Study on T lymphocyte subsets and NK cells in patients with Graves＇ disease combined with type 2 diabetes

Objective To investigate changes in T lymphocyte subsets and NK cells in patients with simple Graves' disease (GD)and Graves' disease combined with type 2 diabetes mellitus (GD/T2DM). Methods Fifteen cases of GD/ T2DM were selected from our hospital from November 2001 to November 2004. Before and after therapy thyroid function, thyroglobulin antibody (TGA), thyroid microsomal antibody (TMA) and blood glucose level were measured, and T lymphocyte subsets (CD3, CD4, CD8, CD4/CD8) and NK cells (CD56) were measured by immunofluorescence double labeling monoclonal antibody and flow cytometry, respectively. At the same time, comparison was made with simple GD (15 cases), T2DM (15 cases) and healthy control (20 cases). Results Before therapy, CD4/CD8, CD4 and NK cells in GD/T2DM were less than normal, and there was no significant difference in comparison with simple GD (P<0.05). In T2DM group, only CD4/CD8 and CD4 were less than those of healthy controls (P<0.05). When thyroid function recovered after 1 to 3 months of methimazole treatment in both GD/T2DM and simple GD groups, various indexes recovered, which were more obvious in simple GD. Conclusion Immune hypofunction of GD may be the key to the immune abnormality of GD/T2DM, which is more significant than that of simple GD or T2DM. The recovery of thyroid function and immune abnormality is not consistent, and the recovery of GD is more significant than that of GD/T2DM.     

长江口北槽河槽地形变化及深水航道回淤特征分析

以长江口北槽航道为研究对象,利用1997年12月~2013年2月多年实测水深资料和北槽深水航道一期工程开通以来维护疏浚资料,采用统计分析与对比方法分析了北槽河槽多年来的地形冲淤变化和一、二、三期航道航槽回淤特征。研究结果显示:(1)在此期间,在北槽上段北侧滩面和坝田大范围淤积,下段南侧滩面和坝田大范围淤积,北槽拐弯段为北槽淤积集中区域,河槽向窄深方向发展;(2)北槽航道年回淤量大,三期12.5 m航道期间,北槽航道年回淤量在6 400万m3左右;(3)北槽航道回淤沿程分布差异大,北槽中段(H~O疏浚单元)的回淤量占北槽航道段回淤量的70%左右;(4)北槽航道洪季和枯季回淤差异大,洪季期间的回淤量占全年该段航道回淤量的80%以上;(5)北槽航道南北回淤差异大,南侧淤积高于北侧淤积400~1 300万m3;(6)北槽12.5 m航道与10 m航道相比,全年回淤量有较大增加,洪季期间的回淤比重有所增大,北槽中段回淤峰值更加突出,略有所下移。     

盐度层化对长江口水动力的影响

基于FVCOM三维水动力及盐度模型,在考虑盐度层化和不考虑盐度层化两种条件下对长江口附近海域进行了水动力盐度数值模拟。计算结果表明,盐度层化产生的紊动抑制对垂向紊动粘滞系数和水平流速有较明显的影响。与不考虑盐度层化的计算结果相比,考虑盐度层化后,垂向紊动粘滞系数变小,流速垂向平均值变大,表层流速变大,底层流速变小,与实测值更为吻合。     

飞机防冰腔结构参数的重要性测度

分析了常见的3种飞机防冰腔结构,应用Gambit软件建立了双蒙皮防冰腔结构网格模型。采用Spalart-Allmaras湍流模型模拟热气在防冰腔内的流动状况,采用Fluent软件进行传热效率分析,建立了防冰腔结构参数对传热效率的重要性测度模型。通过随机响应面法建立防冰腔结构参数与传热效率的函数关系,采用低分散性抽样法求解防冰腔结构参数的重要性测度,建立了防冰腔结构参数的重要性测度分析流程。分析结果表明:当笛形管中心到外蒙皮的距离从35.15mm增加到38.85mm时,传热系数由0.505减小到0.463;当双蒙皮通道高度从2.85mm增加到3.15mm时,传热系数由0.495减小到0.476;当射流孔孔径从1.90mm增加到2.10mm时,传热系数从0.505减小到0.494;当射流孔角度从14.25°增加到15.75°时,传热系数从0.476增加到0.494。防冰腔结构参数的重要性排序依次为射流孔角度、笛形管中心到外蒙皮距离、射流孔孔径、双蒙皮通道高度,在防冰腔结构加工与装配过程中,需要重点考虑射流孔角度与笛形管中心到外蒙皮距离这2个参数。     

