into the combustion chamber of a rapid compression and expansion machine, is compressed to ignite under various conditions of compression ratio, equivalence ratio, and injection timing. The characteristics of the resulting combustion and exhaust emissions are discussed in terms of the rate of heat release computed from the measured pressure, and the concentrations of THC, CO, and NOx are measured by FT-IR and CLD. The experimental data to date show that operation without knock is possible with mixtures of higher equivalence ratio when DME is directly injected rather than when it is inducted in the form of a perfectly homogeneous fuel-air mixture. Although fuel injected early in the compression stroke promotes homogeneity of the DME-air mixture in the cylinder, it causes the mixture to ignite too early to secure good thermal efficiency and knock-free operation at high loads. Low temperature reactions occur at about 660K regardless of the fueling methods, fuel injection timing and equivalence ratio. The main components of hydrocarbon emissions turned out to be unburned fuel (DME), formaldehyde and methane.