In digital ship-design processes, surface modeling needs to be as accurate as possible for effectiveness in ship production
as well as numerical analysis of the performance. Traditionally, the form of a ship hull is constructed from a set of cross-sectional
data. This approach entails difficulties in the cross-sectional spacing and accuracy of the characteristic curves, such as
the stern and bow profiles, deck side line, bottom tangential line, and unconnected curves. Genetic algorithms (GAs) have
attracted increasing attention as a multimodal optimization solution for surface reconstruction that enable construction of
a single non-uniform B-spline (NUB) surface at the initial stage of ship design with constraints such as knuckles, discontinuity
conditions, and bulbous bows with high curvatures, . The first, simultaneous multi-fitting GA determines the boundary curves,
such as the stem and stern profiles, and finds the common knot values for both curves. Similarly, the same GA technique is
applied for other boundary curves at the bottom and the deck. The second GA is employed to fit the interior data points after
the boundary curves are fitted. The encoded design variables for surface construction are the locations of the vertices and
the knot values. Those variables are modified for improving the surface quality until a predefined degree of precision is
attained. In four instances of application, the GA technique developed in this research has been shown to provide good, single,
NUB surfaces with high efficiency. In the early design stage, a single NUB surface is more convenient for performance visualization
and finite-element methods. It can be readily translated into many CAD/CAM packages, which facilitate the smooth transition
of data across the different design stages. 相似文献
Ever since vehicle noise, vibration, and harshness (NVH) reduction technology made dramatic improvements, vehicle interior noises represented by Squeak and Rattle (S/R) becomes an ever more important factor to improve the emotional quality of vehicles. Generally, people detect S/R noises on automotive interior parts, brake system, suspension, Body in White (BIW), etc. Among them, the rear-glass joint is a major source for vehicle interior noise, and can cause S/R noises under a variety of environmental and driving conditions. This study uses, two approaches, experimental and numerical approaches, to define the cause of S/R noise at the rear-glass section. Based on these two approaches, this study confirms that S/R noises generate through the contact between bottom side of molding and BIW. The sealant penetration length, panelmolding distance, and sealant width are the parameters affecting noise generation. In addition, this study created an optimal design with Design of Experiments (DOE) of the rear-glass joint. The design maximized the sealant penetration length, which is a parameter that majorly affects noise. The optimal design comprises of two steps: sealant injections shape optimization and rear-glass joint parameter optimization. Each step is carried out with FEA and validated by sealant penetration experiments. Through these optimizations, this study obtained an optimum combination of design parameters and fignificantly reduced the noise generated by rear-glass section. 相似文献
Roadway usage, particularly by large vehicles, is one of the fundamental factors determining the lifespan of highway infrastructure. Operating agencies typically employ expensive classification stations to monitor large vehicle usage. Meanwhile, single-loop detectors are the most common vehicle detector and many new, out-of-pavement detectors seek to replace loop detectors by emulating the operation of single-loop detectors. In either case, collecting reliable length data from these detectors has been considered impossible due to the noisy speed estimates provided by conventional data aggregation at single-loop detectors. This research refines non-conventional techniques for estimating speed at single-loop detectors, yielding estimates that approach the accuracy of a dual-loop detector’s measurements. Employing these speed estimation advances, this research brings length based vehicle classification to single-loop detectors (and by extension, many of the emerging out-of-pavement detectors). The classification methodology is evaluated against concurrent measurements from video and dual-loop detectors. To capture higher truck volumes than empirically observed, a process of generating synthetic detector actuations is developed. By extending vehicle classification to single-loop detectors, this work leverages the existing investment deployed in single-loop detector count stations and real-time traffic management stations. The work also offers a viable treatment in the event that one of the loops in a dual-loop detector classification station fails and thus, also promises to improve the reliability of existing classification stations. 相似文献
This paper presents the numerical analysis of rudder cavitation in propeller slipstream and the development of a new rudder
system aimed for lift augmentation and cavitation suppression. The new rudder system is equipped with cam devices which effectively
close the gap between the horn/pintle and movable wing parts. A computational fluid dynamics code that solves the Reynolds-averaged
Navier–Stokes equations is used to analyze the flow field of various rudder systems in propeller slipstream. The body force
momentum source terms that mimic flow field behind a rotating propeller are added in the momentum equations to represent the
influence of the propeller and its slipstream. For detailed explication of the new rudder system’s lift augmentation and cavitation
suppression mechanism, three-dimensional flow analysis is carried out. Simulations clearly display the mechanism of the lift
augmentation and cavitation suppression. The computational results suggest that the Reynolds-averaged Navier–Stokes-based
