Chaff cloud jamming suppression based on wavelet transform

Radar target signals and chaff cloud jamming signals have different characters by the wavelet transform. The wavelet coefficients of radar target signals are highly correlated with its near-and-near-scale wavelet coefficients, however the correlativity between the wavelet coefficients of chaff cloud jamming signals and its near-and-near scale wavelet coefficients is less significant. Based on the binary-base discrete wavelet transform and the correlation algorithm, the method of target entropy to estimate standard variance of the jamming signals and each scale is proposed to ensure reasonable threshold, to suppress chaff cloud signals and finally to reconstruct mixed signals by the improved spatially selective noise filtration (ISSNF) method. The extensive simulation results show that the proposed method can availably suppress chaff cloud jamming and decontaminate target echo.     

The enforcement of shipping standards under UNCLOS

This article discusses the enforcement of shipping standards, with a particular focus on Part XII of UNCLOS. Section 6 of Part XII contains the only comprehensive set of vessel-related enforcement provisions in the Convention, but the Part’s scope is limited to “the preservation and protection of the marine environment.” Therefore, not all shipping standards fall clearly within Part XII’s ambit, including those centered on safety, security, and crewing considerations. The enforcement provisions of Section 6 are favorable to flag states and their vessels, and Section 7 contains a number of safeguards for their benefit, so it is in the interests of these parties to have coastal state enforcement governed by Part XII. However, the ability of coastal states to establish and enforce shipping standards that apply within the territorial sea extends to more than just environmental matters. The result is that different standards give rise to different enforcement powers, depending on the maritime zone in which a vessel is located, even if those standards arise from the same international agreement. It is suggested that to remedy these problems, UNCLOS would need to be amended in order to provide a comprehensive enforcement regime for the enforcement of shipping standards.     

Color image segmentation by edge linking and region grouping

A novel method toward color image segmentation is proposed based on edge linking and region grouping. Firstly, the edges extracted by the Canny detector are linked to form regions. Each of the end points of edges is connected by a direct line to the nearest pixel on another edge segment within a sub-window. A new distance is defined based on the feature that the edge tends to preserve its original direction. By sampling the lines to the image, the image is over-segmented to labeled regions. Secondly, the labeled regions are grouped both locally and globally. A decision tree is constructed to decide the importance of properties that affect the merging procedure. Finally, the result is refined by user’s selection of regions that compose the desired object. Experiments show that the method can effectively segment the object and is much faster than the state-of-the-art color image segmentation methods.     

Efficient democratic group signatures with threshold traceability

Democratic group signature (DGS) is a group-oriented primitive with great flexibilities, i.e., no group manager, anonymity, and traceability. In a DGS scheme with (t, n)-threshold traceability, any subset of not less than t members can jointly reveal the identity of the signer while preserving security even in the presence of an active adversary can corrupt up to t − 1 group members. This paper proposes an efficient DGS scheme. We use publicly verifiable secret sharing (PVSS) to distribute the trapdoor via which the real signer is revealed. The computation cost and communication overhead of our DGS signatures are greatly reduced, compared with the existing work. For example, the size of the resulting signature contains only 2n + 1 elements of Z _q , except the PVSS output.     

An analysis of the determinants of children’s weekend physical activity participation

This paper examines the out-of-home, weekend, time-use patterns of children aged 5–17 years, with a specific emphasis on their physical activity participation. The impact of several types of factors, including individual and household demographics, neighborhood demographics, built environment characteristics, and activity day variables, on physical activity participation is analyzed using a joint nested multiple discrete–continuous extreme value-binary choice model. The sample for analysis is drawn from the 2000 San Francisco Bay Area Travel Survey. The model developed in the paper can be used to assess the impacts of changing demographics and built environment characteristics on children’s physical activity levels.     

Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

CFD-based method of determining form factor <Emphasis Type="Italic">k</Emphasis> for different ship types and different drafts

The value of form factor k at different drafts is important in predicting full-scale total resistance and speed for different types of ships. In the ITTC community, most organizations predict form factor k using a low-speed model test. However, this method is problematic for ships with bulbous bows and transom. In this article, a Computational Fluid Dynamics (CFD)-based method is introduced to obtain k for different type of ships at different drafts, and a comparison is made between the CFD method and the model test. The results show that the CFD method produces reasonable k values. A grid generating method and turbulence model are briefly discussed in the context of obtaining a consistent k using CFD.     

Model test for dynamic construction mechanical effect of large-span loess tunnel

It has been a focus of debate for a large time on construction methods for large-span loess tunnel. Reasonable construction method has much effect on stability of tunnel and construction schedule. Deformation and failure of surrounding rock are quite complex. Associating with the large-span loess tunnel of Zhengzhou—Xi’an high-speed passenger rail line in China, large scale model test with geometric proportion 1:20 is applied to study on dynamic mechanical behavior of various construction methods. They include full-face excavation with support and no support, and benching method with support. It is found that pre-deformation and stress accumulation take place ahead of working face. The effects of three construction methods are further studied, particularly in terms of tunnel displacement and stress changes. It is revealed that benching method transfers load to an unexcavated area, limits horizontal deformation, reduces stress concentration effectively, lengthens the distance between location of peak for stress concentration and working face, and consequently increases stability. The model test results not only supply theoretical foundation for determination of reasonable construction method, but also can act as reference for similar tunnel and underground engineering construction.     

A hybrid firefly algorithm for optimizing fractional proportional-integral-derivative controller in ship steering

In this paper, a new algorithm which integrates the powerful firefly algorithm(FA) and the ant colony optimization(ACO) has been used in tracking control of ship steering for optimization of fractional-order proportional-integral-derivative(FOPID) controller gains. Particle swarm optimization(PSO) algorithm is also used to optimize FOPID controllers, and their performances are compared. It is found that FA optimized FOPID controller gives better performance than others. Sensitivity analysis has been carried out to see the robustness of optimum FOPID gains obtained at nominal conditions to wide changes in system parameters, and the optimum FOPID gains need not be reset for wide changes in system parameters.     

Effect of orthogonal stiffeners on the stability of axially compressed steel jacking pipe

Load conditions for steel pipe-jacking are complex during the construction stage. The stability of steel jacking pipe has been an increasingly important problem as jacking forces, pipe diameters and jacking distances increase. However, there are no standards for pipe reinforcement, for prevention of buckling, or for remedying pipe that buckles when being jacked axially. Past experience suggests that stiffeners can effectively reinforce the structure. This study analyzes the effect of different stiffeners on the stability of steel jacking pipe under axial compression using finite element analysis. The results suggest that the stability of steel jacking pipe can be significantly improved by using orthogonal stiffeners, in terms of engineering costs and construction space inside the pipe. Based on current engineering practice, the application of orthogonal stiffeners is discussed. This study provides a useful reference for the design and construction of steel jacking pipe.