我在，故我赢红牛车手维特尔

“如果2009年的开局并不是我们现在所看到的,我认为我们已经驾驶着RB5赢得了世界冠军,因为我们有F1里最的底盘”。克里斯蒂安·霍纳如是说。     

Crash protection of Hybrid Electrical Vehicles for amending the KMVSS No. 91

This paper explores issues related to the electrical safety of Hybrid Electrical Vehicles (HEVs) during and after various crash events. Japanese and American federal regulations regarding occupant protection against high voltages in Electric Vehicles (EVs) and HEVs were surveyed and analyzed in this study. Front, side and rear impact tests for two types of HEVs were conducted to investigate electrolyte spillage, the retention of the propulsion battery system and the electrical isolation of the occupant. The test results met the related criteria. The test procedures and the criteria for occupant protection established through this study were amended to Korean Motor Vehicle Safety Standard (KMVSS) No. 91 to add the crash protection of the EVs and the HEVs.     

Development of electrostatic diesel particulate matter filtration systems combined with a metallic Flow-Through Filter and electrostatic methods

A 3000 cc diesel engine attached to an engine dynamo was used to test three newly developed electrostatic Diesel Particulate matter filtration Systems (DPS 1, 2, and 3) under four steady-state engine operating conditions: idle, 2000 rpm with no load, and 2000 rpm under 25% and 50% loads. Of the two developed alternatives, DPS 1 and DPS 2, DPS 2 comprises an ionization section, electrostatic field additional section and Flow-Through Filter (FTF), which achieved almost 90% removal of particulate matter (PM) under the engine’s operating conditions, and the efficiency of the FTF was maintained between 20% and 50%. Comparing the long-term performance of DPS 2 and DPS 3 (effectively a serial combination of two DPS 2s) with a commercially-available Diesel Particulate Filter (DPF), the DPS 2 and DPS 3 achieved almost the same efficiency for removing PM as the DPF but had significantly improved (75%∼90% lower) differential pressure drops.     

Parameter matchin and optimization for a hydraulic power-assistant system

A hydraulic power-assist system is a hydraulic regeneration system that can significantly improve fuel economy when installed on a conventional bus operating in urban traffic. This paper presents a methodology for matching a new hydraulic power-assist system (HPA) to a conventional bus. The HPA and the conventional bus were modeled using the AMESim environment. The HPA was optimized using a simulation-based orthogonal design method with two indexes, the fuel economy and the acceleration performance. According to the simulation results, the volume of the accumulator was the primary factor affecting fuel economy, and the gear ratio of the transfer case was the primary factor influencing the acceleration performance. As a result, tradeoffs between the two indexes are required for a practical operational scenario. Experimental results demonstrated that the optimal HPA installed on a conventional bus was able to satisfy the acceleration performance requirement of the vehicle and also reduced fuel consumption by 25 percent.     

Design of power split transmission: Design of dual mode power split transmission

The power split type hybrid system transmits engine power by dividing it into the electrical unit and the mechanical unit. Its power transmission efficiency is highest at the mechanical point (MP), where the full power is transmitted to the mechanical unit. In this study, the equation for the MP was derived for the gear ratios of a general 4-node lever model. The MP characteristics for the transmission ratio (TR) of the input split and compound split structures were examined using the equation derived. Using the examined input split and compound split structures, a systematic design method for the dual mode power split transmission was proposed. In the dual mode power split transmission, the MP could be positioned at the desired TR, and the input split and compound split modes could be selectively used according to the clutch combination, which leads to the operation of the vehicle within a high system efficiency range.     

Robust lane markings detection and road geometry computation

Detection of lane markings based on a camera sensor can be a low-cost solution to lane departure and curve-over-speed warnings. A number of methods and implementations have been reported in the literature. However, reliable detection is still an issue because of cast shadows, worn and occluded markings, variable ambient lighting conditions, for example. We focus on increasing detection reliability in two ways. First, we employed an image feature other than the commonly used edges: ridges, which we claim addresses this problem better. Second, we adapted RANSAC, a generic robust estimation method, to fit a parametric model of a pair of lane lines to the image features, based on both ridgeness and ridge orientation. In addition, the model was fitted for the left and right lane lines simultaneously to enforce a consistent result. Four measures of interest for driver assistance applications were directly computed from the fitted parametric model at each frame: lane width, lane curvature, and vehicle yaw angle and lateral offset with regard the lane medial axis. We qualitatively assessed our method in video sequences captured on several road types and under very different lighting conditions. We also quantitatively assessed it on synthetic but realistic video sequences for which road geometry and vehicle trajectory ground truth are known.     

