谐波对牵引变压器损耗的影响

根据一个牵引变压器的损耗,提出了谐波对绕组电阻的影响.对同心式和饼式线圈的变压器进行了分析.使用二维有限元计算软件"Flux2D"进行了多种仿真,并且将其结果与实际变压器测量值进行对比,提出一个简单的定律,由此可确定2种不同类型变压器电阻随频率的变化规律.     

Validation of a schedule‐based capacity restraint transit assignment model for a large‐scale network

This paper describes the application of a capacity restraint trip assignment algorithm to a real, large‐scale transit network and the validation of the results. Unlike the conventional frequency‐based approach, the network formulation of the proposed model is dynamic and schedule‐based. Transit vehicles are assumed to operate to a set of pre‐determined schedules. Passengers are assumed to select paths based on a generalized cost function including in‐vehicle and out‐of‐vehicle time and line change penalty. The time‐varying passenger demand is loaded onto the network by a time increment simulation method, which ensures that the capacity restraint of each vehicle during passenger boarding is strictly observed. The optimal‐path and path‐loading algorithms are applied iteratively by the method of successive averages until the network converges to the predictive dynamic user equilibrium. The Hong Kong Mass Transit Railway network is used to validate the model results. The potential applications of the model are also discussed.     

MBS(R)--欧洲制动控制系统平台

克诺尔机车车辆制动公司开发了模块化的标准制动控制系统MBS,只需较少的费用就可适应欧洲铁路运输企业的各种不同要求.制动系统必须按用户的专门要求来开发.可适配的模块化MBS系统可用于欧洲各国的跨境运输,能满足欧洲不同的安全性规定.系统具有重量轻、所需安装位置小、寿命周期费用低、机车车辆使用率高的优点.Bombardier公司、德国铁路公司、瑞士和奥地利联邦铁路已从中获益.     

车轮踏面剥离试验研究

剥离是车轮踏面失效的主要类型。车轮剥离一般分为2种类型,一类是由滚动接触疲劳应力作用引起的剥离;另一类是由热作用和机械作用引起的剥离,主要有制动剥离和擦伤剥离。2种类型的车轮剥离实际上都与轮轨表面摩擦力直接相关。本文主要通过模拟试验研究轮轨摩擦力对车轮剥离的影响。     

Insights into the port training of the new European Union member states 1

The establishment and implementation of a training programme requires a training needs assessment (TNA). Without this approach, more often than not, training programmes have failed to succeed and to make such an assessment the instructional designer, i.e. the person in charge for this work, needs to follow a methodology. Unlike the other industries, the port industry has neglected the use of these methodologies, which is shown by the lack of research work published in academic journals. With a view to fill the existing gap, the paper proposes a five-step TNA methodology to be used in the port industry and applies its first three steps to investigate the port training situation in the new European Union member states. To achieve this objective, the paper is structured in the following way: puts the research work into context; addresses the role of ports; presents a port TNA methodology; explains research methodology; addresses port training issues in the new European-member states; and presents conclusions and further comments.     

Shipping and investment incentives: a trilogy Part 2. Investment incentives for shipping

This paper concentrates on the shipping industry and considers the forms of fiscal and financial incentives which are used by different governments to promote or encourage investment in their shipping industry. The analysis reduces the various packages of investment incentives and loan arrangements to a common measurement—the net present value of the package—and uses this to draw international comparisons and rankings. The results are based on different values of rates of return in the shipping industry and under certain assumptions concerning the rate of inflation and the rate of discount. Differences in loan arrangements have also been incorporated. The particular results are valid only for the specified circumstances but the methodology is generally applicable.     

The simple,compelling case for PRT

When compared with existing urban modes, Personal Rapid Transit (PRT) offers compelling advantages in every important respect. The desirable attributes of any urban mobility mode are well documented, such as minimal travel time, safety, comfort, low cost, and minimal impacts. These attributes are used to define a hypothetical, ideal urban mode. The ideal mode would possess characteristics such as no waiting, no stops, from anywhere to anywhere service, risk-free, non-polluting, and accessible to everyone at any time. Although not attainable in the real world, the ideal provides a model and benchmark for design much as the Carnot thermodynamic cycle guides the development of internal combustion engines, or ideal gases and perfect fluids are postulated in physics. A matrix format is used to present the characteristics of various modes against the desirable attributes of any mode. Modes presented are the ideal, walking, bicycles, motorcycles, automobiles, taxis, buses, rail transit, Automated Guideway Transit (AGT), and PRT. In all respects, PRT is shown to approach the ideal much more closely than competing modes.     

Adapting interactive stated response techniques to a self-completion survey

We report here on how we adapted Interactive Stated Response Methods to use in a self-completion survey of 454 California households to measure the market for electric vehicles in California. Electric vehicles are a novel product and have many features unfamiliar to consumers, in particular their home recharging capability and limited range. Reflexive techniques were designed to draw households into a deeper exploration of the lifestyle implications of electric vehicles than can be done in more typical self-completion surveys, and to stimulate key decision processes previously observed in detailed gaming interviews with 51 households. Reflexive self-completion techniques provide a middle course between typical large sample quantitative surveys and small sample, detailed gaming interviews. One of the benefits of the more intensive techniques was that participants reported finding the surveys interesting and return rates were high for a self-completion approach – over sixty percent. We review previous transportation and sociological methods which inspired our design, describe the design goals and features of our research, and summarize research results pertinent to testing the validity of our approach.     

British OSV companies in the North Sea, 1964-1997

In the mid 1960s the world OSV industry was dominated by American operators, but with the rise of the North Sea offshore industry, British entrepreneurs were given the chance to contest American dominance. By the mid 1970s British OSV companies had made great progress and, at least in the North Sea context, their principal rivals were now the Norwegians rather than the Americans. British OSV companies continued to prosper until the world oil price collapse of 1986. This blow led to a restructuring of the British OSV industry, which led, by the mid-1990s, to Stirling Shipping being the principal British OSV firm in the North Sea and OIL being the largest non-American OSV company in the world. The 1997 sale of OIL to the Americans was a blow to the British OSV sector, but British enterprise in this field still continues in the North Sea.     

Use of a probabilistic particle tracking model to simulate the Prestige oil spill

A probabilistic particle tracking model is used to simulate the oil dispersion after the Prestige wreckage. This oil spill constitutes a suitable benchmark to analyze the capabilities of a probabilistic model, since the time elapsed from wreckage to oil landing (12 days) is much longer than the reliability time associated with forecast winds, usually on the order of 3–4 days. The particle model can be run in two different modes: real time mode (when existing reliable wind fields for the event under scope) and in probabilistic mode (in absence of reliable wind fields but with historical fields corresponding to a similar period). The validity of the particle model is first evaluated in a hindcast way, running the Prestige case with the wind fields corresponding to the period November 19 to November 30, 2002, which were not available at the moment of the wreckage. Calculations show the accuracy of the model to provide the right impact point and timing. The probabilistic model is then used to simulate the same event by means of historical data. The region where the oil landed is shown to be the area with the highest probability to be impacted.