基于离散-连续耦合的钢桥面铺装剪切模拟

层间剪切破坏是钢桥面铺装主要病害之一,为了对钢桥面铺装复合结构层间剪切行为进行研究,基于三维离散-连续耦合方法建立了钢桥面铺装复合结构仿真模型,分析得出30℃条件下钢桥面铺装层间剪切破坏行为的变化规律,分析剪切速率对钢桥面铺装层间剪切受力状态的影响。研究结果表明过高或过低的行车速度对钢桥面铺装层都不利。对比分析离散-连续模型与离散元模型模拟结果发现,离散-连续模型计算结果更加符合实际情况。     

近40年来中日海上交流研究综述与展望——以跨国人物为主线

中国的日本研究在明代、近代、现代出现过三次高潮,近40年来经过学习、追赶、创新的多个阶段,在局部的“点”甚至特定的“面”上,实现对日本的超越。中日文化交流史是一门新兴的交叉学科,不仅内涵丰富而且外延宽广,但文化的创造、传承、流播、接受、模仿、改良、创新诸环节,均离不开“人”的主导作用。基于此,本文以“跨国人物”为线,从“赴日中国人研究”“来华日本人研究”两个层面,概述近40年来中日海上交流领域所取得的研究成就,突出中国学者的创新点与前沿性,同时指出存在的问题与努力的方向。     

高速公路路面病害原因和维修措施浅谈

由于交通量的逐年增加,重载车辆增多,高速公路超负荷运转,路面的平整性、抗高温性、抗疲劳性以及抗滑性等特点减弱,导致高速公路在使用几年之后出现车辙、裂缝、坑槽等多种病害。文章以G15甬台温高速公路台州一期路面维修专项工程为例,对路面病害成因进行分析,并针对性的提出维修方案和措施,使沥青路面恢复其使用功能。     

Geometric calibration algorithm of polarization camera using planar patterns

Polarization pattern provides additional information besides spectral signatures. It can be used in many applications, such as navigation, defect detection and object identification. A novel polarization camera composed of four synchronized cameras is proposed, and it can realize real-time polarization measurement. This study particularly concentrates on the geometric calibration of the system. The projection model is analyzed and the multi-camera calibration algorithm is proposed. Firstly, each camera is calibrated separately using planar patterns, and then the geometric calibration algorithms are performed. Due to the geometrical constraint, a global optimization method results in smaller estimation uncertainties. A mean rotation error of 0.025° and a mean translation error of 0.26mm are achieved after geometric calibration. The images are rectified to establish a correspondence among cameras and are combined to acquire the polarization measurement. The polarization pattern of the skylight is measured by the system and the results are consistent with the previous studies.     

Research of legal affair simulation based on Petri net

Legal affair simulation is on the basis of information technology, and can simulate legal scene. College students do legal experiments with virtual reality scene. This helps to train college students. Petri net has not only strict math definition to analyze the dynamic behavior of models, but also intuitive graphic expression. Petri net is used to model for legal process. Reduction rules of Petri net are used to analyze the correctness of the system. At last Java Business Process Management (JBPM) technology is used to realize legal affair simulation models, models are transformed into flow charts. Simulation software deduces processes of legal affair. Many college students have improved their ability with the software, the fact proves that the method is effective.     

Compensation of pressure enthalpy effects on temperature fields for throttling of high-pressure real gas

For the pressure enthalpy of high pressure pneumatics, the computational fluid dynamics (CFD) simulation based on ideal gas assumption fails to obtain the real temperature information. Therefore, we propose a method to compensate the pressure enthalpy of throttling for CFD simulation based on ideal gas assumption. Firstly, the pressure enthalpy is calculated for the pressure range of 0.101 to 30 MPa and the temperature range of 190 to 298 K based on Soave-Redlich-Kwong (S-R-K) equation. Then, a polynomial fitting equation is applied to practical application in the above mentioned range. The basic idea of the compensation method is to convert the pressure enthalpy difference between inlet air and nodes into the compensation temperature. In the above temperature and pressure range, the compensated temperature is close to the real one, and the relative temperature drop error is below 10%. This error is mainly caused by the velocity difference of the orifice between the real and ideal gas models. Finally, this compensation method performs an icing analysis for practical high pressure slide pilot valve.     

Effect of orthogonal stiffeners on the stability of axially compressed steel jacking pipe

Load conditions for steel pipe-jacking are complex during the construction stage. The stability of steel jacking pipe has been an increasingly important problem as jacking forces, pipe diameters and jacking distances increase. However, there are no standards for pipe reinforcement, for prevention of buckling, or for remedying pipe that buckles when being jacked axially. Past experience suggests that stiffeners can effectively reinforce the structure. This study analyzes the effect of different stiffeners on the stability of steel jacking pipe under axial compression using finite element analysis. The results suggest that the stability of steel jacking pipe can be significantly improved by using orthogonal stiffeners, in terms of engineering costs and construction space inside the pipe. Based on current engineering practice, the application of orthogonal stiffeners is discussed. This study provides a useful reference for the design and construction of steel jacking pipe.     

Calculation of strain amplification matrix for strain invariant failure theory based on representative volume element models with periodical boundary condition

Strain invariant failure theory (SIFT) is a micro-mechanics-based failure theory for multi-scale failure analysis of composite materials originally proposed by Gosse and Christensen. In this paper, the approach for obtaining strain amplification matrix which is a key step for the execution of SIFT is improved by adopting representative volume element (RVE) finite element models considering periodical boundary condition, based on which more actual deformation mode is reflected. The deformation modes and strain data at the characteristic points of the centroid cell of multi-cell RVE model are analyzed and taken as a reference. It can be concluded that more reasonable deformation mode and relationship between the micro-mechanical and macro-mechanical strain states are obtained by employing the new model. Finally, numerical examples are provided to illustrate the determination of strain amplification factors within the RVEs considering periodical boundary condition at the characteristic points.     

国内公共汽电车客运车站发展现状及问题分析

为了提出我国城市公共汽电车客运车站的发展建议,为制定我国城市公共汽电车客运车站的相关标准奠定研究基础,从而促进我国城市公共汽电车客运车站服务水平的提升。本文总结了当前我国城市公共汽电车客运车站在规模、位置设置、通行能力、受其他交通方式影响以及车站设施等5个方面所存在的问题,分析了由于定制公交、互联网大巴线路和新能源公交车辆发展对我国城市公共汽电车客运车站发展带来的新需求,进而提出了对于我国城市公共汽电车客运车站发展的两点建议,包括完善城市公共汽电车客运车站标准和明确车站建设与维护机制。     

城市综合交通体系规划回顾与展望

回顾改革开放以来中国城市综合交通体系规划在规划定位、规划目标、内容体例、技术方法、规划实施等方面的实践和探索。总结规划编制工作的基本特点:以问题为导向、融合城市总体规划、提倡以人为本理念、广泛应用定量技术方法。指出规划编制和实施过程中存在的不足:规划地位和作用认识不清、价值理念与实际行动脱节、规划实施评估环节缺失、规划管理体制机制缺乏、相关法规技术标准陈旧。结合城市交通发展新趋势,展望未来城市综合交通体系规划的重点方向:强化多规融合、强调以人为核心的规划、加强规划评估和滚动编制、加强技术创新与行业规范、深化政策保障机制研究。