computational fluid dynamics reproduces the flow field around a rudder in propeller slipstream and that the present concept
for a cavitation suppressing rudder system is highly feasible and warrant further study for inclusion of the interaction with
hull and mechanical design for manufacturing and operations. 相似文献
This paper deals with the speed response characteristic of the concentrated flux synchronous motor (CFSM) using ferrite magnets for the electric power steering (EPS) system. To analyze the response characteristic of the CFSM, an analytical method using the electromechanical undamped natural frequency and damping ratio based on the transfer function is proposed. By using the method, the speed response according to the variations of the shape of the permanent magnets (PMs) and rotor core is analyzed. It was analyzed under the conditions of the constant volume of the PMs as well as the constant diameter of the rotor. By using the proposed analysis method, the improved model is desgined based on the initial model fulfilling the required specifications. Finally, the torque and speed response characteristics of two motors are simulated through the finite element analysis (FEA) and MATLAB Simulink. 相似文献
The squeal noise occurring from the disc brakes of passenger cars has been analyzed by using the complex eigenvalue method numerically. The contact between a disc and two pads was analytically modeled as many linear springs and dampers in an effort to develop the improved equation of motion derived on the basis of Lagrange’s equation and the assumed mode method. The finite element modal analysis results for disc brake components constitute an eigenvalue matrix in the analytical equation of motion. The complex eigenvalue analyses based on the equations of motion are able to examine the dynamic instability of a brake system, which is an onset of squeal, by considering the disc rotational effect. Numerical analyses showed that the modes unstable in an undamped analysis became stable in a damped case, which illustrates the important effect of damping on the squeal instability in a brake squeal simulation. Then several modified brake models were suggested and investigated how effectively they suppressed the occurrence of squeal noise. The brake parts such as a pad chamfer and a disc vane were modified and the influence of pad chamfer and vane shapes on squeal occurrence was proved to be significant. The numerical results showed that proper structural modification of a disc brake system can suppress the brake squeal to some extent. 相似文献
A variety of automatic data collection technologies have been used to gather road and highway system data. The majority of these automatic data collection technologies are designed to collect vehicle-based data and either do not have the capability to collect other travel mode data (e.g., bicycles and pedestrians), or may need to be deployed differently to support this capability.
One type of wireless-based data collection system that has been deployed recently is based on Bluetooth technology. A key feature of Bluetooth-based data collection systems that makes travel mode identification feasible is that the Bluetooth-enabled devices within vehicles are also present on bicyclists and pedestrians. This research explores the effectiveness of applying cluster analysis methods when processing data collected via Bluetooth technology from vehicles, bicyclists, and pedestrians to automatically identify the associated travel modes. The results of several experiments utilizing multiple Bluetooth-based data collection units arranged linearly and in relatively close proximity on a simulated intersection demonstrate the potential of cluster analysis to accurately differentiate transportation modes from the collected data. 相似文献
The Autonomous Emergency Braking (AEB) systems have been actively studied for the safety enhancement and commercialized for the past few years. Because the driver tends to overly rely upon active safety systems, AEB needs to be designed to reflect the real road situations such as various road slope and friction coefficient. In this study, an AEB control algorithm is proposed to compensate for the effects of the slope and the friction of road. Based on the maximum possible deceleration for the real road conditions, the minimum braking distance is described with margin parameters for AEB activation control. The deceleration controller with a feedforward term is designed to avoid the collision during AEB operation on real road conditions. The proposed algorithm is validated in simulations first and the experimental verification is performed in the various slope conditions. 相似文献
An advanced driver assistance system (ADAS) uses radar, visual information, and laser sensors to calculate variables representing driving conditions, such as time-to-collision (TTC) and time headway (THW), and to determine collision risk using empirically set thresholds. However, the empirically set threshold can generate differences in performance that are detected by the driver. It is appropriate to quickly relay collision risk to drivers whose response speed to dangerous situations is relatively slow and who drive defensively. However, for drivers whose response speed is relatively fast and who drive actively, it may be better not to provide a warning if they are aware of the collision risk in advance, because giving collision warnings too frequently can lower the reliability of the warnings and cause dissatisfaction in the driver, or promote disregard. To solve this problem, this study proposes a collision warning system (CWS) based on an individual driver’s driving behavior. In particular, a driver behavior model was created using an artificial neural network learning algorithm so that the collision risk could be determined according to the driving characteristics of the driver. Finally, the driver behavior model was learned using actual vehicle driving data and the applicability of the proposed CWS was verified through simulation. 相似文献