软土地基水下真空预压固结离心模型试验

采用新发明的真空吸水系统应用于离心机中,可以使土体产生向上渗流并模拟软土地基真空预压。为获得理想的水下真空预压固结对比效果,竖井采用2种不同井间距的砂井,密封膜采用完全覆盖的形式。用发明的装置产生水下真空得以模拟软土水下固结行为。介绍了模型制作、试验程序及真空发生系统,并分析了孔隙水压力、变形、不排水剪切强度的改变和不同井间距对固结速率的影响。     

Implementing green supply chain practices: an empirical investigation in the shipbuilding industry

ABSTRACT

Environmental concerns have become important in the shipbuilding industry. Governmental expectations about environmental and social performance are much higher than in the past. Public authorities penalize companies that do not comply with the rules. Shipbuilding companies face these challenges by introducing new technologies into their business processes. They do not only start initiatives to green their own business processes but also those of their supply chain partners. This form of environmental management is called Green Supply Chain Management (GrSCM) and its importance is increasingly recognized. Although GrSCM is growing, companies are experiencing difficulties engaging suppliers in environmental activities.

This empirical study analyses drivers for supply chain participation of suppliers in the shipbuilding industry. We explain the participations of suppliers in GrSCM practice by investigating influencing factors including governmental involvement in greening the supply chain, customer requirements towards green issues, feeling of social responsibility, competitive advantage by going green, and GrSCM readiness. Hypotheses are tested with partial least squares, using survey data of 93 suppliers of two leading shipbuilding companies. We found GrSCM readiness, competitive advantage, and social responsibility to be significant drivers in supplier participation. No significant support was found for governmental involvement and customer requirements.     

Equilibria of bilateral taxi–customer searching and meeting on networks

This paper proposes an equilibrium model to characterize the bilateral searching and meeting between customers and taxis on road networks. A taxi driver searches or waits for a customer by considering both the expected searching or waiting time cost and ride revenue, and a customer seeks a taxi ride to minimize full trip price. We suppose that the bilateral taxi–customer searching and meeting occurs anywhere in residential and commercial zones or at prescribed taxi stands, such as an airport or a railway station. We propose a meeting function to spell out the search and meeting frictions that arise endogenously as a result of the distinct spatial feature of the area and the taxi–customer moving decisions. With the proposed meeting function and the assumptions underlying taxi–customer search behaviors, the stationary competitive equilibrium achieved at fixed fare prices is determined when the demand of the customers matches the supply of taxis or there is market clearing at the prevailing searching and waiting times in every meeting location. We establish the existence of such an equilibrium by virtue of Brouwer’s fixed-point theorem and demonstrate its principal operational characteristics with a numerical example.     

Evaluating locational accessibility to the US air transportation system

Although there are hundreds of airports that support commercial air passenger traffic in the United States (US), not all areas are equivalently served by the commercial air transportation system. Locations in the US differ with respect to their level of access to the commercial air network and their overall accessibility within the system. Given the complexity of the domestic commercial air passenger network and supporting infrastructure, past research has only been able to provide a limited assessment of locational accessibility within the United States. To address these complexities, this paper proposes a new metric that incorporates measures of access to air transport as well as accessibility within air transportation networks. Using a comprehensive dataset on scheduled airline service, the developed approach is then applied to the US domestic commercial passenger air transportation network to explore geographic differentials in accessibility. Results suggest marked differences between core-based statistical areas throughout the US.     

Vibration reduction of H/Shaft using an electromagnetic damper with mode change

The objective of this study is to develop a damper that can reduce the amplitude of vibration in various frequency ranges. Previous H/Shaft vibration reduction methods work in a passive way. A dynamic damper reduces the amplitude of vibration at its first mode, but vibration still appears at the second mode. A mass damper or hollow shaft can shift the natural frequency to a lower or higher region. The fixed operating frequency prevents vibration from being reduced outside the operating frequency range. The proposed damper uses electromagnets as either masses or actuators to change the damper mode between dynamic damper mode and mass damper mode. The electromagnetic damper (EMD) can change its mode to respond to the vibration excitation at both low and high frequencies. The vibration reduction performance was evaluated by FRF tests in laboratory and vehicle conditions. The results were compared with those of a dynamic damper and indicate that the amplitude of vibration is reduced by 95.6 % when the EMD is implemented on an H/Shaft, whereas only 61.9 % vibration reduction is achieved by the dynamic damper.     