基于数值模拟的钛合金锯齿状切屑研究

切削加工中切屑成形是一种典型的大变形问题,它涉及到材料非线性、几何非线性以及边界非线性等问题。本文利用DEFORM-2D对钛合金(Ti6Al4V)进行了锯齿状切屑形成过程的有限元模拟,分析了切削过程中的应力场、应变场及温度场,探讨了锯齿状切屑的形成机理,获得了切削参数对锯齿状切屑形态的影响规律,为优化切削参数、提高刀具寿命提供了参考。     

恒温热源条件下实际回热式布雷顿循环的功率密度特性

用有限时间热力学方法分析恒温热源条件下实际回热式布畦顿循环的功率密度特性,计入工质与高,低温侧换热器的热阻损失,压气机,涡轮机的不可逆压缩和膨胀损失,以及管路系统中的压力损失,导出了功率密度与压比间的解析式,并通过数值计算将对应于最大功率密度时的一些参数与对应于最大功率时的同样参数进行了比较。     

Large-scale evacuation network optimization: a bi-level control method with uncertain arterial demand

To improve the efficiency of large-scale evacuations, a network aggregation method and a bi-level optimization control method are proposed in this paper. The network aggregation method indicates the uncertain evacuation demand on the arterial sub-network and balances accuracy and efficiency by refining local road sub-networks. The bi-level optimization control method is developed to reconfigure the aggregated network from both supply and demand sides with contraflow and conflict elimination. The main purpose of this control method is to make the arterial sub-network to be served without congestion and interruption. Then, a corresponding bi-objective network flow model is presented in a static manner for an oversaturated network, and a Genetic Algorithm-based solution method is used to solve the evacuation problem. The numerical results from optimizing a city-scale evacuation network for a super typhoon justify the validity and usefulness of the network aggregation and optimization control methods.     

“工厂法”沉管隧道早期性能的足尺试验研究

由于沉管隧道管段体积大、结构形式复杂、施工工艺复杂,容易因温度、收缩以及约束等原因,造成管段结构在预制阶段出现危害性裂缝,进而影响结构的服役性能和耐久性能。文章依托在建港珠澳大桥沉管隧道工程实例,开展了足尺试验,对"工厂法"沉管管节关键部位的温度和应变发展实施了监测,分析对比了温度发展规律和应变发展规律。分析结果表明:在早期因混凝土水化热引起温度上升,整个管段结构膨胀受拉,温度到达峰值后逐渐下降,结构也收缩恢复;但由于混凝土自收缩等因素的存在,结构最终收缩受压。研究所提供的试验结果可作为深入进行数值分析的一个基础。     

FSAE赛车前悬架运动学仿真及参数优化

运用Catia软件建立某FSAE赛车前悬架三维模型,并将Catia中的坐标转换成Adams软件中的坐标,建立Adams前悬架模型。针对该FSAE赛车前悬架进行双轮跳动运动学仿真,并对悬架传递比和前轮定位参数进行参数优化。     

散货港区的智慧港口规划

本文结合某港散货港区智慧港口规划项目,介绍了该港南作业区智能化项目的核心在于构建一套适应现代散杂货港口发展趋势、突破传统散货港口作业模式的全新港口智能化系统.本次规划将物联网、大数据技术、AI人工智能、5G等新型基础设施与生产业务融合,创新生产作业流程及资源配置,显著提高港口的作业运营能力、物流协同能力、口岸支持能力、...