Effect of interference fits on the fatigue lives of bolted composite joints

The effect of interference fits on the fatigue lives of bolted composite joints is investigated by conducting mechanical tests. Static and fatigue tests are carried out on specimens made of carbon-bismaleimide composites joined together as double-lap single-bolt joints. The bolts having interference fits ranging of 0 (neat fit), 0.5%, 0.75% and 1% are performed. The results demonstrate the relationship between fatigue life and different values of interference fits. After the fatigue tests, non-destructive evaluation (NDE) and scanning electron microscope (SEM) are used to observe the damage of the surrender and surface of the hole. The test results show that the interference fitted specimens have improved fatigue life compared to the neat fitted specimen. The NDE and SEM results reveal that the damage degree of interference fitted specimen is weaker than that for the neat fitted one.     

浙江海事:奏响助力复工复产“春耕曲”

阳春三月,暖意浓浓。伴随着机器作业的轰鸣声,浙江舟山舟岱跨海大桥3座通航孔桥共计16台桥面吊机全部吊装安放并相继投入使用,标志着舟岱跨海大桥将全线进入到通航孔桥桥面吊装的全面冲刺阶段。"今天有返工人员吗?""体温测量工作完成了吗?有无体温异常人员?"3月15日.     

A finite pointset method for the numerical simulation of free surface flow around a ship

In this paper, we present a Finite pointset method (FPM) for the numerical simulation of free surface flow around a ship in calm water. It is a Lagrangian and meshless particle scheme which is applied to the projection method for the incompressible governing equations. This requires the solution of Poisson problems in each time step, so a moving least squares (MLS) interpolants is used for the spatial derivatives in order to discretize the Poisson equation with pressure-Dirichlet condition of free surface flow in meshless structure. Meanwhile, an additional problem of the periodic particle locations redistribution in the present approach is still handled by MLS interpolants. With the proposed FPM technique, problems associated with the free surface flow around a ship are circumvented. A verification of numerical modeling is made using the Wigley hull and the validity of the proposed methodology is examined by comparing the detail of wave profile and wave-making resistance with Series 60 model. The results demonstrate that FPM is able to perform efficient and stable simulations of free surface flow around a ship.     

海洋核动力平台电力系统设计概要

中国正在进行的海洋核动力平台国家示范工程项目,其电力系统设计存在着新的问题。本文以海洋核动力平台的需求为立足点,充分兼顾核电站的设计要求以及船舶入级的要求,归纳了适用于海洋核动力平台电力系统设计的要点,对海洋核动力平台的工程设计和新标准规范的制定具有较强的参考意义。     

一种基于动态分析的突变和异常波动预警方法

针对模拟量的突变和异常波动预警,给出一种基于动态分析的、可以应用于各种模拟量的统一预警方法,该方法已被应用于CSM-TH型集中监测程序和智能分析系统中,在多条线700余站现场运行的7年中,收到良好效果,得到用户认可。     

大倾角中厚煤层软弱顶底板柔性护巷技术

在大倾角中厚煤层沿空留巷中,以往的支护方式难以满足大倾角中厚煤层巷道特殊的围岩结构稳定的需要,同时无法适应工作面内矸石垮落造成留巷困难。文章针对这一难题,首次提出并采用了"柔性护巷"技术,通过利用巷道上帮形成的由垮落矸石堆积在特制钢筋网上的"包护带",允许巷道顶板有一定的下沉量,从而使矸石充分为巷道顶板组合岩梁结构提供支撑力。在总结其施工工艺的基础上,通过现场试验,研究了巷道矿压显现规律、顶板移动规律、矸石垮落堆积规律和钢筋网变形规律;实验结果表明,在利用锚、网、索、支柱联合支护的基础上,应用"柔性护巷"技术能有效地解决大倾角中厚煤层沿空留巷技术难题。     

柴油机活塞销孔型线对比分析研究

针对某柴油机活塞销孔的磨损问题,分别借助有限元方法和EHD仿真方法研究了不同销座结构匹配多种销孔型线对接触应力的影响,及不同活塞销孔型线对润滑特征评价参数的影响。综合研究表明,活塞销孔型线与热变形匹配不合理所引起的润滑状态恶化是导致活塞销孔磨损的直接原因,因此通过合理调整销孔型线可使接触应力均匀,润滑状态良好,并有效降低活塞销座磨损风险。     

进气掺氢与富氧燃烧对汽油机性能影响的试验研究

在JL3G10汽油机的基础上,搭建了发动机台架以进行掺氢富氧条件下的台架试验。利用该台架分别对不同进气含氧量(体积比),不同进气掺氢比以及富氧掺氢时汽油机的动力性与排放进行了试验研究。研究表明:相比原机,进气含氧量为25%时汽油机功率与扭矩提高了20.7%,HC排放减少36%,CO排放减少10.6%,但NOx排放增加了149.6%;2%进气掺氢比下的HC排放相比原机降低31.2%,CO排放降低46.1%,NOx排放则增加12.6%;富氧掺氢(氢氧体积比为2∶1)时,掺混比例为5.06%的汽油机较原机在动力性与排放上均有提升。     

Identity-based broadcast encryption with shorter transmissions

This paper describes two identity-based broadcast encryption(IBBE) schemes for mobile ad hoc networks.The first scheme proposed achieves sub-linear size cipertexts and the second scheme achieves O(1)-size ciphertexts.Furthermore, when the public keys are transmitted, the two schemes have short transmissions and achieve O(1) user storage cost, which are important for a mobile ad hoc network.Finally, the proposed schemes are provable security under the decision generalized bilinear Di?-Hellman(GBDH) assumption in the random oracles model.     

TNFα、Leptin-Rb、NF-κB和PPAR-γ在酒精性肝病大鼠肝细胞中的表达

目的 探讨TNFα、NF-κB、Leptin-Rb和PPAR-γ等在大鼠酒精性肝病中与肝组织炎症、坏死和纤维化的关系.方法 胃造瘘法建立长期大鼠酒精性肝病模型,分别在第4、8、12、24和52周用免疫组化、原位杂交和RT-PCR技术检测不同阶段大鼠肝组织中TNFα、NF-κB、PPAR-γ和Leptin-Rb等的表达.结果 TNFα、NF-κB和Leptin-Rb水平在模型组大鼠肝细胞中,第8周表达逐渐增强,第24周起高水平表达一直持续至52周(P<0.01).PPAR-γ在对照组和第4、8周模型组肝细胞中表达最强,第12周表达开始减弱.TNFα和NF-κB在肝细胞中的表达呈明显正相关关系,与PPAR-γ则呈负相关关系(P<0.01).结论 TNFα和NF-κB与肝细胞病变程度有很好的一致性关系,Leptin-Rb在肝细胞的表达与肝纤维化发展相一致,PPAR-γ则刚好相反.