Effect of nozzle orifice diameter on diesel spray tip penetration according to various spray models for CFD simulation with widely varying back pressure

CFD simulations of spray tip penetration with the standard KIVA3V, ‘original gas jet’ and ‘Normal gas jet profile with breakup length formula’ (NGJBL) spray models were performed to investigate the effects of nozzle orifice size and ambient gas density combinations on the spray penetration. The accuracy of the CFD simulation results was estimated by comparing them with available experimental data. The ambient gas density was varied in 12 kg/m³ intervals from 12 to 69 kg/m³ for each nozzle orifice diameter. The nozzle orifice diameters used were 119, 140, 183 and 206 mm. A total of 20 cases in the CFD simulations were considered with combinations of the 4 nozzle orifice diameters and 5 ambient gas densities. CFD simulations with the NGJBL spray model were more accurate than those with either the standard KIVA3V or gas jet spray models as the nozzle orifice diameter and ambient gas density was increased. The NGJBL and original gas jet model is more effective in predicting the spray tip penetration near the nozzle tip region.     

Structural Optimization and Strength Analysis of the Lifting Arm of a Wet Shotcrete Spraying Unit北大核心CSCD

Wet shotcrete spraying units are widely used in underground engineering, for railways, highways, water conservancy and hydropower stations, municipal works, mining and military and other industries. Structural analysis and mechanical behavior optimization are conducted regarding the lifting arm of a TKJ series shotcrete spraying unit, and optimization of the hinge point position and working scope of the lifting arm is realized. The optimal layout scheme for the hinge force is given based on the Monte Carlo method, the hinge force of the lifting arm is improved for the mean and maximum values, and the maximum and average hinge force of the lifting cylinder decrease by 23.14% and 7.70%, respectively, compared with that of the original scheme. The static strength is checked using Ansys-Workbench for the optimized scheme, and the results show that the optimized scheme has a larger safety re-serve and that the structural design is more reasonable than the original scheme. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Review on characterization of nano-particle emissions and PM morphology from internal combustion engines: Part 1

This paper is review of the characterization of exhaust particles from state-of-the-art internal combustion engines. We primarily focus on identifying the physical and chemical properties of nano-particles, i.e., the concentration, size distribution, and particulate matter (PM) morphology. Stringent emissions regulations of the Euro 6 and the LEV III require a substantial reduction in the PM emissions from vehicles, and improvements in human health effects. Advances in powertrains with sophisticated engine control strategies and engine after-treatment technologies have significantly improved PM emission levels, motivating the development of new particle measurement instruments and chemical analysis procedures. In this paper, recent research trends are reviewed for physical and chemical PM characterization methods for gasoline and diesel fueled engines under various vehicle certification cycles and real-world driving conditions. The effects of engine technologies, fuels, and engine lubricant oils on exhaust PM morphology and compositions are also discussed.     

Inventory,Classification, and Analysis of Special Management Areas Associated with U.S. Coastal Programs

Area-based management approaches may be beneficial in integrating sectoral, single-purpose laws and regulations; however, these benefits may not be attained if special area designations are equally sectoral or single-purpose in nature. Over 60 types of special management areas were documented under U.S. coastal programs, and a new classification scheme was developed to allow comparisons and analyses across programs. Results indicate that requirements and incentives for special area designations under the Coastal Zone Management Act did little to standardize or influence area-based management systems associated with state and territory coastal programs. Further, the absence of clear patterns within and between coastal programs with respect to special area policies suggests a limited commitment to this important aspect of coastal management. Continued research is needed to document the effectiveness of the various area-based management approaches presented in this article.