高尔夫A3型轿车行李箱盖有限元计算与方案优化设计

在对德国大众汽车公司生产的高尔夫A3型轿车行李箱盖的使用材料性能进行实验研究的基础上，建立了三维数学模型，利用I－deas工程软件对其有限元计算，并通过实地结果进行验证，最后提出了高尔A3车行李箱盖的优化方案。     

Dynamic response of offshore jacket structures under random loads

In this paper, the dynamic response of a scale model of a jacket offshore structure is investigated both theoretically and experimentally. The experiments were conducted both in air and in water. The in-water experiments were done in the towing tank of Memorial University to simulate the realistic operating conditions. The model was subjected to random wave loads. Froude's law of modeling was used to obtain the dimensions of the scale model based on the dimensions of an existing structure. The effects of varying the structure's weight, and the characteristics of the wave loading were investigated. The structure's weight was changed by adding weights to the structure's deck. A finite element model was designed to determine the dynamic response of the model. Excellent agreement between the experimental and theoretical results was obtained.The reaction force at the foundation was estimated from strain measurements and compared with the finite element calculations. Fair agreement was obtained.This work is the first stage of a project whose objective is to develop a method for structural damage detection using the free vibration response of the structure. The free vibration response will be obtained from the stationary random response of the structure using the random decrement method. Having an accurate model to describe the dynamic response of the structure is the first step in this study.     

Multiaxial stress creep rupture mechanisms of AZ31 magnesium alloy

The maximum principal stresses, von Mises effective stresses and principal facet stresses at the time of creep rupture were compared in uniaxial, biaxial, and triaxial stress states for AZ31 magnesium alloy. The creep rupture of this alloy was experimentally controlled by cavitation, which was the result of a low damage tolerance, λ. Creep deformation could be correlated with the von Mises effective stress parameter. The failure-mechanism control parameter governing the stress state coincided with the experimental results of the rupture of the materials under multiaxial stress states. Finally, the theoretical prediction based on constrained cavity growth and continuous nucleation agreed with the experimental rupture data to within a factor of three.     

Parking policies in large cities in Germany

This article deals with highly motorized large West German cities of about 200,000 inhabitants and more, which usually provide reasonable public transport systems. Illegal parking with shares of about 40 to 50% of the total parking is widespread in the parking problem areas of those cities, especially in the inner-city residential and mixed-use areas. Parking spaces are demanded by residents, employees, customers and visitors, and by delivery and service traffic. The different characteristics of parking demands by different user groups are discussed. The total parking supply consists of public and private spaces. The share of private spaces is about 40 to 50% of the total parking spaces in German cities. The amount of car traffic generated by a parking space depends on parking duration and parking turnover, as well as on search traffic. So the change of a space from long-duration use of an employee to short-duration of customers — as often discussed in parking concepts — generates at least five-fold car traffic. The measurements and effects of parking control of public spaces as well as the parking regulations in zoning ordinances, restrictions on the construction of new private parking spaces and park-and-ride are discussed. Finally, a parking concept methodology — using the example of Frankfurt am Main — is discussed.     

Measuring the potential for automobile fuel savings in the US: The impact of obesity

High rates of oil consumption and obesity in the US have become important socioeconomic concerns. While these concerns may seem unrelated at first, growing obesity rates in the US increase fuel consumption by adding passenger weight to vehicles. This paper estimates the additional amount of fuel (i.e., gasoline) consumed annually by noncommercial passenger highway vehicles in the US due to passenger overweight and obesity. The mathematical model presented in this paper estimates that as many as one billion additional gallons of gasoline are consumed each year due to overweight and obesity in the US, accounting for up to 0.8% of the fuel consumed by these vehicles annually. This additional fuel consumption causes carbon dioxide emissions of up to 20 billion pounds or more, accounting for up to 0.5% of the annual carbon dioxide emissions in the transportation sector.     

Transportation agencies experiences with decision support systems for airport ground access planning

This article reports on a field investigation into the ways that transportation agencies use quantitative and qualitative information for making strategic decisions regarding airport ground access. The study analyzes the value of this information for planning airport ground access improvements at seven major international airport sites.The major finding of the research is that quantitative modeling for strategic decision support is very difficult, costly and time consuming. Modelers are confident that the models are accurate and reliable but executives generally lack confidence in the results. Transportation officials believe that the information supplied is flawed by a number of defects that minimize its value for strategic decision makers. The information defects described in this article provide an analysis of the structural difficulty of using quantitative modeling for transportation problems of strategic importance. To date, qualitative information is not frequently used, but some transportation agencies are considering its application to designing transportation services. Although this study is limited to airport ground access, the authors feel that this evidence, in conjunction with the evidence from other studies in the transportation area, dictates a need for wariness in the development of decision support systems for transportation planners. Developers of decision support systems for transportation planners must be aware of modeling costs and defects and consider how to improve the timeliness, relevance and credibility of information quantitative models provide transportation executives. Fundamentally it is important to recognize that decision makers tend, either singularly or in concert with other individuals or groups, to be the champions of a long-term vision for the community. When modeling produces inconsistent or wide ranging results that contradict their position, decision makers may not only discard modeling activities, but lose confidence in the models altogether. As a consequence, transportation planners are faced with the challenge of how to improve quantitative modeling. The most reliable and effective means for improvement is incorporation of qualitative techniques which provide greater understanding of customer perceptions and human behavior.     

考虑疲劳强度和减轻质量的转向架构架设计

用有限元法对各种载荷工况下的转向架构架进行了疲劳分析,利用人工神经网络和遗传算法最大程度地减轻了转向架构架的质量.     

Economic analysis of Japanese air pollution regulation: An optimal retirement problem under the vehicle type regulation in the NOx–particulate matter law

This paper examines the vehicle type regulation that was introduced under the Automobile Nitrogen Oxides–Particulate Matter Law to mitigate air pollution in Japanese metropolitan areas. The vehicle type regulation effectively sets the timing for vehicle retirement by initial registration year and type. However, there was no consideration of cost or efficiency in choosing the timing of retirement. We solve an optimal problem to maximize the social net benefit under the current framework of the vehicle type regulation. The analysis finds that the net benefit can more than double if the optimal retirement timing is chosen. Further, we find that even a simple alteration of the retirement timing can increase the social net benefit by 13%.     

Modified lateral control of an autonomous vehicle by look-ahead and look-down sensing

This paper presents a modified lateral control method for an autonomous vehicle with both look-ahead and look-down sensing systems. To cope with sensor noise and modeling uncertainty in the lateral control of the vehicle, a modified LMI-based H lateral controller was proposed, which uses the look-ahead information of the lateral offset error measured at the front of vehicle and the look-down information of the vehicle yaw angle error between the reference lane and the centerline of the vehicle. To verify the safety and the performance of the lateral control, a scaled-down vehicle was developed, and the positioning of the vehicle was estimated with USAT. The proposed controller, which uses both look-ahead and look-down information, was tested for lane changing and reference lane tracking with both simulation and experiment. The simulation and experimental results show that the proposed controller has better tracking and handling performance compared with a controller that uses only the look-ahead information of the target heading angle error.