大跨径斜拉桥塔墩梁固结处空间受力分析

安徽五河淮河桥大桥为混合梁斜拉桥,跨径布置为(246+125)m,为独塔双索面塔墩梁固结体系.利用Midas/Civil建立空间杆系模型进行整体静力分析,确定塔墩梁部位四种最不利荷载工况,得到其活载影响线加载位置和荷载大小.再利用大型通用有限元软件ANSYS建立塔墩梁固结处三维实体模型进行受力分析,为设计与施工提供科学理论依据.     

基于复杂网络理论的客运专线网络可靠性分析

随着客运专线网络的逐渐完善,人们对其可靠性也提出了更高要求。利用复杂网络理论对客运专线网络的可靠性进行分析,有利于发现网络中的关键节点及薄弱环节,从而有针对性地对网络进行完善。基于复杂网络理论,建立客运专线网络模型,并计算该复杂网络模型的静态统计特征,包括度分布、聚类系数和平均路径长度,得出客运专线网络是典型的无标度复杂网络。分别在随机性攻击和选择性攻击两种模式下,从网络的全局效率和最大连通子图的相对大小两个指标,对客运专线网络的可靠性进行分析,得知客运专线网络对随机性攻击的抗破坏能力较强,而对选择性攻击的抗攻击能力较弱,最后提出了提高客运专线网络可靠性的建议。     

Recycling of aluminum from fibre metal laminates

Recycling of aluminum alloy scrap obtained from delaminated fibre metal laminates (FMLs) was studied through high temperature refining in the presence of a salt flux. The aluminum alloy scrap contains approximately mass fraction w(Cu) = 4.4%, w(Mg) = 1.1% and w(Mn) = 0.6% (2024 aluminum alloy). The main objective of this research is to obtain a high metal yield, while maintaining its original alloy compositions. The work focuses on the metal yield and quality of recycled Al alloy under different refining conditions. The NaCl-KCl salt system was selected as the major components of flux in the Al alloy recycling. Two different flux compositions were employed at NaCl to KCl mass ratios of 44:56 and 70:30 respectively, based on either the eutectic composition, or the European preference. Different additives were introduced into the NaCl-KCl system to study the effect of flux component on recycling result. Although burning and oxidation loss of the alloying elements during re-melting and refining take place as the drawbacks of conventional refining process, the problems can be solved to a large extent by using an appropriate salt flux. Experimental results indicate that Mg in the alloy gets lost when adding cryolite in the NaCl-KCl salt system, though the metal yield can reach as high as 98%. However, by adding w(MgF₂) = 5% into the NaCl-KCl salt system (instead of using cryolite) all alloying elements were well controlled to its original composition with a metal yield of almost 98%.     

Effect of Gr Content and Hot Extrusion on Tensile Properties of （Nano-SiCp~-Gr）/Cu Composites Fabricated by Powder Metallurgy

Novel hybrid Cu matrix composites reinforced by graphite (Gr) particle with volume fraction of 5%?C15% and nano-SiC particle (nano-SiCp) with volume fraction of 3% have been prepared by powder metallurgy. The results show that Gr and nano-SiCp distribute uniformly in the Cu matrix. With increasing the volume fraction of Gr, the tensile strength of the composites decreases from 114 to 51MPa and the elastic modulus decreases from 75 to 60GPa. Compared with the sintered composites, the tensile properties including elastic modulus, tensile strength, yield strength and tensile elongation of the hot-extruded (nano-SiCp+Gr)/Cu composites are improved greatly due to higher relative density of the composites and more uniform distribution of Gr and nano-SiCp, in addition to finer grain size of the matrix as a result of dynamic recovery and recrystallization which occur during hot extrusion process.     

