Parameter identification for a LuGre model based on steady-state tire conditions

The purpose of this study was to effectively identify parameters for a LuGre friction model based on experimental measures. In earlier work related to this study (Yang et al., 2009), which was based on the characters of polygonal wear (Sueoka and Ryu, 1997), we showed a frictional vibration model for a mass on a moving belt. This model reflected lateral vibrations caused by velocity and toe-in angle. An important aspect of the present study is the improved friction model. A previous friction model, which divided the process into four parts, expressed the sable excited vibration well but failed to reflect the hysteresis loop change when vehicles accelerated or decelerated continuously. A LuGre friction model can solve this problem, but several model parameters must be obtained experimentally. We measured contact width and length of tires as vertical pressure changed; this provided a theoretical basis for apparent stiffness of a unit of tire tread. Based on tire data from Bakker E’s article in a SAE paper from 1987, we identified the Stribeck exponent and Stribeck velocity in LuGre. Then, the results were implemented in a vibration system that verified the rationality of the data.     

Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

GPS-based optimization of plug-in hybrid electric vehicles’ power demands in a cold weather city

Using the WPG03 duty cycle developed from global positioning data collected in Winnipeg, Canada, real world energy demands and costs are modeled. Three types of plug-in hybrid electric vehicles, four temperatures and two charging scenarios are compared to a vehicle with an internal combustion engine. Cold temperatures are shown to greatly affect vehicle operation energy costs, which is an important consideration for cold weather cities such as Winnipeg. The largest energy cost savings are obtained for smaller-battery plug-in hybrids that had the opportunity to charge during the day.     

交通拥堵反思

通过对交通拥堵进行反思,认为交通拥堵是充满活力的成功城市的伴生品,应从不同角度考虑拥堵问题.提出了十项有别于传统观点的提议,主要包括:机动性至关重要,交通拥堵是社会、经济活力的象征;道路扩容效果短暂,并会诱发潜在需求,但仍可带来一定的社会、经济效益;土地使用对出行行为的改变需要长期的努力;紧凑型发展会加剧交通拥堵;降低...     

船闸水工建筑物的检测与评估技术

采用现代测试技术及分析方法对船闸水工建筑物进行定期的检测评估可有效延长建筑物的使用寿命。提出了船闸水工建筑物检测与评估工作的一般流程,包括船闸现状的调查、检测方案的制定、现场检测的实施、检测报告的形成、评估单位的划分、复核验算的考虑因素、评估内容及方法及评估报告的形成,并就相关的检测与评估关键技术进行了阐述。     

Mesoscale subduction at the Almeria–Oran front: Part 1: Ageostrophic flow

This paper presents a detailed diagnostic analysis of hydrographic and current meter data from three, rapidly repeated, fine-scale surveys of the Almeria–Oran front. Instability of the frontal boundary, between surface waters of Atlantic and Mediterranean origin, is shown to provide a mechanism for significant heat transfer from the surface layers to the deep ocean in winter. The data were collected during the second observational phase of the EU funded OMEGA project on RRS Discovery cruise 224 during December 1996. High resolution hydrographic measurements using the towed undulating CTD vehicle, SeaSoar, traced the subduction of Mediterranean Surface Water across the Almeria–Oran front. This subduction is shown to result from a significant baroclinic component to the instability of the frontal jet. The Q-vector formulation of the omega equation is combined with a scale analysis to quantitatively diagnose vertical transport resulting from mesoscale ageostrophic circulation. The analyses are presented and discussed in the presence of satellite and airborne remotely sensed data; which provide the basis for a thorough and novel approach to the determination of observational error.     

Intelligent transport systems solutions in transitional countries: The case of Korea

Transport policy in Korea is driven by the need to cope with ever-worsening traffic conditions. The development of an intelligent transport systems (ITS) Master Plan for Korea is of particular interest and demonstrates the heavy reliance placed on ITS measures to facilitate both the management of congested (but expanding) highway networks and to encourage a shift to greater use of public transport. The paper highlights the major achievements of ITS in Korea by assessing the evidence provided by the widespread implementation of ITS technologies (such as the creation of 'showcase' demonstrations). Some observations from the implementation of ITS in (so-called) transitional economies are presented.     

The problems of hydrocarbon extraction

The problems associated with hydrocarbon extraction in the EEZ are discussed under the headings of resources and environment, technology and the industrial structure, government management, decision-making, and policy formulation. Policy areas identified include boundary delimitation relative to resources, environment and technology, co-ordination and decision-making machinery, relationships with UK and EEC energy policies, and regional planning of the sea and coastal areas used by the off-shore industry.     

Incorporating sustainability assessment in transportation planning: an urban transportation vehicle-based approach

Environmental assessments are on the critical path for the development of land, infrastructure and transportation systems. These assessments are based on planning methods which, in turn, are subject to continuous enhancement. The substantial impacts of transportation on environment, society and economy strongly urge the incorporation of sustainability into transportation planning. Two major developments that enhance transportation sustainability are new fuels and vehicle power systems. Traditional planning ignores technology including the large differences among conventional, hybrid and alternative fuel vehicles and buses. The introduction of alternative fuel vehicles is likely to change the traditional transportation planning process because different characteristics need to be taken into account. In this study a sustainability framework is developed that enables assessment of transportation vehicle characteristics. Identified indicators are grouped in five sustainability dimensions (Environment, Technology, Energy, Economy and Users). Our methodology joins life cycle impacts and a set of quantified indicators to assess the sustainability performance of seven popular light-duty vehicles and two types of transit buses. Bus Rapid Transit receives the highest sustainability index and the pickup truck the lowest. Hybrid electric vehicles are found to have the highest sustainability index among all other passenger vehicles. A sensitivity analysis shows the proposed sustainability dimensions produce robust sustainability assessment for several weighting scenarios. The results are both technology and policy sensitive, thus useful for both short- and long-term planning.