The impact of job assignment rules for straddle carriers on the throughput of container terminals

Straddle carriers represent a critical resource in the handling of containers within a container terminal. It is essential that they are deployed in an as efficient manner as possible. The research presented in this paper is motivated by the need to critically evaluate job assignment rules for straddle carriers that operate in a multiple straddle environment. This is achieved by developing a discrete event simulation model using industrial simulation software to model a container terminal located in Melbourne, Australia. The model accounts for variables such as the number of straddle carriers needed, the speed of straddle carriers, the arrival rate of trucks, and the job assignment rule. A principal finding of the study is that increasing the number of straddles in the present set‐up from 6 to 7 has a negligible effect on daily throughput. However, an increase in the number of straddles to 7 is expected to have a profound effect on reducing the average waiting time of trucks within the terminal from over 16 minutes to under 9 minutes, a decrease of 46.5%. However, a further increase in the number of straddles results in no further increase in daily throughput. It was observed that the throughput of the terminal is very sensitive to the speeds at which straddles travel. The management of the terminal has proposed a new heuristic job assignment rule for straddles, because the present rule does not assign the jobs to straddles closest to the truck requesting to load or unload a container. As a result a new heuristic job assignment rule was tested. The simulation results revealed that both the old and new rules performed equally well using performance indicators such as average container flow time, daily throughput, average waiting time of jobs, number of jobs in the queue, and straddle utilisation. Therefore, the new rule will not improve these performance measures if implemented     

The construction and use of continuous autoregressive models for traffic indices

This article discusses the use of continuous autoregressive models to describe the behavior of traffic indices. From discretely sampled data, second-order differential equation models are constructed to represent dynamic traffic fluctuations as the response of a linear system to a stochastic forcing function. The results are compared to the more common M/G/∞ queueing model approach, and the analysis is demonstrated on time series of aircraft concentration in thirty-one enroute air traffic control sectors.     

将安全及环境保护置于一切之上

今天,我将冒着一定的风险来预言一些在下一世纪开始阶段,会出现在航运业内的某些事物的形态.很显然,我会着重谈一些IMO活动范围以内的事.     

Finite element modeling of suction anchors under combined loading

Suction anchors are subjected to inclined, quasi-horizontal or quasi-vertical loadings. The type of the structure and depth of water govern the inclination of the load. Under this load condition, suction anchor experiences a combination of horizontal and vertical translations, and rotation. Therefore the soil's reaction to this load condition can be idealized as horizontal and vertical loadings, together with a moment. The magnitude and combination of the reactions depend on the load inclination, soil property and the point at which the load is applied. The behavior of the suction anchor subjected to the combined V–H-M loading is elaborated in this paper. This is to observe the effects of soil properties on the failure mechanism and ultimate capacity of the foundation. This was achieved by applying the pure horizontal and vertical displacements, and rotation and their combinations to the foundation, on V–H, V-M and H-M spaces and the yield-locus created for each space. The general purpose finite element program DIANA was used for this study. Non-linear analysis was conducted using a simplified elastic-perfectly-plastic model with Von-Mises yield criterion for saturated and consolidated clay.     

In-car power line communications: Advanced transmission techniques

The increasing number of electronic control units (ECUs) inside a vehicle implies the need to develop and deploy on board robust, low latency and low complex telecommunication systems. In this respect, power line communications (PLC) is an attractive solution. The benefits provided by the introduction of power line communications in the in-car environment are multiple and they are related to the possibility of exploiting the existing and capillary wiring infrastructure to simplify the design of the in-vehicle data network (IVN) and, more importantly, to save weight and cost of the wiring harness. In this paper, we deal with the analysis of the performance achievable by applying innovative advanced modulation techniques to in-car measured power line channels, i.e., multicarrier (MC) and impulsive ultra wideband (I-UWB) modulation. We show that for low speed command and control applications, I-UWB is suitable since it requires lower power and lower computational efforts w.r.t. MC systems. Furthermore, we study the design of the optimal transmitted pulse to further improve the performance of I-UWB.     