Fabrication of a Novel Porous Poly（Vinylidene Fluoride） Blend Five-Bore Membrane for Wastewater Treatment

Porous poly(vinylidene fluoride) (PVDF)/poly(methyl methacrylate) (PMMA) blend five-bore hollow fiber membranes are prepared by wet phase inversion methods. In spinning these PVDF hollow fibers, N, N-dimethylacetamide (DMAc) and polyvinyl pyrrolidone (PVP) are used as the solvent and the non-solvent additive, respectively. The external coagulant uses water. The internal coagulants use water and DMAc-water solutions. The membranes are characterized in terms of water flux and molecular weight cut-off for the wet membranes. The cross-sectional structures are examined by scanning electron microscopy (SEM). The effects of polymer concentration and the internal coagulant on the permeation properties and membrane structures are examined keeping the bore liquid flow and air-gap constants. Relative high flux, rejection and strengh PVDF five-bore hollow fiber membranes could be prepared from the polymer concentration in dope solution at 17% of mass fraction, the air gap distance of 14 cm, and using 10% of mass fraction of DMAc solution as the internal coagulant at 13mL/min of flow.     

Ignition-proof properties of a high-strength Mg-Gd-Ag-Zr alloy

<正>A high-strength Mg-15.3Gd-l.8Ag-0.3Zr(GQ152K,mass fraction) alloy was prepared by conventional ingot metallurgy process.The solution and aging(denoted as T6) treated alloy exhibits remarkable mechanical properties with ultimate tensile strength of 421 MPa and tensile yield strength of 309MPa.It has higher igniting temperature of 1208 K.Moreover,it can stand against flame at 1203 K for over 6 min in vertical burning tests, and its flammabiUty behavior is very similar to that of 6101A1 alloy.Vertical burning tests appear to be able to directly study the flammability behavior of Mg alloys and it appears to be a good approach to study the flammability behavior of Mg alloys in an aircraft fire accident.     

Grafting watermelon seedling production management system based on process control strategy

Greenhouse environmental management, seedling bed scheduling, and fertilizer and water management are the core technologies of seedling nursery. Precision management and control of the whole production process guarantees high grated seedling quality. In order to improve management efficiency of grafted watermelon seedling production and seedling quality, this paper designs and develops a grafted watermelon seedling production management system based on process control methods by process control strategy, seedling bed planning design, and handheld device technology.     

区域物流网络规划研究现状及若干关键问题

合理的区域物流网络是提高物流运作效率、促进区域经济发展的重要条件.提出了区域物流网络规划＂中心扩展＂和＂中心吸附＂的研究思路,以及将数学优化模型与地理信息技术（GIS）有机结合的研究方法.进而指出区域物流网络规划研究中,区域尺度范围确定与划分、企业物流运营网络规划、区域跨界物流整合与优化、区域物流波及效应与摄动效应、区域物流网络动态演化机理及动力机制等,今后特别值得关注的一系列重要问题.     

火山岩熔空洞地区高等级公路建设现状与展望

针对火山岩熔空洞地区公路建设相关研究成果,总结了火山岩熔空洞地区的形成过程及其物理、力学性质和工程特点,分析了火山岩熔空洞地区易产生的路基病害。在此基础之上,对该地区的公路建设进行了展望。     

四味芳香开窍药的挥发性成分对缺血缺氧PC12细胞及细胞内Ca2+的影响

目的研究四味芳香开窍药的挥发性成分对连二亚硫酸钠(Na2S2O4)致PC12细胞缺血缺氧损伤及细胞内Ca2+的影响。方法体外实验采用5mmol/L的Na2S2O4导致PC12细胞缺血缺氧性损伤,然后观测细胞形态;用二甲基噻唑二苯基四唑溴盐(MTT)比色法,考察水蒸汽蒸馏法提取的麝香、苏合香、安息香挥发性成分及冰片对缺血缺氧PC12细胞活性的影响;并按照试剂盒要求测定模型细胞内Ca2+的含量。结果麝香4、8、16μg/mL,冰片8、16μg/mL,苏合香20、40μg/mL及安息香16μg/mL组均能显著升高模型细胞的吸光度(A)值(P<0.05,P<0.01),显著抑制Na2S2O4对PC12细胞的损伤;苏合香40、80μg/mL,安息香4、8、16μg/mL组均能显著降低模型细胞内Ca2+含量(P<0.05,P<0.01);麝香、冰片有降低模型细胞内Ca2+含量的趋势。结论麝香、苏合香、安息香的挥发性成分及冰片均有保护缺血缺氧PC12细胞的作用,其机制可能与降低细胞内Ca2+的含量,防止钙超载有关。