Robust optimization design method for powertrain mounting systems based on six sigma quality control criteria

This paper presents a robust optimization design method based on Six Sigma quality control criteria to improve the design of a powertrain mounting system (PMS). The powertrain is modeled as a rigid body having six degrees of freedom (DOF) connected to a rigid base by four rubber mounts, and each mount is simplified as a three-dimensional spring-damper element in its local coordinate system (LCS). The calculation method based on energy decoupling is used to estimate the decoupling ratios of a PMS. The location and static stiffness of each mount and the orientations of the two anti-torsion mounts are selected as uncertain design variables, and the nominal values of these design variables are optimized to obtain a robust Six Sigma design for a PMS. The uncertain design variables are characterized by a perturbation or percent variation around their nominal values. The generalized reduced gradient (LSGRG2) optimization method is employed to solve the robust optimization problem, and a second-order Taylor series expansion is used to estimate the statistical properties of the performance constraints and objectives. The optimization results show that the robust design ensures good robustness or high reliability for the natural frequencies, decoupling ratios, and frequency separation constraints of a PMS.     

Simple estimation of high-frequency radiation from a muffler shell

The acoustic design of exhaust mufflers has mainly focused on reducing the discharge noise from the tailpipe. However, the noise that is transmitted through the muffler jacket and the endplate becomes important since the muffler reduces the amount of discharge noise when it has an optimized design. It is known that the contribution to the overall exhaust noise of the muffler shell is significant in the mid- and high-frequency ranges. The current problem is that there are no appropriate computational tools at high frequencies. A simple method to analyze the 1/3-octave band of sound radiating from an arbitrary shape (like a muffler) was employed to predict the band spectrum of the radiated noise. The calculation method included formulating the boundary integral, which was modified into a quadratic form in order to enable the prediction of the intensity levels in a band analysis. Monopole and dipole source terms in the conventional BEM were transformed into the auto- and cross-spectra of the two vibrating sources, in which the cross-spectra could be eventually omitted by assuming that the correlation coefficients were negligible. The method was adopted in an abrupt calculation of the shell noise in 1/3-octave band levels without nonuniqueness problem. In comparison with the measured data, the simulation result showed roughly 3-dB errors at most of the field points, excluding several special points that were normal to the shell and exhibited a maximum 5-dB error.     

微注射成形实验与数值模拟

为研究注射料的流动性和模腔形状的复制能力,加工了含有微流道的模具,在微注射系统上进行了微注射实验.应用基于矢量化显式算法的程序,在不同壁面边界条件下,对微注射实验进行了模拟.结果表明:在注射料温度220 ℃、模具温度40 ℃、注射流量为20 mm3/s、注射时间1 s、保压时间10 s的注射工艺条件下,聚丙烯能较好的复制长5 mm,宽1.5 mm和厚0.8 mm的微流道形状.采用滑移边界条件的微注射模拟结果与实验结果一致,说明微注射中存在边界滑移速度.     

卵砾石层管推进工程超挖及卡钻对管材与土壤互制行为的影响研究

非明挖工法在都市施作时,常因困难地质(如卵砾石层)或障碍物而造成施工困难、工期延误或发生灾损。本文主要针对非明挖施工法里的管推进施工法(Pipe-jacking Method),探讨管推进工法施工时可能遭遇的困难,以及施工困难状况下之管材土体互制行为。探讨的施工困难包括超挖、挤压、卡钻等问题。本研究针对超挖范围、卡钻位置、阻力大小以及推进力施加位置等,以ABAQUS有限元素软件进行三维数值仿真,探讨直线推进施工中的问题。