Some insights in novel risk modeling of liquefied natural gas carrier maintenance operations

This study discusses the analysis of various modeling approaches and maintenance techniques applicable to the Liquefied Natural Gas (LNG) carrier operations in the maritime environment. Various novel modeling techniques are discussed; including genetic algorithms, fuzzy logic and evidential reasoning. We also identify the usefulness of these algorithms in the LNG carrier industry in the areas of risk assessment and maintenance modeling.     

Enabling a viable technique for the optimization of LNG carrier cargo operations

In this study, we optimize the loading and discharging operations of the Liquefied Natural Gas (LNG) carrier. First, we identify the required precautions for LNG carrier cargo operations. Next, we prioritize these precautions using the analytic hierarchy process (AHP) and experts’ judgments, in order to optimize the operational loading and discharging exercises of the LNG carrier, prevent system failure and human error, and reduce the risk of marine accidents. Thus, the objective of our study is to increase the level of safety during cargo operations.     

The jurisdictional challenges to the prosecution of piracy cases in Kenya: mixed fortunes for a perfect model in the global war against piracy

Since 2008 Kenya has distinguished itself in the global war against piracy by undertaking prosecutions in the national courts of suspected pirates arrested in the high seas and handed over by navies of leading maritime nations under bilateral agreements (MOUs) entered into between Kenya and these leading maritime nations. As of July 2011, Kenya had over 20 convicted pirates serving jail terms ranging between 7 and 20 years and over 100 suspected pirates awaiting trial in national courts. This is the largest number of suspected pirates held and tried in any one state at any given time in modern history. To achieve this, Kenya had to effect far reaching changes in the law. In the initial stages, suspected pirates were charged under Kenya’s Penal Code (Cap 63 Laws of Kenya). However, the high court in the case of Re Mohamud Mohamed Dashi and eight others [2010] eKLR, ruled that Kenya had no jurisdiction to try suspected pirates under that law. In September 2009, Kenya passed a new law (the Merchant Shipping Act), which not only defined more comprehensively and extensively the offence of piracy, but also extended the jurisdiction of Kenyan courts to try piracy committed by non-nationals. Though the law gives Kenya a very broad jurisdiction to try suspected pirates, the process is still fraught with challenges due to lack of financial and human resources. In the case of Republic vs Hassan Jama Haleys Alias Hassan Jamal and five others [2010] eKLR, the court commented thus:

“… I must note that the ‘piracy trials’ have presented a unique challenge to the Kenyan legal system. We cannot ignore the fact that these are suspects who having been arrested by foreign naval forces on the High Seas are brought to Kenya for trial. They are strangers in the country, do not understand the legal system, may not know what their rights are and do not understand the language… the Kenyan Government and the International partners supporting these trials put in place a system to provide free legal representation for the suspects…”     

Personalization method of e-catalog based on user interesting degree

The user interesting degree evaluation index is designed to fulfill the users’ real needs, which includes the user’ attention degree of commodity, hot commodity and preferential commodity. User interesting degree model (UIDM) is constructed to justify the value of user interesting degree; the personalization approach is presented; operations of add and delete nodes (branches) are covered in this paper. The improved e-catalog is more satisfied to users’ needs and wants than the former e-catalog which stands for enterprises, and the improved one can complete the recommendation of related products of enterprises.     

Simulation of mixed gas formation for a spray-wall complex guided LPG direct injection engine

To obtain an ultralean air-fuel ratio and to reduce engine-out NOX and HC emissions induced by the richer mixture near the spark plug, a spray and wall complex guided combustion system has been developed by utilizing the fuel characteristics of LPG. The new combustion system configuration is optimized by using a commercial CFD code, FIRE V2013, and the reliability of the system has been experimentally demonstrated by Plane Laser-Induced Fluorescence (PLIF). The mixture formation in the new combustion system under part load (2,000 rpm) is numerically simulated. With an injection timing of 40°CA BTDC, the LPG spray which is injected from two upper holes, reaches the ignition point, and the other part of the LPG spray which is injected from the bottom hole, is directed to the ignition point through the vertical vortices at the same time. At the ignition timing of about 20°CA BTDC, the two-part mixtures have been shown to form a stable and richer stratified mixture around the ignition point, and the maximum global air-fuel ratio reaches to 60: 1.     

Integrated approach to an optimal automotive timing chain system design

Ensuring engine efficiency is a crucial issue for automotive manufacturers. Several manufacturers focus on reducing the time taken to develop and introduce brand new vehicles to the market. Thus, a synergic approach including various simulations is generally adopted to achieve a development schedule and to reduce the cost of physical tests. This study involved proposing a design process that is very useful in the preliminary development stage through effective support from simulations. This type of simulation-based design process is effective in developing timing chain drives; the use of this process, based on results from multiple trials, showed improvements in performance including low friction and vibration, improved durability, and cost-effective part design when compared to conventional processes. This study proposes an integrated approach to the preliminary design of an automotive timing chain system. The approach involves structural and dynamic analyses. The details of the design process are described by using the case of a virtual engine. This study conducted and summarized a dynamic and structural analysis as well as topological optimization to describe a process to obtain optimal results. The results of this study indicated the following improvements in overall performance factors: 12.1 % improvement in transmission error, 10.1 % reduction in chain tension, 46 % reduction in tensioner arm weight, and 11 % reduction in transversal displacement.     

Approximate optimal AUTOSAR software components deploying approach for automotive E/E system

The AUTOSAR has been developed as the worldwide standard for automotive E/E software systems, making the electronic components of different suppliers to be employed universally. However, as the number of component-based applications in modern automotive embedded systems grows rapidly and the hardware topology becomes increasingly complex, deploying such large number of components in automotive distributed system in manual way is over-dependent on experience of engineers which in turn is time consuming. Furthermore, the resource limitation and scheduling analysis make the problems more complex for developers to find out an approximate optimal deploying approach in system integration. In this paper, we propose a novel method to deploy the AUTOSAR components onto ECUs with the following features. First, a clustering algorithm is designed for deploying components automatically within relatively low time complexity. Second, a fitness function is designed to balance the ECUs load. The goal of our approach is to minimize the communication cost over all the runnable entities while meeting all corresponding timing constraints and balancing all the ECUs load. The experiment results show that our approach is efficient and has well performance by comparing with other existing methods in specific and synthetic data set.     

论个人所得税税制模式改革

文中介绍了现行个人所得税中存在的问题,提出进行“综合征收模式”改革的必要性、合理性以及实行条件。     

Modeling research on manufacturing execution system based on large-scale system cybernetics

A cybernetics model of manufacturing execution system(MES CM) was proposed and studied from the viewpoint of cybernetics.Combining with the features of manufacturing system, the MES CM was modeled by"generalized modeling"method that is discussed in large-scale system theory.The mathematical model of MES CM was constructed by the generalized operator model, and the main characteristics of MES CM were analyzed.