厚壁球壳的杂交／混合有限元分析

本文对８一节点四边形轴对称杂交／混合元ＡＸＨＭ１６进行了系列考核：（１）考查ＡＸＨＭ１６是否含有零能变形模式，以查明它的含秩状况；（２）通过受内压作用的厚壁球壳考题，观察ＡＸＨＭ１６的转轴不变性和其它性能表现。事实表明：ＡＸＨＭ１６满足单元合理足秩的必要条件和充分条件，不含零能变形模式，单刚合足秩。数值考核表明：ＡＸＨＭ１６具有很好的位移精度和应力精度，对坐标转轴的敏感程度并不明显，且在近乎相同的     

Effect on friction of engine oil seal with engine oil viscosity

Low viscosity engine oil can improve a vehicle’s fuel economy by decreasing the friction between the engine components. Frictional torque varies with the velocity change due to different viscosity characteristics of SAE grade 5W-20, 5W-30 and 5W-40 engine oils. The viscosity for each of these grades was measured to outline the effect low viscosity engine oils have on engine friction, which may lead to improved fuel economy. Engine oil seal frictional torque increases with the shaft rotational speed for all three engine oil grades. A decrease in engine oil seal frictional torque was confirmed when low viscosity engine oil was used. Also, the leak-free performance of the engine oil with the seal satisfied the life limit durability test criteria. Thus, low viscosity engine oil may be used to improve fuel economy by decreasing the frictional loss of the engine oil seal while having no negative impact on performance due to leak-free functioning.     

生物法处理生活污水脱氮除磷效果分析

通过对铁道部无锡干部培训基地（以下简称培训基地）的生活污水的生物法处理效果观察，探析兼氧／好氧生物处理系统的脱氮除磷原理并对影响处理效果因素进行分析。     

Mathematical Modelling of Vibrations and Loading of Railway Tanks Taking into Account the Liquid Cargo Mobility

Dynamics and loading of railway tank cars transporting liquid cargo are investigated. The approach based on the mechanical-pendulum analogy for the liquid cargo mobility simulation is proposed. Hydrodynamic parameters of the mechanical analogy are determined using the solution of the boundary-value problem for the liquid cargo vibrations in a cavity with the tank boiler shape. The fitting of the developed mathematical models is proved by comparison of calculated results and test data. Vibration characteristics and loading of tank-cars under their shunt collisions and motion along straight and curved track in trains are evaluated. It is shown that as a rule the liquid cargo mobility has an essential influence on tank dynamic properties.     

Nutrient cycling and primary production in the marine systems of the Arctic and Antarctic

Primary production events in both the Arctic and the Antarctic are highly localized. Carbon-14 incubations that did not account for this caused antarctic primary production estimates to be revised too far downwards from the historic view of high productivity. The primary production regime in the Arctic is even more heterogeneous than in the Antarctic. Arctic primary production rates are in the process of being revised upwards because of a better spatial and temporal distribution of incubation experiments and a re-awakening of interest in estimating new production from the distribution of chemical variables. Similarly, recent examination of temporal changes in nitrate concentrations and recognition of the importance of ice-edge blooms has caused antarctic primary productivity to be revised upwards. In both the Arctic and the Antarctic, the ratio of “new” to total primary production is high, and neglect of this fact can lead to an underestimation of the potential that these regions have for influencing global cycles of bioactive chemicals. Some recent data on temporal changes in nitrate from Fram Strait emphasize the poor state of our knowledge by suggesting an unexpectedly high “new” production rate of 1 g C m⁻² d⁻¹ for a 35 day experiment that encountered an early Phaeocystis bloom. Chemical distributions suggest that new production over the shelf seas that border the Polar Basin is about 50 g Cm⁻² yr⁻¹.The shelves in the Arctic Ocean's marginal and adjacent seas comprise 25% of the total global continental shelf. These extensive shallow regions have much higher rates of primary production than the Polar Basin and may be globally significant sites of denitrification. Globally significant silica deposition could occur on these shelves or on the adjacent slopes.Because of the differences in geomorphology and stratification, global warming is likely to increase primary production in the Arctic and will probably decrease antarctic primary production.In addition to sharing high ratios of “new” to total primary production, high ammonium concentrations occur in the Arctic and Antarctic. It is possible that these accumulations arise from a strong repression of nitrification at low temperatures.     