Exhaust emissions and its control methods in compression ignition engines: A review

Extensive usage of automobiles has certain disadvantages and one of them is its negative effect on environment. Carbon dioxide (CO₂), carbon monoxide (CO), hydrocarbons (HC), oxides of nitrogen (NO_x), sulphur dioxide (SO₂) and particulate matter (PM) come out as harmful products during incomplete combustion from internal combustion (IC) engines. As these substances affect human health, regulatory bodies impose increasingly stringent restrictions on the level of emissions coming out from IC engines. This trend suggests the urgent need for the investigation of all aspects relevant to emissions. It is required to modify existing engine technologies and to develop a better after-treatment system to achieve the upcoming emission norms. Diesel engines are generally preferred over gasoline engines due to their undisputed benefit of fuel economy and higher torque output. However, diesel engines produce higher emissions, particularly NO_x and PM. Aftertreatment systems are costly and occupy more space, hence, in-cylinder solutions are preferred in reducing emissions. Exhaust gas recirculation (EGR) technology has been utilized previously to reduce NO_x. Though it is quite successful for small engines, problem persists with large bore engines and with high rate of EGR. EGR helps in reducing NO_x, but increases particulate emissions and fuel consumption. Many in-cylinder solutions such as lower compression ratios, modified injection characteristics, improved air intake system etc. are required along with EGR to accomplish the future emission norms. Modern combustion techniques such as low temperature combustion (LTC), homogeneous charge compression ignition (HCCI), premixed charge compression ignition (PCCI) etc. would be helpful for reducing the exhaust emissions and improving the engine performance. However, controlling of autoignition timing and achieving wider operating range are the major challenges with these techniques. A comprehensive review of diesel engine performance and emission characteristics is given in this paper.     

T��l��phoner au volant : impact sur la conduite et risque d��accident, une revue de la litt��rature

This paper gives a literature review from experimental, epidemiological and naturalistic studies, having tried to measure on the one hand, the impact of mobile phone use on driving and, on the other hand, the risk of accident associated with this practice. The overview of these studies allowed first of all to show that the driving task is altered during the period of mobile phone use, and to quantify the disturbance (experimental studies), then to verify that this disturbance can be at the origin of accidents and quantify this risk (epidemiological studies). The naturalistic studies, consisting in following-up fleet vehicles, give some more explanations and tend to confirm the results. Advantages and limits of each approach are also discussed.     

Static and tip-over stability analysis of two-chain suspension arrangements for large-scale cargo operations

Based on the Lagrange classical stability concept, the approaches and corresponding equations for determining conditions for providing a static and tip-over stability of a two-chain suspension arrangement have been developed. Specifically, it has been proven that the arrangement is in the stable position of equilibrium if the cargo centre of gravity is placed within the isosceles triangle (named as static stability triangle). The base of this triangle is the base of the secondary suspension, and its height is a function of the geometric peculiarities of the arrangement and ratio between mass of spreader and cargo unit. Comparative tip-over stability analysis of the arrangements with different geometric peculiarities and configurations has been also performed.     

Les systèmes de vélos en libre-service expliquent-ils le retour du vélo en ville ?

Many French and European cities have developed a bike sharing system since 2005. This policy may be explained in a great part by the success of the Velo??v in Lyon, which contributed to improve the image of cycling in the city. If bicycles, however, appear to find a new place in the city, one can wonder whether this is really due to bike sharing systems? What are the real uses of bicycles in contemporary cities, with or without such a system? To answer these questions, the paper starts with a literature review on bicycle in the city, to draw lessons from recent experiences of bike sharing systems. It then discusses the two cases of Lyon and Lille, which never had a bike sharing system on its own. The evolution of bicycle use is measured with a comparison of household transportation surveys in Lyon (1995 and 1998) and Lille (1998 and 2006). In both cities, the analysis reveals a rise in the proportion of healthiest citizens among urban bikers, as well as a return of bikes in dense areas. Bike sharing systems are part of such tendencies. They support them, but should not become a panacea for policies supporting bike use in the city.