An overview of biodiesel in Asian countries and the harmonization of quality standards

Recently, biofuels have been actively introduced as transportation fuels in Asian countries. Common drivers to use biofuels are energy security, fuel diversification, and the reduction of greenhouse gases. In addition, some Southeastern Asian countries look forward to utilizing the abundant agricultural resources and providing stability for farmers. However, a compromised quality of biofuels could cause vehicle trouble, which is why the quality standard of the fuels is very important. On the other hand, the quality standard of biofuels differs from country to country and could cause vehicle trouble in some countries and not others. These differing standards may become an obstacle to trade. In this situation, the harmonization of the biodiesel standards in the East Asia Summit (EAS) region has been initiated by the ERIA biodiesel working group, in which members are the specialists from each country. This review summarizes the introduction of biofuels in this region and the recent activities regarding the harmonization of the fuel quality standard. Important background for this review is based on the results of the ERIA biodiesel working group meeting.     

Actively translating a rear diffuser device for the aerodynamic drag reduction of a passenger car

This research aims to develop an actively translating rear diffuser device to reduce the aerodynamic drag experienced by passenger cars. One of the features of the device is that it is ordinarily hidden under the rear bumper but slips out backward only under high-speed driving conditions. In this study, a movable arc-shaped semi-diffuser device, round in form, is designed to maintain the streamlined automobile??s rear underbody configuration. The device is installed in the rear bumper section of a passenger car. Seven types of rear diffuser devices whose positions and protrusive lengths and widths are different (with the basic shape being identical) were installed, and Computational Fluid Dynamics (CFD) analyses were performed under moving ground and rotating wheel conditions. The main purpose of this study is to explain the aerodynamic drag reduction mechanism of a passenger car cruising at high speed via an actively translating rear diffuser device. The base pressure of the passenger car is increased by deploying the rear diffuser device, which then prevents the low-pressure air coming through the underbody from directly soaring up to the rear surface of the trunk. At the same time, the device generates a diffusing process that lowers the velocity but raises the pressure of the underbody flow, bringing about aerodynamic drag reduction. Finally, the automobile??s aerodynamic drag is reduced by an average of more than 4%, which helps to improve the constant speed fuel efficiency by approximately 2% at a range of driving speeds exceeding 70 km/h.     

PID plus fuzzy logic method for torque control in traction control system

A Traction Control System (TCS) is used to control the driving force of an engine to prevent excessive slip when a vehicle starts suddenly or accelerates. The torque control strategy determines the driving performance of the vehicle under various drive-slip conditions. This paper presents a new torque control method for various drive-slip conditions involving abrupt changes in the road friction. This method is based on a PID plus fuzzy logic controller for driving torque regulation, which consists of a PID controller and a fuzzy logic controller. The PID controller is the fundamental component that calculates the elementary torque for traction control. In addition, the fuzzy logic controller is the compensating component that compensates for the abrupt change in the road friction. The simulation results and the experimental vehicle tests have validated that the proposed controller is effective and robust. Compared with conventional PID controllers, the driving performance under the proposed controller is greatly improved.     

A novel adaptive algorithm with an IIR filter and a variable step size for active noise control in a short duct

The intake system in an automotive engine has a short duct compared with that of the exhaust system. The filtered-x LMS (FX-LMS) algorithm has been applied to the active noise control (ANC) system in a short acoustic duct. This algorithm design is based on the FIR (finite impulse response) filter; however, it has a slow convergence issue due to a large number of zero coefficients. To improve the convergence performance, the step size of the LMS algorithm was modified from fixed to variable. However, this algorithm is still not suitable for the ANC system of a short acoustic duct because the reference signal is affected by the backward acoustic wave propagated from a secondary source. Therefore, the recursive filtered-u LMS algorithm (FU-LMS) based on the infinite impulse response (IIR) is developed to consider backward acoustic propagation. Generally, this algorithm has a stability problem. The stability issue was improved using an error-smoothing filter. In this paper, the recursive LMS algorithm with a variable step size and smoothing error filter is designed. This recursive LMS algorithm, the FU-VSSLMS algorithm, uses an IIR filter. With fast convergence and good stability, this algorithm is suitable for the ANC system in a short acoustic duct, such as the intake system of an automotive engine. This algorithm is applied to the ANC system of a short acoustic duct. The disturbance signals used as primary noise source are a sinusoidal signal embedded in white noise and the chirp signal, which has a variable instantaneous frequency. The test results demonstrate that the FU-VSSLMS algorithm has a superior convergence performance when compared with the FX-LMS and FX-LMS algorithms. The algorithm can be successfully applied to the ANC system in a short duct, such as the intake duct.     

Hybrid vehicle power management modeling and refinement

The power management strategy in many hybrid vehicles is based on expert rules and thresholds. These rule-based strategies can result in good efficiency in term of fuel economy and emissions if their thresholds and rules are accurate. However, due to the complexity and the non-linearity of the hybrid powertrain, determining accurate thresholds and rules is neither explicit nor straightforward, and experts in most cases fail to define these thresholds and rules with enough accuracy. Based on this fact, the objective of this paper is to propose a method to improve this rule-based strategy by refining its thresholds and rules. To achieve this, we used an optimization method (dynamic programming) to calculate the optimal power management, determine the optimal control signals, and extract efficient thresholds and rules that can be used in real time. Finally, simulation results for the three strategies (optimal, simple and refined strategy) are shown and discussed.     

