Fabrication of a Novel Porous Poly（Vinylidene Fluoride） Blend Five-Bore Membrane for Wastewater Treatment

Porous poly(vinylidene fluoride) (PVDF)/poly(methyl methacrylate) (PMMA) blend five-bore hollow fiber membranes are prepared by wet phase inversion methods. In spinning these PVDF hollow fibers, N, N-dimethylacetamide (DMAc) and polyvinyl pyrrolidone (PVP) are used as the solvent and the non-solvent additive, respectively. The external coagulant uses water. The internal coagulants use water and DMAc-water solutions. The membranes are characterized in terms of water flux and molecular weight cut-off for the wet membranes. The cross-sectional structures are examined by scanning electron microscopy (SEM). The effects of polymer concentration and the internal coagulant on the permeation properties and membrane structures are examined keeping the bore liquid flow and air-gap constants. Relative high flux, rejection and strengh PVDF five-bore hollow fiber membranes could be prepared from the polymer concentration in dope solution at 17% of mass fraction, the air gap distance of 14 cm, and using 10% of mass fraction of DMAc solution as the internal coagulant at 13mL/min of flow.     

Ignition-proof properties of a high-strength Mg-Gd-Ag-Zr alloy

<正>A high-strength Mg-15.3Gd-l.8Ag-0.3Zr(GQ152K,mass fraction) alloy was prepared by conventional ingot metallurgy process.The solution and aging(denoted as T6) treated alloy exhibits remarkable mechanical properties with ultimate tensile strength of 421 MPa and tensile yield strength of 309MPa.It has higher igniting temperature of 1208 K.Moreover,it can stand against flame at 1203 K for over 6 min in vertical burning tests, and its flammabiUty behavior is very similar to that of 6101A1 alloy.Vertical burning tests appear to be able to directly study the flammability behavior of Mg alloys and it appears to be a good approach to study the flammability behavior of Mg alloys in an aircraft fire accident.     

Grafting watermelon seedling production management system based on process control strategy

Greenhouse environmental management, seedling bed scheduling, and fertilizer and water management are the core technologies of seedling nursery. Precision management and control of the whole production process guarantees high grated seedling quality. In order to improve management efficiency of grafted watermelon seedling production and seedling quality, this paper designs and develops a grafted watermelon seedling production management system based on process control methods by process control strategy, seedling bed planning design, and handheld device technology.     

区域物流网络规划研究现状及若干关键问题

合理的区域物流网络是提高物流运作效率、促进区域经济发展的重要条件.提出了区域物流网络规划＂中心扩展＂和＂中心吸附＂的研究思路,以及将数学优化模型与地理信息技术（GIS）有机结合的研究方法.进而指出区域物流网络规划研究中,区域尺度范围确定与划分、企业物流运营网络规划、区域跨界物流整合与优化、区域物流波及效应与摄动效应、区域物流网络动态演化机理及动力机制等,今后特别值得关注的一系列重要问题.     

火山岩熔空洞地区高等级公路建设现状与展望

针对火山岩熔空洞地区公路建设相关研究成果,总结了火山岩熔空洞地区的形成过程及其物理、力学性质和工程特点,分析了火山岩熔空洞地区易产生的路基病害。在此基础之上,对该地区的公路建设进行了展望。     

四味芳香开窍药的挥发性成分对缺血缺氧PC12细胞及细胞内Ca2+的影响

目的研究四味芳香开窍药的挥发性成分对连二亚硫酸钠(Na2S2O4)致PC12细胞缺血缺氧损伤及细胞内Ca2+的影响。方法体外实验采用5mmol/L的Na2S2O4导致PC12细胞缺血缺氧性损伤,然后观测细胞形态;用二甲基噻唑二苯基四唑溴盐(MTT)比色法,考察水蒸汽蒸馏法提取的麝香、苏合香、安息香挥发性成分及冰片对缺血缺氧PC12细胞活性的影响;并按照试剂盒要求测定模型细胞内Ca2+的含量。结果麝香4、8、16μg/mL,冰片8、16μg/mL,苏合香20、40μg/mL及安息香16μg/mL组均能显著升高模型细胞的吸光度(A)值(P<0.05,P<0.01),显著抑制Na2S2O4对PC12细胞的损伤;苏合香40、80μg/mL,安息香4、8、16μg/mL组均能显著降低模型细胞内Ca2+含量(P<0.05,P<0.01);麝香、冰片有降低模型细胞内Ca2+含量的趋势。结论麝香、苏合香、安息香的挥发性成分及冰片均有保护缺血缺氧PC12细胞的作用,其机制可能与降低细胞内Ca2+的含量,防止钙超载有关。     

TSM/TDM策略分类与评价分析

交通系统管理(TSM)和交通需求管理(TDM)是当前城市交通改善的两项主要策略。结合国内外相关研究成果,深入分析了TSM和TDM的概念,对比研究了TSM和TDM的关系、分类方法及其主要特征。在此基础上,提出了多视角下定性和定量分析相结合的TSM/TDM策略评价的基本思路,并通过两个实际案例探讨了策略评价的定性和定量数据分析方法及评价指标体系。     

CRCP制动板锚固强度影响因素分析与结构设计

制动板端部锚固强度的影响因素主要有端部锚固力、制动板长度、混凝土弹性模量、基层弹性模量、路基回弹模量等,用有限元分析软件ANSYS,从这5个方面分析计算了端部制动板锚固系统的位移和最大应力,得出了各影响因素对端部制动板锚固强度的影响规律,提出了适合不同工程条件下制动板类型。     

基于ADAMS重型半挂车动荷载仿真分析

利用ADAMS/Car仿真软件建立了某重型半挂车模型,以綦江—万盛高速公路路面实测平整度数据为基础,用正弦曲线模拟路面,对车辆各轴车轮及不同车速和载重时的动荷载进行了仿真分析,同时对车辆模型在假定不同路面振幅和波长下的动荷载也进行了研究,为分析车辆与路面之间的相互作用提供参考价值。     

SPH法模拟立面二维溃坝流动应用研究

光滑离子流体动力学(SPH)法是一种纯拉格朗日(Lagrange)无网格方法,近年来发展日趋成熟。对SPH法的基本原理、核函数及控制方程离散格式、边界处理方法等进行了介绍。在此基础上建立了数值水槽模型,模拟了立面二维溃坝流动问题,并将所得结果与VOF法及模型试验得到的结果进行比较,结果表明:SPH法能够捕捉到流体的飞溅及融合现象,适于模拟具有瞬时极大变形等物理力学问题。