Heat exchanger/catalytic system for reducing the exhaust emissions from diesel engines

A system has been researched over the past 3 years for reducing the exhaust pollutants from diesel engines for light commercial vehicles. The system researched achieves Euro 6 standards for reduction of polluting gases (CO, HC, PM, NO). It consists of 4 main sections: 1. A heater and heat exchanger (HE); 2. A CO/HC oxidising catalyst (D°C); 3. Pt catalyst on a diesel particulate filter (DPF); 4. A NO reducing reaction (SCR) within the DPF. The system operates as follows. The exhaust gas contains oxidising gases, namely both O₂ and NO₂. The levels of CO and HC are oxidised by O₂ to CO₂ for temperatures above 200°C. Carbon (PM) is oxidised to CO₂ by NO₂ but requires a temperature above 250°C. The operating exhaust temperature of 300°C is ideal for the removal of NO by using the Pt catalyst and the CO generated within the DPF. The heater is required to be able to raise the exhaust temperature at any time to 300°C in order to optimise the performance of the system, since diesel engine exhaust temperatures vary between 160°C (slow speeds) to 350°C (high speeds). Considerable heat is required (??3 kW) to maintain the exhaust gas for a 2l engine at 300°C for engine idle conditions. Therefore a heat exchanger is required to re-circulate the input heat and thereby reduce the maximum power consumption to a maximum of 500W over the engine full operating test cycle. This energy is supplied by the engine battery and alternator. Experimental results have been obtained for the exhaust from a Kubota diesel engine and the reductions in exhaust emissions of 83% (CO/ HC), 58% (NOx) and 99% (PM) were obtained. The PM was continuously cleaned so that there was no build up of back pressure.     

Development of an electric booster system using sliding mode control for improved braking performance

Brake systems of the future, including BBW (Brake-by-Wire), are in development in various forms. In one of the proposed hydraulic BBW systems, an electric booster system replaces the pneumatic brake booster with an electric motor and a rotational-to-linear motion mechanism. This system is able to provide improved braking performance by the design of controllers with precise target pressure tracking and control robustness for better system reliability. First, a sliding mode controller is designed using the Lyapunov function approach to secure the robustness of the system against both the model uncertainty and the disturbance caused by the master cylinder and mechanical components. Next, a simulation tool is constructed to validate the electric booster system with the proposed controller. Finally, the electric booster system is implemented into an actual brake ECU and installed in a vehicle for testing under various braking conditions. The experimental results demonstrate that the proposed controller produces faster pressure build-up performance than the conventional brake system, and its tracking performance is sufficient to ensure comfortable braking.     

Critical success conditions of collaborative methods: a comparative evaluation of transport planning projects

This paper explores critical success conditions of collaborative planning projects in the area of urban transport, evaluating the impact of new collaborative methods, instruments and processes on project performance. Hypothesis building is based on a comparative, empirical research design, rather than on deductive theory construction. Potential critical success conditions are derived from literature. Based on five urban transport planning projects in Gothenburg (Sweden), London (United Kingdom), Milwaukee (United States), Tokyo (Japan) and Mexico City (Mexico), a rough set analysis of the five cases reveals validated success conditions, which can be used for formulating hypotheses for further research or for policy and process improvement. The results suggest that a dedicated management of the multi-actor network, a high diversity of actors, as well as an extensive use of knowledge integration methods in combination with a high network density are critical success conditions of these planning processes. Surprisingly, the extensive use of unilateral methods also showed to be an important success condition. The traditional role of the planner will have to be complemented with the expertise of network and methodology management. The authors conclude that rough set analysis can be a valuable addition to narrative, single-case analysis of collaborative urban transport planning processes.     

荷兰铁路最新研究成果

荷兰铁路最新研究集中在开发用户友好工具以利用标准的列车检测数据对车站晚点列车进行实验分析、建立不同线路列车到发晚点时间分布的随机模型。根据位于荷兰车站Hague HS的轨道电路对近10000次列车运行自动检测可以证明，TNV－Prepare软件工具可以很好地记录列车占用和释放时间以及列车速度。若一条线路上晚点时间很短（1分钟以下）或晚点时间长（5分钟以上）的次数不是太大，发车晚点分布在很多情况下符合一种指数分布。用一种新的工具对大铁路网的时刻表以及在中转车站的相互连接的线路之间的晚点的扩散进行了分析，将列车描述成一个基于Max-Plus线性系统的间断事件系统（DES）。它有助于确定网络中的关键环路，交叉线路时刻表的剩余间隙以及网络中的晚点扩散。另一个铁路研究领域是线路基础设施养护维修与更新改造的寿命周期成本估算的决策支持系统，该系统经证明对不同线路上部结构设计的寿命周期成本的估算非常有效，对轨道和道岔养护维修与更新改造计划规则的修改也十分有效。     

