Operating strategy for gasoline/diesel dual-fuel premixed compression ignition in a light-duty diesel engine

Environmental problems have become a major issue for diesel engine development. Although emission aftertreatment systems such as DPFs (diesel particulate filters), LNTs (lean NOx traps) and SCR (selective catalytic reduction) have been used in diesel vehicles, the manufacturing cost increase caused by this equipment can be hard to be control. Thus, it is better for engine emissions to be reduced by improving the combustion system. A dual-fuel combustion concept is a recommended method to improve a combustion system and effectively reduce emissions. Low reactivity fuel including gasoline and natural gas, which was supplied to the intake port by the FPI (port fuel injector), improved the premixed air-fuel mixture conditions before ignition. Additionally, a small amount of high reactivity fuel, in this case diesel, was injected into the cylinder directly as an ignition source. This dual-fuel combustion promises lower levels of NOx (nitrogen oxide) and PM (particulate matter) emissions due to the elimination of local rich regions in the cylinder. However, it is challenging to control the dual-fuel combustion because the combustion stability and efficiency deteriorate due to the lack of ignition source and reactivity. Thus, it is important to establish an appropriate dual-fuel operating strategy to achieve stable, high efficiency and low emission operation. As a result of this research, a detailed operating method of dual-fuel PCI (premixed compression ignition) was introduced in detail at a low speed and low load condition by using a single cylinder diesel engine. Engine operating parameters including the gasoline ratio, a diesel injection strategy consisting of multiple injectors and timing, the EGR (exhaust gas recirculation) rate and the intake pressure were controlled to satisfy the low ISNOx (indicated specific NOx) and PM emissions levels (0.21 g/kWh and 0.1 FSN, 0.040 g/kWh, respectively) as per the EURO-6 regulation without any after-treatment systems. The results emphasized that a well-constructed dual-fuel PCI operating strategy showed low NOx and PM emissions and high GIE (gross indicated fuel conversion efficiency) with excellent combustion stability.     

Development of a valve and optimization of a tube for self-inflating tire

Worldwide, the tire market requires safe and eco-friendly tires. In this study, a self-inflating tire (SIT) was studied and manufactured. Self-inflating tire refers to a technique for maintaining appropriate tire pressure. An internal regulator senses when tire inflation pressure has dropped below the set air pressure. The tire boosts air through the valve when rolling and compressed air enters into the tire. This procedure keeps the tire air pressure at an appropriate level and increases tire safety. In this study, a regulator was used as a negative-pressure system. A check valve was selected the minute flow check valve depending on the shape of the configured system. In addition, the material of the tube was developed with excellent physical properties and resistances (elastic rebound, working temperature, etc.) owing to its complete compression and restoration. A tube performance tester was developed and a computer aided engineering (CAE) model was modeled for comparison with the test results. Using the tester and model, it was possible to optimize the shape of the tube and regulator. Finally, the reliability of the study was verified through the prototype test. The developed equipment and systems can be used for the manufacture of high-performance and safe tires.     

Demonstration of vehicular visible light communication based on LED headlamp

With the emergence of LED lighting, IT convergence technology using the visible spectrum of LEDs, such as Visible Light Communication (VLC), has been highlighted. Among the many VLC applications, vehicular VLCs based on LED headlamps and transportation lighting infrastructure, such as street lamps, traffic lights, etc., are considered good alternatives for Intelligent Transportation Systems (ITS) or Active Safety applications. This paper introduces a demonstration system of vehicle-to-vehicle (V2V) VLC based on LED headlamps. By applying an inverse 4-PPM modulation scheme satisfying a 75 % dimming level under the light distribution regulation of LED headlamp, the proposed system showed its capability for V2V VLC with a 10 kbps data rate for more than 30 m under day time conditions. By measuring the BER performance according to distance, outdoor V2V VLC was possible for more than 30 m even in the day time.     

Laboratory alignment procedure for improving reproducibility of tyre wet grip measurement

Since 2012, the Korean and EU governments have been running a tyre labelling system. All tyres sold in Korea have to carry a label that displays information of two performance criteria: rolling resistance and wet grip. The rolling resistance of the tyres determines their fuel efficiency grading, and the wet grip of the tyres determines their braking safety grading. The rolling resistance and wet grip measurements must be reproducible, so the same tests on the same tyres in different laboratories must produce the same results to ensure a fair comparison between tyres from different suppliers. In addition, a good reproducibility of testing results prevents market surveillance authorities from obtaining results different from those provided by suppliers when testing the same tyres. The laboratory alignment procedure for the rolling resistance measurements was developed and published as the EU Commission Regulation No. 1235 in 2011. However, the laboratory alignment procedure for the wet grip measurements has not yet been developed. Therefore, there are many differences in the wet grip test results among test laboratories throughout the world. The new procedure that is proposed for the wet grip measurement alignment for tyre testing laboratories can improve the reproducibility of the wet grip testing results, and five laboratory alignment tests were carried out between KATECH and five other test laboratories in the world to evaluate the results of the proposed procedure.     

Influence of pilot injection on combustion characteristics and emissions in a DI diesel engine fueled with diesel and DME

This work experimentally investigates how the dwell time between pilot injection and main injection influences combustion and emissions characteristics (NOx, CO, THC and smoke) in a single-cylinder DI diesel engine. The experiments were conducted using two fuel injection systems according to the fuel type, diesel or dimethyl ether (DME), due to the different fuel characteristics. The injection strategy is accomplished by varying the dwell time (10°CA, 16°CA and 22°CA) between injections at five main injection timings (?4°CA aTDC, ?2°CA aTDC, 0°CA aTDC, 2°CA aTDC and 4°CA aTDC). Results from pilot-main injection conditions are compared with those shown in single injection conditions to better demonstrate the potential of pilot injection. It was found that pilot injection is highly effective for lowering heat-release rates with smooth pressure traces regardless of the fuel type. Pilot injection also offers high potential to maintain or increase the BMEP; even the combustion-timing is retarded to suppress the NOx emission formation. Overall, NOx emission formation was suppressed more by the combustion phasing retard effect, and not the pilot injection effect considered in this study. Comparison of the emissions for different fuel types shows that CO and HC emissions have low values below 100 ppm for DME operation in both single injection and pilot-main injection. However, NOx emission is slightly higher in the earlier main injection timings (?4°CA aTDC, ?2°CA aTDC) than diesel injections. Pilot injection was found to be more effective with DME for reducing the amount of NOx emission with combustion retardation, which indicates a level of NOx emission similar to that of diesel. Although the diesel pilot-main injection conditions show higher smoke emission than single-injection condition, DME has little smoke emission regardless of injection strategy.