Fleet deployment optimization for liner shipping Part 1. Background, problem formulation and solution approaches

The background and the literature in liner fleet scheduling is reviewed and the objectives and assumptions of our approach are explained. We develop a detailed and realistic model for the estimation of the operating costs of liner ships on various routes, and present a linear programming formulation for the liner fleet deployment problem. Independent approaches for fixing both the service frequencies in the different routes and the speeds of the ships, are presented.     

Auto-ignition and micro-explosion behaviors of droplet arrays of water-in-fuel emulsion

The characteristics of auto-ignition and micro-explosion behaviors of one-dimensional arrays of fuel droplets suspended in a chamber with high surrounding temperature were investigated experimentally with various droplet spacings, numbers of droplet and surrounding temperatures. The fuels used were pure n-decane and emulsified n-decane with varied water contents ranging from 10 to 30%. All experiments were performed under atmospheric conditions with high surrounding temperatures. An imaging technique using a high-speed camera was adopted to measure ignition delay, flame lifetime, and flame spread speed. The camera was also used to observe micro-explosion behaviors. As the droplet array spacing increased, the ignition delay also increased, regardless of water content. However, the lifetime of the droplet array decreased as the droplet spacing increased. The micro-explosion starting time remained unchanged regardless of the number of the droplets or the droplet spacing; however, it tended to be delayed slightly as the water percentage and droplet spacing increased.     

Desired yaw rate and steering control method during cornering for a six-wheeled vehicle

This paper proposes a steering control method based on optimal control theory to improve the maneuverability of a six-wheeled vehicle during cornering. The six-wheeled vehicle is believed to have better performance than a four-wheeled vehicle in terms of its capability for crossing obstacles, off-road maneuvering and fail-safe handling when one or two of the tires are punctured. Although many methods to improve the four-wheeled vehicle’s lateral stability have been studied and developed, there have only been a few studies on the six-wheeled vehicle’s lateral stability. Some studies of the six-wheeled vehicle have been reported recently, but they are related to the desired yaw rate of a four-wheeled vehicle to control the six-wheeled vehicle’s maneuvering during corning. In this paper, the sideslip angle and yaw rate are controlled to improve the maneuverability during cornering by independent control of the steering angles of the six wheels. The desired yaw rate that is suitable for a six-wheeled vehicle is proposed as a control target. In addition, a scaled-down vehicle with six drive motors and six steering motors that can be controlled independently is designed. The performance of the proposed control methods is verified using a full model vehicle simulation and scaled-down vehicle experiment.     

Effect of fuel stratification on initial flame development: Part 2-low swirl condition

This paper is the second invstigation on the effect of fuel stratification on flame propagation. In the previous work, the characteristics under the no port-generated swirl condition, i.e., the conventional case was studied. In this work, the flame development under the low swirl condition was considered. For this purpose, the initial flame development and propagation were visualized under different axially stratified states in a modified optical single cylinder SI engine. The images were captured by an intensified CCD camera through the quartz window mounted in the piston. Stratification was controlled by the combination of the port swirl ratio and injection timing. These were averaged and processed to characterize the flame propagation. The flame stability was estimated by the weighted average of flame area and luminosity. The stability was also evaluated through the standard deviation of flame area and propagation distance and through the mean absolute deviation of the propagating direction. The results show that the flame-flow interaction determines the direction of flame propagation and that the governing roles of the two factors vary according to the stratified state and the location in the cylinder. In addition, the flame development and the initial flame stability are strongly dependent on the stratified conditions, and the initial flame stability is closely related to the engine stability and lean misfire limit. Lastly, there is no essential difference in gasoline and CNG flame propagation characteristics.     

Improvement of external transport cost evaluation in the context of Lithuania’s integration into the European Union

This paper starts by reviewing the main components of social marginal costs and environmental costs in the context of transport, and it draws on the experience in Europe concerning the means by which these costs can be valued. That experience is then translated to the situation in Lithuania, where many of the same issues are now being debated. A multicriteria method is proposed to internalize these costs, both from the perspective of the state and of the carriers. Costs need to be raised substantially if the social and environmental factors are to be paid for by the transport users, and such action would bring Lithuania closer to the best practice currently in operation in the European Union.