An adaptive model for highway travel time prediction

Traffic congestion caused by either insufficient road capacity or unexpected events has been a major problem in urban transportation networks. To disseminate accurate traveler information and reduce congestion impact, it is desirable to develop an adaptive model to predict travel time. The proposed model is practically implementable to capture dynamic traffic patterns under various conditions, which integrates the features of exponential smoothing and the Kalman filter by utilizing both real‐time and historic data. The model is simple in formulation while robust in performance in terms of accuracy and stability. With a constraint or nonconstraint smoothing factor, the proposed model is tested with both real world and simulated data and demonstrated itself a sound model that outperforms others (e.g., Kalman filter and simple exponential smoothing) specifically under recurring and nonrecurring congestion. Copyright © 2012 John Wiley & Sons, Ltd.     

用于海船精确驾驶的控制率动力修正研究(英文)

The objective of this work is the analytical synthesis problem for marine vehicles autopilots design.Despite numerous known methods for a solution,the mentioned problem is very complicated due to the presence of an extensive population of certain dynamical conditions,requirements and restrictions,which must be satisfied by the appropriate choice of a steering control law.The aim of this paper is to simplify the procedure of the synthesis,providing accurate steering with desirable dynamics of the control system.The approach proposed here is based on the usage of a special unified multipurpose control law structure that allows decoupling a synthesis into simpler particular optimization problems.In particular,this structure includes a dynamical corrector to support the desirable features for the vehicle’s motion under the action of sea wave disturbances.As a result,a specialized new method for the corrector design is proposed to provide an accurate steering or a trade-off between accurate steering and economical steering of the ship.This method guaranties a certain flexibility of the control law with respect to an actual environment of the sailing;its corresponding turning can be realized in real time onboard.     

The Development of a Visualization Methodology for Integrated Coastal Management

Coastal management information is frequently communicated to stakeholders and the public through complicated management documents and engineering plans. With the recognition that public involvement in coastal decision-making processes should be widened have come calls to develop new techniques to communicate complicated coastal information. Using Virtual Reality Geographical Information Systems and visualization packages, such information may be presented using formats more suitable for public consultation and information dissemination exercises than those currently employed. Using a site on the north Norfolk coast of England, an integrated Geographical Information Systems based methodology is presented that allows the visualization of proposed coastal management interventions. Visualizations have been produced that can be published in traditional paper-based management documents, or electronically. The different visualizations are compared and the technical issues surrounding their use discussed. It is argued that the methodology has clear advantages over traditional communication methods, although further research is necessary to determine how it may be practically employed by coastal managers.     

On structural design of energy efficient small high-speed craft

This paper presents an integrated design procedure for determination of structural arrangement and scantlings for the complete structure of small high-speed craft. The purpose of the procedure is to serve as a tool in the preliminary design stage where it enables generation of weight minimized designs with very limited effort. The design procedure is applied in a material concept study for a high-speed patrol craft. The various concepts include single skin and sandwich composites, aluminum and steel. It is demonstrated that the mass of the aluminum hull structure can be reduced from the original 11.7 tonnes to 9.6 tonnes through application of the presented design procedure. The most weight efficient material concept is a carbon-fiber foam-cored sandwich with a structural mass of 4.8 tonnes, which is about 50% less than the refined aluminum version. Through simple hydromechanic analysis, potential for fuel and CO2 emission reductions of 8% for the refined aluminum version and 27% for the carbon-fiber sandwich version in relation to the original craft are indicated.     

Finite-element analysis of quasistatic fracture in CV joints under full-turn and full-throttle conditions

Quasistatic fractures at high joint angles constitute a chronic quality problem in CV joints. This type of fracture occurs when a driver unintentionally depresses the brake and accelerator simultaneously under a full-turn retreat condition. In general, the cage in a ball joint can be broken only at these high joint angles. Here we present a flexible quasistatic simulation model developed to simulate fracture in a CV joint. The cause and process of the quasistatic fracture were analyzed using simulations and physical tests. Static fracture simulations and tests at high joint angles showed that, initially, only one of the six cage posts was damaged. In a simulation of one revolution at constant torque, we found that an imbalance in ball loads generated an excessive cage load. Moreover, if this high cage load was applied when the cage protruded outward, the cage post was subjected to severe shear loading. The cage post was damaged in this specific rotational range. Quasistatic fracture simulations and tests at high joint angles showed that all six cage posts were damaged sequentially. Because entire cage posts were damaged, the quasistatic fracture torque was approximately half of the static torque. The plastic strain in each cage post displayed one step-like jump per revolution in the quasistatic simulations. The ball indentation created by a high ball load was interrupted by the cage-window edges as the ball joint rotated. This hindrance by ball indentation triggered the final breakage of the cage, although it was not the major cause of cage fractures.