Cooling effect of methanol on an n-heptane HCCI engine using a dual fuel system

Homogeneous charge compression ignition (HCCI) engines have the potential to raise the efficiency of reciprocating engines during partial load operation. However, the performance of the HCCI engine at high loads is restricted by severe knocking, which can be observed by the excessive pressure rise rate. This is due to the rapid combustion process occurring inside the cylinder, which does not follow the flame propagation that is seen in conventional engines. In this study, a low compression ratio of 9.5:1 for a gasoline engine was converted to operate in HCCI mode with the goal being to expand the stable operating region at high loads. Initially, pure n-heptane was used as the fuel at equivalence ratios of 0.30 to 0.58 with elevated intake charge temperatures of 180 and 90 °C, respectively. The n-heptane HCCI engine could reach a maximum performance at an indicated mean effective pressure (IMEP) of 0.38 MPa, which was larger than the performance found in the literature. To reach an even higher performance, a dual-fuel system was exploited. Methanol, as an anti-detonant additive, was introduced into the intake stream with various amounts of n-heptane at fixed equivalence ratios in the range of 0.42 to 0.52. It was found that the methanol addition cooled the mixture down prior to combustion and resulted in an increased coefficient of variation (COV). In order to maintain stable combustion and keep the pressure rise rate below the limit, the intake charge temperature should be increased. Introduction of 90% and 95% (vol/vol) hydrous methanol showed a similar trend but a lower thermal conversion efficiency and IMEP value. Therefore, a dual fuel HCCI engine could maintain a high thermal conversion efficiency across a wide load and enhance a 5% larger load compared to a pure n-heptane-fuelled HCCI engine. The hydrocarbon (HC) and carbon monoxide (CO) emissions were lower than 800 ppm and 0.10%, respectively. They were less at higher loads. The nitrogen oxides (NO _x ) emissions were below 12 ppm and were found to increase sharply at higher loads to a maximum of 23 ppm.     

Nonlinear tire-road friction control based on tire model parameter identification

A hierarchical control structure is a more suitable structural scheme for integrated chassis control. Generally, this type of structure has two main functions. The upper layer manages global control and force allocation, while the bottom layer allocates realized forces with 4 independent local tire controllers. The way to properly allocate these target forces poses a difficult task for the bottom layer. There are two key problems that require attention: obtaining the nonlinear time-varying coefficient of friction between the tire and different road surfaces and accurately tracking the desired forces from the upper layer. This paper mainly focuses on longitudinal tire-road friction allocation and control strategies that are based on the antilock braking system (ABS). Although it is difficult to precisely measure longitudinal tire-road friction forces for frequently changing road surface conditions, they can be estimated with a real-time measurement of brake force and angular acceleration at the wheels. The Magic Formula model is proposed as the reference model, and its key parameters are identified online using a constrained hybrid genetic algorithm to describe the evolution of tire-road friction with respect to the wheel slip. The desired wheel slip, with respect to the reference tire-road friction force from the top layer, is estimated with the inverse quadratic interpolation method. The tire-road friction controller of the extended anti-lock braking system (Ext-ABS) is designed through use of the nonlinear sliding mode control method. Simulation results indicate that acceptable modifications to changes in road surface conditions and adequate stability can be expected from the proposed control strategy.     

Development of a control strategy based on the transmission efficiency with mechanical loss for a dual mode power split-type hybrid electric vehicle

In this study, a control strategy for a dual mode power split-type hybrid electric vehicle (HEV) is developed based on the powertrain efficiency. To evaluate the transmission characteristics of the dual mode power split transmission (PST), a mechanical loss model of the transmission (TM loss) is constructed. The transmission efficiency, including the TM loss, is evaluated for the dual mode PST. Two control strategies for the dual mode PST are proposed. An optimal operation line (OOL) control strategy is developed to maintain a high engine thermal efficiency by controlling the engine operation point on the OOL. A speed ratio (SR) control strategy is proposed to obtain a greater transmission efficiency by shifting the engine operation point when the dual mode PST operates near the mechanical points. Using the TM loss and the proposed control strategies, a vehicle performance simulation is conducted to evaluate the performance of the two control strategies for dual mode PST. The simulation results demonstrate that, for the SR control strategy, the engine efficiency decreases because the engine operates beyond the OOL. However, the transmission efficiency of the dual mode PST increases because the PST operates near the mechanical point where the PST shows the greatest transmission efficiency. Consequently, the fuel economy of the SR control strategy is improved by 3.8% compared with the OOL control strategy.     

Robust design optimization of suspension system by using target cascading method

This study presents the robust design optimization process of suspension system for improving vehicle dynamic performance (ride comfort, handling stability). The proposed design method is so called target cascading method where the design target of the system is cascaded from a vehicle level to a suspension system level. To formalize the proposed method in the view of design process, the design problem structure of suspension system is defined as a (hierarchical) multilevel design optimization, and the design problem for each level is solved using the robust design optimization technique based on a meta-model. Then, In order to verify the proposed design concept, it designed suspension system. For the vehicle level, 44 random variables with 3% of coefficient of variance (COV) were selected and the proposed design process solved the problem by using only 88 exact analyses that included 49 analyses for the initial meta-model and 39 analyses for SAO. For the suspension level, 54 random variables with 10% of COV were selected and the optimal designs solved the problem by using only 168 exact analyses for the front suspension system. Furthermore, 73 random variables with 10% of COV were selected and optimal designs solved the problem by using only 252 exact analyses for the rear suspension system. In order to compare the vehicle dynamic performance between the optimal design model and the initial design model, the ride comfort and the handling stability was analyzed and found to be improved by 16% and by 37%, respectively. This result proves that the suggested design method of suspension system is effective and systematic.